[PATCH 4/6] drm/amdgpu/si: use dma instance offset array directly
Alex Deucher
alexdeucher at gmail.com
Fri May 20 21:50:37 UTC 2016
No need for a local variable. Also, fix a few registers
that did not have the per instance offset properly added.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
drivers/gpu/drm/amd/amdgpu/si_dma.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/si_dma.c b/drivers/gpu/drm/amd/amdgpu/si_dma.c
index 7e65b64..4dad157 100644
--- a/drivers/gpu/drm/amd/amdgpu/si_dma.c
+++ b/drivers/gpu/drm/amd/amdgpu/si_dma.c
@@ -154,16 +154,15 @@ static void si_dma_stop(struct amdgpu_device *adev)
static int si_dma_start(struct amdgpu_device *adev)
{
struct amdgpu_ring *ring;
- u32 rb_cntl, dma_cntl, ib_cntl, rb_bufsz, reg_offset;
+ u32 rb_cntl, dma_cntl, ib_cntl, rb_bufsz;
int i, r;
uint64_t rptr_addr;
for (i = 0; i < adev->sdma.num_instances; i++) {
ring = &adev->sdma.instance[i].ring;
- reg_offset = sdma_offsets[i];
- WREG32(DMA_SEM_INCOMPLETE_TIMER_CNTL + reg_offset, 0);
- WREG32(DMA_SEM_WAIT_FAIL_TIMER_CNTL + reg_offset, 0);
+ WREG32(DMA_SEM_INCOMPLETE_TIMER_CNTL + sdma_offsets[i], 0);
+ WREG32(DMA_SEM_WAIT_FAIL_TIMER_CNTL + sdma_offsets[i], 0);
/* Set ring buffer size in dwords */
rb_bufsz = order_base_2(ring->ring_size / 4);
@@ -171,36 +170,36 @@ static int si_dma_start(struct amdgpu_device *adev)
#ifdef __BIG_ENDIAN
rb_cntl |= DMA_RB_SWAP_ENABLE | DMA_RPTR_WRITEBACK_SWAP_ENABLE;
#endif
- WREG32(DMA_RB_CNTL + reg_offset, rb_cntl);
+ WREG32(DMA_RB_CNTL + sdma_offsets[i], rb_cntl);
/* Initialize the ring buffer's read and write pointers */
- WREG32(DMA_RB_RPTR + reg_offset, 0);
- WREG32(DMA_RB_WPTR + reg_offset, 0);
+ WREG32(DMA_RB_RPTR + sdma_offsets[i], 0);
+ WREG32(DMA_RB_WPTR + sdma_offsets[i], 0);
rptr_addr = adev->wb.gpu_addr + (ring->rptr_offs * 4);
- WREG32(DMA_RB_RPTR_ADDR_LO, lower_32_bits(rptr_addr));
- WREG32(DMA_RB_RPTR_ADDR_HI, upper_32_bits(rptr_addr) & 0xFF);
+ WREG32(DMA_RB_RPTR_ADDR_LO + sdma_offsets[i], lower_32_bits(rptr_addr));
+ WREG32(DMA_RB_RPTR_ADDR_HI + sdma_offsets[i], upper_32_bits(rptr_addr) & 0xFF);
rb_cntl |= DMA_RPTR_WRITEBACK_ENABLE;
- WREG32(DMA_RB_BASE + reg_offset, ring->gpu_addr >> 8);
+ WREG32(DMA_RB_BASE + sdma_offsets[i], ring->gpu_addr >> 8);
/* enable DMA IBs */
ib_cntl = DMA_IB_ENABLE | CMD_VMID_FORCE;
#ifdef __BIG_ENDIAN
ib_cntl |= DMA_IB_SWAP_ENABLE;
#endif
- WREG32(DMA_IB_CNTL + reg_offset, ib_cntl);
+ WREG32(DMA_IB_CNTL + sdma_offsets[i], ib_cntl);
- dma_cntl = RREG32(DMA_CNTL + reg_offset);
+ dma_cntl = RREG32(DMA_CNTL + sdma_offsets[i]);
dma_cntl &= ~CTXEMPTY_INT_ENABLE;
- WREG32(DMA_CNTL + reg_offset, dma_cntl);
+ WREG32(DMA_CNTL + sdma_offsets[i], dma_cntl);
ring->wptr = 0;
- WREG32(DMA_RB_WPTR + reg_offset, ring->wptr << 2);
+ WREG32(DMA_RB_WPTR + sdma_offsets[i], ring->wptr << 2);
- WREG32(DMA_RB_CNTL + reg_offset, rb_cntl | DMA_RB_ENABLE);
+ WREG32(DMA_RB_CNTL + sdma_offsets[i], rb_cntl | DMA_RB_ENABLE);
ring->ready = true;
--
2.5.5
More information about the dri-devel
mailing list