[PATCH 0/3] drm/tilcdc: Add bridge support and sync-lost flood recovery

[Jyri Sarha]

The first patch is an independent on and I've been testing it for
quite a while now.

The tfp410 bridge driver and the tilcdc bridge support are tested with
BeagleBone DVI-D Cape Rev A3. The tfp410 bridge driver is missing a
lot of features, because the DVI-D cape does not have too many wires
connected. They missing features can be added later when they are
needed.

Jyri Sarha (3):
  drm/tilcdc: Recover from sync lost error flood by resetting the LCDC
  drm/bridge: Add ti-ftp410 HDMI transmitter driver
  drm/tilcdc: Add drm bridge support for attaching drm bridge drivers

 .../bindings/display/bridge/ti,tfp410.txt          |  30 ++++
 .../devicetree/bindings/display/tilcdc/tilcdc.txt  |   7 +-
 drivers/gpu/drm/bridge/Kconfig                     |   7 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/ti-tfp410.c                 | 199 +++++++++++++++++++++
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c               |  26 ++-
 drivers/gpu/drm/tilcdc/tilcdc_drv.c                |   7 +-
 drivers/gpu/drm/tilcdc/tilcdc_drv.h                |   2 +
 drivers/gpu/drm/tilcdc/tilcdc_external.c           | 140 +++++++++++++--
 drivers/gpu/drm/tilcdc/tilcdc_external.h           |   1 +
 10 files changed, 397 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
 create mode 100644 drivers/gpu/drm/bridge/ti-tfp410.c

-- 
1.9.1