[PATCH 1/4] drm: add generic zpos property
Daniel Vetter
daniel at ffwll.ch
Thu May 12 13:36:07 UTC 2016
On Thu, May 12, 2016 at 12:28:19PM +0200, Benjamin Gaignard wrote:
> From: Marek Szyprowski <m.szyprowski at samsung.com>
>
> This patch adds support for generic plane's zpos property property with
> well-defined semantics:
> - added zpos properties to plane and plane state structures
> - added helpers for normalizing zpos properties of given set of planes
> - well defined semantics: planes are sorted by zpos values and then plane
> id value if zpos equals
>
> Normalized zpos values are calculated automatically when generic
> muttable zpos property has been initialized. Drivers can simply use
> plane_state->normalized_zpos in their atomic_check and/or plane_update
> callbacks without any additional calls to DRM core.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
>
> Compare to Marek's original patch zpos property is now specific to each
> plane and no more to the core.
> Normalize function take care of the range of per plane defined range
> before set normalized_zpos.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
>
> Cc: Inki Dae <inki.dae at samsung.com>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Joonyoung Shim <jy0922.shim at samsung.com>
> Cc: Seung-Woo Kim <sw0312.kim at samsung.com>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
> Cc: Tobias Jakobi <tjakobi at math.uni-bielefeld.de>
> Cc: Gustavo Padovan <gustavo at padovan.org>
> Cc: vincent.abriou at st.com
> Cc: fabien.dessenne at st.com
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
When resending you must have a changelog somewhere. At elast in the cover
letter, better is per-patch. Otherwise reviewers need to dig out the old
threads and compare themselves.
-Daniel
> ---
> Documentation/DocBook/gpu.tmpl | 10 ++
> drivers/gpu/drm/Makefile | 2 +-
> drivers/gpu/drm/drm_atomic.c | 4 +
> drivers/gpu/drm/drm_atomic_helper.c | 6 +
> drivers/gpu/drm/drm_blend.c | 229 ++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/drm_crtc_internal.h | 3 +
> include/drm/drm_crtc.h | 28 +++++
> 7 files changed, 281 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/drm_blend.c
>
> diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
> index 9dd48f7..0df6abb 100644
> --- a/Documentation/DocBook/gpu.tmpl
> +++ b/Documentation/DocBook/gpu.tmpl
> @@ -2151,6 +2151,16 @@ void intel_crt_init(struct drm_device *dev)
> the underlying hardware).</td>
> </tr>
> <tr>
> + <td valign="top" > "zpos" </td>
> + <td valign="top" >RANGE</td>
> + <td valign="top" >Min= driver dependent, Max= driver dependent</td>
> + <td valign="top" >Plane</td>
> + <td valign="top" >Plane's 'z' position during blending operation (0 for background, highest for frontmost).
> + If two planes assigned to same CRTC have equal zpos values, the plane with higher plane
> + id is treated as closer to front. Can be IMMUTABLE if driver doesn't support changing
> + planes' order. Exact value range is driver dependent.</td>
> + </tr>
> + <tr>
> <td rowspan="20" valign="top" >i915</td>
> <td rowspan="2" valign="top" >Generic</td>
> <td valign="top" >"Broadcast RGB"</td>
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 2bd3e5a..df88253 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -2,7 +2,7 @@
> # Makefile for the drm device driver. This driver provides support for the
> # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
>
> -drm-y := drm_auth.o drm_bufs.o drm_cache.o \
> +drm-y := drm_auth.o drm_bufs.o drm_blend.o drm_cache.o \
> drm_context.o drm_dma.o \
> drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \
> drm_lock.o drm_memory.o drm_drv.o drm_vm.o \
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 86e89db..bd457ca 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -700,6 +700,8 @@ int drm_atomic_plane_set_property(struct drm_plane *plane,
> state->src_h = val;
> } else if (property == config->rotation_property) {
> state->rotation = val;
> + } else if (property == plane->zpos_property) {
> + state->zpos = val;
> } else if (plane->funcs->atomic_set_property) {
> return plane->funcs->atomic_set_property(plane, state,
> property, val);
> @@ -756,6 +758,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
> *val = state->src_h;
> } else if (property == config->rotation_property) {
> *val = state->rotation;
> + } else if (property == plane->zpos_property) {
> + *val = state->zpos;
> } else if (plane->funcs->atomic_get_property) {
> return plane->funcs->atomic_get_property(plane, state, property, val);
> } else {
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 997fd21..f10652f 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -32,6 +32,8 @@
> #include <drm/drm_atomic_helper.h>
> #include <linux/fence.h>
>
> +#include "drm_crtc_internal.h"
> +
> /**
> * DOC: overview
> *
> @@ -587,6 +589,10 @@ drm_atomic_helper_check_planes(struct drm_device *dev,
> struct drm_plane_state *plane_state;
> int i, ret = 0;
>
> + ret = drm_atomic_helper_normalize_zpos(dev, state);
> + if (ret)
> + return ret;
> +
> for_each_plane_in_state(state, plane, plane_state, i) {
> const struct drm_plane_helper_funcs *funcs;
>
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> new file mode 100644
> index 0000000..eef59bb
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -0,0 +1,229 @@
> +/*
> + * Copyright (C) 2016 Samsung Electronics Co.Ltd
> + * Authors:
> + * Marek Szyprowski <m.szyprowski at samsung.com>
> + *
> + * DRM core plane blending related functions
> + *
> + * Permission to use, copy, modify, distribute, and sell this software and its
> + * documentation for any purpose is hereby granted without fee, provided that
> + * the above copyright notice appear in all copies and that both that copyright
> + * notice and this permission notice appear in supporting documentation, and
> + * that the name of the copyright holders not be used in advertising or
> + * publicity pertaining to distribution of the software without specific,
> + * written prior permission. The copyright holders make no representations
> + * about the suitability of this software for any purpose. It is provided "as
> + * is" without express or implied warranty.
