[PATCH 4/4] rcar-du: add R8A7794 TCON support

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri May 27 21:33:10 UTC 2016


Hi Sergei,

Thank you for the patch.

On Friday 29 Apr 2016 00:05:33 Sergei Shtylyov wrote:
> Now that we have the TCON encoder driver, we can start enabling TCON support
> for the  R-Car SoCs. We have only tested the code on R8A7794 so far, so 
> let it  be the first supported SoC...

Please also update the DT bindings.

> Based on a large patch by Andrey Gusakov.
> 
> Signed-off-by: Andrey Gusakov <andrey.gusakov at cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
> 
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c |   10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> Index: renesas/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> ===================================================================
> --- renesas.orig/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ renesas/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -116,9 +116,7 @@ static const struct rcar_du_device_info
> 
>  		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
> 
>  	.num_crtcs = 2,
>  	.routes = {
> -		/* R8A7794 has two RGB outputs and one (currently unsupported)
> -		 * TCON output.
> -		 */
> +		/* R8A7794 has two RGB outputs and one TCON output. */
>  		[RCAR_DU_OUTPUT_DPAD0] = {
>  			.possible_crtcs = BIT(0),
>  			.encoder_type = DRM_MODE_ENCODER_NONE,
> @@ -129,8 +127,14 @@ static const struct rcar_du_device_info
>  			.encoder_type = DRM_MODE_ENCODER_NONE,
>  			.port = 1,
>  		},
> +		[RCAR_DU_OUTPUT_TCON] = {
> +			.possible_crtcs = BIT(0),

According to the datasheet TCON can be connected to both DU0 and DU1.

> +			.encoder_type = DRM_MODE_ENCODER_TCON,
> +			.port = 2,
> +		},
>  	},
>  	.num_lvds = 0,
> +	.num_tcon = 1,
>  };
> 
>  static const struct rcar_du_device_info rcar_du_r8a7795_info = {

-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list