[PATCH 0/6] drm/i915: Remaining PSR fixes

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Here's a repost of my PSR fixes, and one straggler from Daniel.

One interesting thing I noticed is that my SKL actually hits the PSR setup
time vs. vblank length check, so after these patches that machine won't
actually use PSR. The panel does support a lower refresh rate timing as well
though which doesn't suffer from this limitation, so I hacked the code to
use that mode instead, and PSR did seem to work without problems. With the
original mode I had some screen stalls while running xonotic, which I'm
going to assume were due to the setup time exceeding the safe limit.

I also hooked up the PSR interrupts for BDW+ and pushed the patches to [1],
but I'm not including those patches here since the PSR interrupts don't
seem to gain us anything useful in practice.

[1] git://github.com/vsyrjala/linux.git psr_interrupts

Daniel Vetter (1):
  drm/i915/psr: Skip aux handeshake if the vbt tells us to

Ville Syrjälä (5):
  drm/dp: Add drm_dp_psr_setup_time()
  drm/dp: Add drm_dp_psr_need_train_on_exit()
  drm/i915: Check PSR setup time vs. vblank length
  drm/i915: Ask the sink whether training is required when exiting PSR
    main-link off mode
  drm/i915: Move psr.link_standby setup to intel_psr_match_conditions()

 drivers/gpu/drm/drm_dp_helper.c     | 46 ++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h    |  2 ++
 drivers/gpu/drm/i915/intel_psr.c    | 64 +++++++++++++++++++++++++------------
 drivers/gpu/drm/i915/intel_sprite.c |  6 ++--
 include/drm/drm_dp_helper.h         |  3 ++
 5 files changed, 97 insertions(+), 24 deletions(-)

-- 
2.7.4