[PATCH 2/2] drm/edid: Consider alternate cea timings to be the same VIC

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Thu Nov 3 12:53:29 UTC 2016


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

CEA-861 specifies that the vertical front porch may vary by one or two
lines for specific VICs. Up to now we've only considered a mode to match
the VIC if it matched the shortest possible vertical front porch length
(as that is the variant we store in cea_modes[]). Let's allow our VIC
matching to work with the other timings variants as well so that that
we'll send out the correct VIC if the variant actually used isn't the
one with the shortest vertical front porch.

Cc: Shashank Sharma <shashank.sharma at intel.com>
Cc: Andrzej Hajda <a.hajda at samsung.com>
Cc: Adam Jackson <ajax at redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/drm_edid.c | 66 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 54 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7eec18925b70..728990fee4ef 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2613,6 +2613,41 @@ cea_mode_alternate_clock(const struct drm_display_mode *cea_mode)
 	return clock;
 }
 
+static bool
+cea_mode_alternate_timings(u8 vic, struct drm_display_mode *mode)
+{
+	/*
+	 * For certain VICs the spec allows the vertical
+	 * front porch to vary by one or two lines.
+	 *
+	 * cea_modes[] stores the variant with the shortest
+	 * vertical front porch. We can adjust the mode to
+	 * get the other variants by simply increasing the
+	 * vertical front porch length.
+	 */
+	BUILD_BUG_ON(edid_cea_modes[8].vtotal != 262 ||
+		     edid_cea_modes[9].vtotal != 262 ||
+		     edid_cea_modes[12].vtotal != 262 ||
+		     edid_cea_modes[13].vtotal != 262 ||
+		     edid_cea_modes[23].vtotal != 312 ||
+		     edid_cea_modes[24].vtotal != 312 ||
+		     edid_cea_modes[27].vtotal != 312 ||
+		     edid_cea_modes[28].vtotal != 312);
+
+	if (((vic == 8 || vic == 9 ||
+	      vic == 12 || vic == 13) && mode->vtotal < 263) ||
+	    ((vic == 23 || vic == 24 ||
+	      vic == 27 || vic == 28) && mode->vtotal < 314)) {
+		mode->vsync_start++;
+		mode->vsync_end++;
+		mode->vtotal++;
+
+		return true;
+	}
+
+	return false;
+}
+
 static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_match,
 					     unsigned int clock_tolerance)
 {
@@ -2622,19 +2657,21 @@ static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_m
 		return 0;
 
 	for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
-		const struct drm_display_mode *cea_mode = &edid_cea_modes[vic];
+		struct drm_display_mode cea_mode = edid_cea_modes[vic];
 		unsigned int clock1, clock2;
 
 		/* Check both 60Hz and 59.94Hz */
-		clock1 = cea_mode->clock;
-		clock2 = cea_mode_alternate_clock(cea_mode);
+		clock1 = cea_mode.clock;
+		clock2 = cea_mode_alternate_clock(&cea_mode);
 
 		if (abs(to_match->clock - clock1) > clock_tolerance &&
 		    abs(to_match->clock - clock2) > clock_tolerance)
 			continue;
 
-		if (drm_mode_equal_no_clocks(to_match, cea_mode))
-			return vic;
+		do {
+			if (drm_mode_equal_no_clocks_no_stereo(to_match, &cea_mode))
+				return vic;
+		} while (cea_mode_alternate_timings(vic, &cea_mode));
 	}
 
 	return 0;
@@ -2655,18 +2692,23 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
 		return 0;
 
 	for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
-		const struct drm_display_mode *cea_mode = &edid_cea_modes[vic];
+		struct drm_display_mode cea_mode = edid_cea_modes[vic];
 		unsigned int clock1, clock2;
 
 		/* Check both 60Hz and 59.94Hz */
-		clock1 = cea_mode->clock;
-		clock2 = cea_mode_alternate_clock(cea_mode);
+		clock1 = cea_mode.clock;
+		clock2 = cea_mode_alternate_clock(&cea_mode);
 
-		if ((KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock1) ||
-		     KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock2)) &&
-		    drm_mode_equal_no_clocks_no_stereo(to_match, cea_mode))
-			return vic;
+		if (KHZ2PICOS(to_match->clock) != KHZ2PICOS(clock1) &&
+		    KHZ2PICOS(to_match->clock) != KHZ2PICOS(clock2))
+			continue;
+
+		do {
+			if (drm_mode_equal_no_clocks_no_stereo(to_match, &cea_mode))
+				return vic;
+		} while (cea_mode_alternate_timings(vic, &cea_mode));
 	}
+
 	return 0;
 }
 EXPORT_SYMBOL(drm_match_cea_mode);
-- 
2.7.4



More information about the dri-devel mailing list