> + *
> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> + * OF THIS SOFTWARE.
> + */
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_crtc.h>
> +#include <linux/export.h>
> +#include <linux/slab.h>
> +#include <linux/sort.h>
> +
> +#include "drm_internal.h"
> +
> +/**
> + * drm_plane_create_zpos_property - create mutable zpos property
> + * @plane: drm plane
> + * @min: minimal possible value of zpos property
> + * @max: maximal possible value of zpos property
> + *
> + * This function initializes generic mutable zpos property and enables support
> + * for it in drm core. Drivers can then attach this property to planes to enable
> + * support for configurable planes arrangement during blending operation.
> + * Once mutable zpos property has been enabled, the DRM core will automatically
> + * calculate drm_plane_state->normalized_zpos values. Usually min should be set
> + * to 0 and max to maximal number of planes for given crtc - 1.
> + *
> + * If zpos of some planes cannot be changed (like fixed background or
> + * cursor/topmost planes), driver should adjust min/max values and assign those
> + * planes immutable zpos property with lower or higher values (for more
> + * information, see drm_mode_create_zpos_immutable_property() function). In such
> + * case driver should also assign proper initial zpos values for all planes in
> + * its plane_reset() callback, so the planes will be always sorted properly.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_plane_create_zpos_property(struct drm_plane *plane,
> + unsigned int min, unsigned int max)
> +{
> + struct drm_property *prop;
> +
> + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max);
> + if (!prop)
> + return -ENOMEM;
> +
> + drm_object_attach_property(&plane->base, prop, min);
> +
> + plane->zpos_property = prop;
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_create_zpos_property);
> +
> +/**
> + * drm_plane_create_zpos_immutable_property - create immuttable zpos property
> + * @plane: drm plane
> + * @min: minimal possible value of zpos property
> + * @max: maximal possible value of zpos property
> + *
> + * This function initializes generic immutable zpos property and enables
> + * support for it in drm core. Using this property driver lets userspace
> + * to get the arrangement of the planes for blending operation and notifies
> + * it that the hardware (or driver) doesn't support changing of the planes'
> + * order.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
> + unsigned int min, unsigned int max)
> +{
> + struct drm_property *prop;
> +
> + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE,
> + "zpos", min, max);
> + if (!prop)
> + return -ENOMEM;
> +
> + drm_object_attach_property(&plane->base, prop, min);
> +
> + plane->zpos_property = prop;
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property);
> +
> +static int drm_atomic_state_zpos_cmp(const void *a, const void *b)
> +{
> + const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
> + const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
> +
> + if (sa->zpos != sb->zpos)
> + return sa->zpos - sb->zpos;
> + else
> + return sa->plane->base.id - sb->plane->base.id;
> +}
> +
> +/**
> + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values
> + * @crtc: crtc with planes, which have to be considered for normalization
> + * @crtc_state: new atomic state to apply
> + *
> + * This function checks new states of all planes assigned to given crtc and
> + * calculates normalized zpos value for them. Planes are compared first by their
> + * zpos values, then by plane id (if zpos equals). Plane with lowest zpos value
> + * is at the bottom. The plane_state->normalized_zpos is then filled with unique
> + * values from 0 to number of active planes in crtc minus one.
> + *
> + * RETURNS
> + * Zero for success or -errno
> + */
> +int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc,
> + struct drm_crtc_state *crtc_state)
> +{
> + struct drm_atomic_state *state = crtc_state->state;
> + struct drm_device *dev = crtc->dev;
> + int total_planes = dev->mode_config.num_total_plane;
> + struct drm_plane_state **states;
> + struct drm_plane *plane;
> + int i, zpos, n = 0;
> + int ret = 0;
> +
> + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n",
> + crtc->base.id, crtc->name);
> +
> + states = kmalloc(total_planes * sizeof(*states), GFP_KERNEL);
> + if (!states)
> + return -ENOMEM;
> +
> + /*
> + * Normalization process might create new states for planes which
> + * normalized_zpos has to be recalculated.
