[RFC][PATCH 3/3] drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection

[Laurent Pinchart]

Hi John,

Thank you for the patch.

On Monday 21 Nov 2016 16:37:32 John Stultz wrote:
> From: Archit Taneja <architt at codeaurora.org>
> 
> On some adv7511 implementations, we can get some spurious
> disconnect signals which can cause monitor probing to fail.
> 
> This patch enables HPD (hot plug detect) interrupt support
> which allows the monitor to be properly re-initialized when
> the spurious disconnect signal goes away.
> 
> This also enables proper hotplug support.
> 
> Cc: David Airlie <airlied at linux.ie>
> Cc: Archit Taneja <architt at codeaurora.org>
> Cc: Wolfram Sang <wsa+renesas at sang-engineering.com>
> Cc: Lars-Peter Clausen <lars at metafoo.de>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: dri-devel at lists.freedesktop.org
> Originally-by: Archit Taneja <architt at codeaurora.org>
> [jstultz: Added proper commit message]
> Signed-off-by: John Stultz <john.stultz at linaro.org>

This looks good to me.

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 2114a4c..889cf36
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -338,7 +338,7 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
>  		 * Still, let's be safe and stick to the documentation.
>  		 */
>  		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
> -			     ADV7511_INT0_EDID_READY);
> +			     ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD);
>  		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
>  			     ADV7511_INT1_DDC_ERROR);
>  	}
> @@ -825,6 +825,10 @@ static int adv7511_bridge_attach(struct drm_bridge
> *bridge) if (adv->type == ADV7533)
>  		ret = adv7533_attach_dsi(adv);
> 
> +	if (adv->i2c_main->irq)
> +		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
> +				ADV7511_INT0_HPD);
> +
>  	return ret;
>  }

-- 
Regards,

Laurent Pinchart