[PATCH] drm/exynos/hdmi: refactor infoframe code
Inki Dae
inki.dae at samsung.com
Mon Nov 7 01:45:10 UTC 2016
2016년 10월 26일 21:36에 Andrzej Hajda 이(가) 쓴 글:
> Use core helpers to generate infoframes and generate vendor frame if necessary.
>
> Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
> ---
> drivers/gpu/drm/exynos/exynos_hdmi.c | 141 ++++++++++-------------------------
> drivers/gpu/drm/exynos/regs-hdmi.h | 2 +
> 2 files changed, 42 insertions(+), 101 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index e8fb6ef..1bb2df7 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -47,19 +47,6 @@
>
> #define HOTPLUG_DEBOUNCE_MS 1100
>
> -/* AVI header and aspect ratio */
> -#define HDMI_AVI_VERSION 0x02
> -#define HDMI_AVI_LENGTH 0x0d
> -
> -/* AUI header info */
> -#define HDMI_AUI_VERSION 0x01
> -#define HDMI_AUI_LENGTH 0x0a
> -
> -/* AVI active format aspect ratio */
> -#define AVI_SAME_AS_PIC_ASPECT_RATIO 0x08
> -#define AVI_4_3_CENTER_RATIO 0x09
> -#define AVI_16_9_CENTER_RATIO 0x0a
> -
> enum hdmi_type {
> HDMI_TYPE13,
> HDMI_TYPE14,
> @@ -131,7 +118,6 @@ struct hdmi_context {
> bool dvi_mode;
> struct delayed_work hotplug_work;
> struct drm_display_mode current_mode;
> - u8 cea_video_id;
> const struct hdmi_driver_data *drv_data;
>
> void __iomem *regs;
> @@ -681,6 +667,13 @@ static inline void hdmi_reg_writev(struct hdmi_context *hdata, u32 reg_id,
> }
> }
>
> +static inline void hdmi_reg_write_buf(struct hdmi_context *hdata, u32 reg_id,
> + u8 *buf, int size)
> +{
> + for (reg_id = hdmi_map_reg(hdata, reg_id); size; --size, reg_id += 4)
> + writel(*buf++, hdata->regs + reg_id);
> +}
> +
> static inline void hdmi_reg_writemask(struct hdmi_context *hdata,
> u32 reg_id, u32 value, u32 mask)
> {
> @@ -762,93 +755,50 @@ static int hdmi_clk_set_parents(struct hdmi_context *hdata, bool to_phy)
> return ret;
> }
>
> -static u8 hdmi_chksum(struct hdmi_context *hdata,
> - u32 start, u8 len, u32 hdr_sum)
> -{
> - int i;
> -
> - /* hdr_sum : header0 + header1 + header2
> - * start : start address of packet byte1
> - * len : packet bytes - 1 */
> - for (i = 0; i < len; ++i)
> - hdr_sum += 0xff & hdmi_reg_read(hdata, start + i * 4);
> -
> - /* return 2's complement of 8 bit hdr_sum */
> - return (u8)(~(hdr_sum & 0xff) + 1);
> -}
> -
> -static void hdmi_reg_infoframe(struct hdmi_context *hdata,
> - union hdmi_infoframe *infoframe)
> +static void hdmi_reg_infoframes(struct hdmi_context *hdata)
> {
> - u32 hdr_sum;
> - u8 chksum;
> - u8 ar;
> + union hdmi_infoframe frm;
> + u8 buf[25];
> + int ret;
>
> if (hdata->dvi_mode) {
> - hdmi_reg_writeb(hdata, HDMI_VSI_CON,
> - HDMI_VSI_CON_DO_NOT_TRANSMIT);
> hdmi_reg_writeb(hdata, HDMI_AVI_CON,
> HDMI_AVI_CON_DO_NOT_TRANSMIT);
> + hdmi_reg_writeb(hdata, HDMI_VSI_CON,
> + HDMI_VSI_CON_DO_NOT_TRANSMIT);
> hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_NO_TRAN);
> return;
> }
>
> - switch (infoframe->any.type) {
> - case HDMI_INFOFRAME_TYPE_AVI:
> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frm.avi,
> + &hdata->current_mode);
> + if (ret >= 0)
Seems above condition is not clear becuase drm_hdmi_avi_infoframe_from_display_mode function returns 0 or negative value.
> + ret = hdmi_avi_infoframe_pack(&frm.avi, buf, sizeof(buf));
> + if (ret > 0) {
> hdmi_reg_writeb(hdata, HDMI_AVI_CON, HDMI_AVI_CON_EVERY_VSYNC);
I think above code should be called when drm_hdmi_avi_infoframe_from_display_mode function returned 0 and the value from hdmi_avi_infoframe_pack function is more than 1.
> - hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->any.type);
> - hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1,
> - infoframe->any.version);
> - hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->any.length);
> - hdr_sum = infoframe->any.type + infoframe->any.version +
> - infoframe->any.length;
> -
> - /* Output format zero hardcoded ,RGB YBCR selection */
> - hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(1), 0 << 5 |
> - AVI_ACTIVE_FORMAT_VALID |
> - AVI_UNDERSCANNED_DISPLAY_VALID);
> -
> - /*
> - * Set the aspect ratio as per the mode, mentioned in
> - * Table 9 AVI InfoFrame Data Byte 2 of CEA-861-D Standard
> - */
> - ar = hdata->current_mode.picture_aspect_ratio;
> - switch (ar) {
> - case HDMI_PICTURE_ASPECT_4_3:
> - ar |= AVI_4_3_CENTER_RATIO;
> - break;
> - case HDMI_PICTURE_ASPECT_16_9:
> - ar |= AVI_16_9_CENTER_RATIO;
> - break;
> - case HDMI_PICTURE_ASPECT_NONE:
> - default:
> - ar |= AVI_SAME_AS_PIC_ASPECT_RATIO;
> - break;
> - }
> - hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(2), ar);
> + hdmi_reg_write_buf(hdata, HDMI_AVI_HEADER0, buf, ret);
> + } else {
> + DRM_INFO("%s: invalid AVI infoframe (%d)\n", __func__, ret);
If drm_hdmi_avi_infoframe_from_display_mode function returns 0 on success, then above message will be printed out. Seems not reasonable.
