[PATCH] Revert "drm/imx: Remove of_node assignment from ipuv3-crtc driver probe"

Chris Ruehl chris.ruehl at gtsys.com.hk
Wed May 18 01:02:28 UTC 2016


Hi
On Wednesday, May 18, 2016 01:11 AM, Fabio Estevam wrote:
> Commit 407c9eba789767 ("drm/imx: Remove of_node assignment from ipuv3-crtc
> driver probe") causes the IPU to be non-functional, so better to
> revert it to avoid such regression.
>
> This reverts commit 407c9eba789767feb68b42eb2d65db68584e06c0.
>
> Cc: <stable at vger.kernel.org> # 4.4.x
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Revert patch tested with 4.6 - imx6d and imx6dl boards

[    2.292032] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    2.305742] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops)


Regards
Chris

> ---
>   drivers/gpu/drm/imx/ipuv3-crtc.c | 34 ++++++++++++++++++++++++++++++++++
>   1 file changed, 34 insertions(+)
>
> diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
> index dee8e8b..006753d 100644
> --- a/drivers/gpu/drm/imx/ipuv3-crtc.c
> +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
> @@ -520,6 +520,28 @@ err_put_resources:
>   	return ret;
>   }
>
> +static struct device_node *ipu_drm_get_port_by_id(struct device_node *parent,
> +						  int port_id)
> +{
> +	struct device_node *port;
> +	int id, ret;
> +
> +	port = of_get_child_by_name(parent, "port");
> +	while (port) {
> +		ret = of_property_read_u32(port, "reg", &id);
> +		if (!ret && id == port_id)
> +			return port;
> +
> +		do {
> +			port = of_get_next_child(parent, port);
> +			if (!port)
> +				return NULL;
> +		} while (of_node_cmp(port->name, "port"));
> +	}
> +
> +	return NULL;
> +}
> +
>   static int ipu_drm_bind(struct device *dev, struct device *master, void *data)
>   {
>   	struct ipu_client_platformdata *pdata = dev->platform_data;
> @@ -562,11 +584,23 @@ static const struct component_ops ipu_crtc_ops = {
>   static int ipu_drm_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
> +	struct ipu_client_platformdata *pdata = dev->platform_data;
>   	int ret;
>
>   	if (!dev->platform_data)
>   		return -EINVAL;
>
> +	if (!dev->of_node) {
> +		/* Associate crtc device with the corresponding DI port node */
> +		dev->of_node = ipu_drm_get_port_by_id(dev->parent->of_node,
> +						      pdata->di + 2);
> +		if (!dev->of_node) {
> +			dev_err(dev, "missing port@%d node in %s\n",
> +				pdata->di + 2, dev->parent->of_node->full_name);
> +			return -ENODEV;
> +		}
> +	}
> +
>   	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>   	if (ret)
>   		return ret;
>

-- 
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521

Disclaimer: http://www.gtsys.com.hk/email/classified.html


More information about the dri-devel mailing list