> + */
> + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) {
> + struct drm_plane_state *plane_state =
> + drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto done;
> + }
> + states[n++] = plane_state;
> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n",
> + plane->base.id, plane->name,
> + plane_state->zpos);
> + }
> +
> + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL);
> +
> + for (i = 0, zpos = 0; i < n; i++, zpos++) {
> + plane = states[i]->plane;
> +
> + zpos = max_t(int, zpos, states[i]->zpos);
> +
> + states[i]->normalized_zpos = zpos;
> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n",
> + plane->base.id, plane->name, zpos);
> + }
> + crtc_state->zpos_changed = true;
> +
> +done:
> + kfree(states);
> + return ret;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_crtc_normalize_zpos);
> +
> +/**
> + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for all
> + * crtcs
> + * @dev: DRM device
> + * @state: atomic state of DRM device
> + *
> + * This function calculates normalized zpos value for all modified planes in
> + * the provided atomic state of DRM device. For more information, see
> + * drm_atomic_helper_crtc_normalize_zpos() function.
> + *
> + * RETURNS
> + * Zero for success or -errno
> + */
> +int drm_atomic_helper_normalize_zpos(struct drm_device *dev,
> + struct drm_atomic_state *state)
> +{
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *crtc_state;
> + struct drm_plane *plane;
> + struct drm_plane_state *plane_state;
> + int i, ret = 0;
> +
> + for_each_plane_in_state(state, plane, plane_state, i) {
> + crtc = plane_state->crtc;
> + if (!crtc)
> + continue;
> + if (plane->state->zpos != plane_state->zpos) {
> + crtc_state =
> + drm_atomic_get_existing_crtc_state(state, crtc);
> + crtc_state->zpos_changed = true;
> + }
> + }
> +
> + for_each_crtc_in_state(state, crtc, crtc_state, i) {
> + if (crtc_state->plane_mask != crtc->state->plane_mask ||
> + crtc_state->zpos_changed) {
> + ret = drm_atomic_helper_crtc_normalize_zpos(crtc,
> + crtc_state);
> + if (ret)
> + return ret;
> + }
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos);
> diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h
> index a78c138..37d9068 100644
> --- a/drivers/gpu/drm/drm_crtc_internal.h
> +++ b/drivers/gpu/drm/drm_crtc_internal.h
> @@ -42,3 +42,6 @@ int drm_atomic_get_property(struct drm_mode_object *obj,
> int drm_mode_atomic_ioctl(struct drm_device *dev,
> void *data, struct drm_file *file_priv);
>
> +/* drm_blend.c */
> +int drm_atomic_helper_normalize_zpos(struct drm_device *dev,
> + struct drm_atomic_state *state);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index d1559cd..921c93f 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -305,6 +305,7 @@ struct drm_plane_helper_funcs;
> * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
> * @active_changed: crtc_state->active has been toggled.
> * @connectors_changed: connectors to this crtc have been updated
> + * @zpos_changed: zpos values of planes on this crtc have been updated
> * @color_mgmt_changed: color management properties have changed (degamma or
> * gamma LUT or CSC matrix)
> * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
> @@ -340,6 +341,7 @@ struct drm_crtc_state {
> bool mode_changed : 1;
> bool active_changed : 1;
> bool connectors_changed : 1;
> + bool zpos_changed : 1;
> bool color_mgmt_changed : 1;
>
> /* attached planes bitmask:
> @@ -1263,6 +1265,9 @@ struct drm_connector {
> * plane (in 16.16)
> * @src_w: width of visible portion of plane (in 16.16)
> * @src_h: height of visible portion of plane (in 16.16)
> + * @zpos: priority of the given plane on crtc (optional)
> + * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
> + * for given crtc
> * @state: backpointer to global drm_atomic_state
> */
> struct drm_plane_state {
> @@ -1283,6 +1288,10 @@ struct drm_plane_state {
> /* Plane rotation */
> unsigned int rotation;
>
> + /* Plane zpos */
> + unsigned int zpos;
> + unsigned int normalized_zpos;
> +
> struct drm_atomic_state *state;
> };
>
> @@ -1516,6 +1525,7 @@ enum drm_plane_type {
> * @properties: property tracking for this plane
> * @type: type of plane (overlay, primary, cursor)
> * @state: current atomic state for this plane
> + * @zpos_property: zpos property for this plane
> */
> struct drm_plane {
> struct drm_device *dev;
> @@ -1546,6 +1556,8 @@ struct drm_plane {
> const struct drm_plane_helper_funcs *helper_private;
>
> struct drm_plane_state *state;
> +
> + struct drm_property *zpos_property;
> };
>
> /**
> @@ -2554,6 +2566,22 @@ extern struct drm_property *drm_mode_create_rotation_property(struct drm_device
> extern unsigned int drm_rotation_simplify(unsigned int rotation,
> unsigned int supported_rotations);
>
> +int drm_plane_atomic_set_zpos_property(struct drm_plane *plane,
> + struct drm_plane_state *state,
> + struct drm_property *property,
> + uint64_t val);
> +
> +int drm_plane_atomic_get_zpos_property(struct drm_plane *plane,
> + const struct drm_plane_state *state,
> + struct drm_property *property,
> + uint64_t *val);
> +
> +int drm_plane_create_zpos_property(struct drm_plane *plane,
> + unsigned int min, unsigned int max);
> +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
> + unsigned int min,
> + unsigned int max);
> +
> /* Helpers */
>
> static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
> --
> 1.9.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list