> + }
>
> - hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(4), hdata->cea_video_id);
> + ret = drm_hdmi_vendor_infoframe_from_display_mode(&frm.vendor.hdmi,
> + &hdata->current_mode);
> + if (ret >= 0)
Ditto.
> + ret = hdmi_vendor_infoframe_pack(&frm.vendor.hdmi, buf,
> + sizeof(buf));
> + if (ret > 0) {
> + hdmi_reg_writeb(hdata, HDMI_VSI_CON, HDMI_VSI_CON_EVERY_VSYNC);
> + hdmi_reg_write_buf(hdata, HDMI_VSI_HEADER0, buf, ret);
Also above codes should be called when drm_hdmi_vendor_infoframe_from_display_mode function returned 0 and the value from hdmi_vendor_infoframe_pack function is more than 1.
> + }
>
> - chksum = hdmi_chksum(hdata, HDMI_AVI_BYTE(1),
> - infoframe->any.length, hdr_sum);
> - DRM_DEBUG_KMS("AVI checksum = 0x%x\n", chksum);
> - hdmi_reg_writeb(hdata, HDMI_AVI_CHECK_SUM, chksum);
> - break;
> - case HDMI_INFOFRAME_TYPE_AUDIO:
> - hdmi_reg_writeb(hdata, HDMI_AUI_CON, 0x02);
> - hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->any.type);
> - hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1,
> - infoframe->any.version);
> - hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->any.length);
> - hdr_sum = infoframe->any.type + infoframe->any.version +
> - infoframe->any.length;
> - chksum = hdmi_chksum(hdata, HDMI_AUI_BYTE(1),
> - infoframe->any.length, hdr_sum);
> - DRM_DEBUG_KMS("AUI checksum = 0x%x\n", chksum);
> - hdmi_reg_writeb(hdata, HDMI_AUI_CHECK_SUM, chksum);
> - break;
> - default:
> - break;
> + ret = hdmi_audio_infoframe_init(&frm.audio);
> + if (ret >= 0) {
Ditto.
> + frm.audio.channels = 2;
> + ret = hdmi_audio_infoframe_pack(&frm.audio, buf, sizeof(buf));
> + }
> + if (ret > 0) {
> + hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_EVERY_VSYNC);
> + hdmi_reg_write_buf(hdata, HDMI_AUI_HEADER0, buf, ret);
Also above codes should be called when hdmi_audio_infoframe_init function returned 0 and the value from hdmi_audio_infoframe_pack function is more than 1.
> }
> }
>
> @@ -1127,8 +1077,6 @@ static void hdmi_start(struct hdmi_context *hdata, bool start)
>
> static void hdmi_conf_init(struct hdmi_context *hdata)
> {
> - union hdmi_infoframe infoframe;
> -
> /* disable HPD interrupts from HDMI IP block, use GPIO instead */
> hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
> HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
> @@ -1164,15 +1112,7 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
> hdmi_reg_writeb(hdata, HDMI_V13_AUI_CON, 0x02);
> hdmi_reg_writeb(hdata, HDMI_V13_ACR_CON, 0x04);
> } else {
> - infoframe.any.type = HDMI_INFOFRAME_TYPE_AVI;
> - infoframe.any.version = HDMI_AVI_VERSION;
> - infoframe.any.length = HDMI_AVI_LENGTH;
> - hdmi_reg_infoframe(hdata, &infoframe);
> -
> - infoframe.any.type = HDMI_INFOFRAME_TYPE_AUDIO;
> - infoframe.any.version = HDMI_AUI_VERSION;
> - infoframe.any.length = HDMI_AUI_LENGTH;
> - hdmi_reg_infoframe(hdata, &infoframe);
> + hdmi_reg_infoframes(hdata);
>
> /* enable AVI packet every vsync, fixes purple line problem */
> hdmi_reg_writemask(hdata, HDMI_CON_1, 2, 3 << 5);
> @@ -1458,7 +1398,6 @@ static void hdmi_mode_set(struct drm_encoder *encoder,
> "INTERLACED" : "PROGRESSIVE");
>
> drm_mode_copy(&hdata->current_mode, m);
> - hdata->cea_video_id = drm_match_cea_mode(mode);
> }
>
> static void hdmi_set_refclk(struct hdmi_context *hdata, bool on)
> diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h
> index 169667a..a0507dc 100644
> --- a/drivers/gpu/drm/exynos/regs-hdmi.h
> +++ b/drivers/gpu/drm/exynos/regs-hdmi.h
> @@ -361,9 +361,11 @@
>
> /* AUI bit definition */
> #define HDMI_AUI_CON_NO_TRAN (0 << 0)
> +#define HDMI_AUI_CON_EVERY_VSYNC (1 << 1)
>
> /* VSI bit definition */
> #define HDMI_VSI_CON_DO_NOT_TRANSMIT (0 << 0)
> +#define HDMI_VSI_CON_EVERY_VSYNC (1 << 1)
>
> /* HDCP related registers */
> #define HDMI_HDCP_SHA1(n) HDMI_CORE_BASE(0x7000 + 4 * (n))
>
More information about the dri-devel
mailing list