[PATCH v2 02/13] devicetree/bindings: display: Add bindings for LVDS panels

[Thierry Reding]

On Sat, Nov 19, 2016 at 05:28:02AM +0200, Laurent Pinchart wrote:
> LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A.
> Multiple incompatible data link layers have been used over time to
> transmit image data to LVDS panels. This binding supports display panels
> compatible with the JEIDA-59-1999, Open-LDI and VESA SWPG
> specifications.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> ---
>  .../bindings/display/panel/panel-lvds.txt          | 120 +++++++++++++++++++++
>  1 file changed, 120 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> new file mode 100644
> index 000000000000..b938269f841e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> @@ -0,0 +1,120 @@
> +LVDS Display Panel
> +==================
> +
> +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> +incompatible data link layers have been used over time to transmit image data
> +to LVDS panels. This bindings supports display panels compatible with the
> +following specifications.
> +
> +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> +1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> +Semiconductor
> +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> +Electronics Standards Association (VESA)
> +
> +Device compatible with those specifications have been marketed under the
> +FPD-Link and FlatLink brands.
> +
> +
> +Required properties:
> +
> +- compatible: Shall contain "panel-lvds" in addition to a mandatory
> +  panel-specific compatible string defined in individual panel bindings. The
> +  "panel-lvds" value shall never be used on its own.

What good is it if it shall never be used on its own? The above sounds
to me like the panel-specific compatible string implies the LVDS
binding, in a way that many compatible strings imply the simple binding.
Note that initially we did the very same thing with "panel-simple", only
to realize that it's completely redundant because it is never used.

> +- width-mm: See panel-common.txt.
> +- height-mm: See panel-common.txt.
> +- data-mapping: The color signals mapping order, "jeida-18", "jeida-24"
> +  or "vesa-24".
> +
> +Optional properties:
> +
> +- label: See panel-common.txt.
> +- gpios: See panel-common.txt.
> +- backlight: See panel-common.txt.
> +- data-mirror: If set, reverse the bit order described in the data mappings
> +  below on all data lanes, transmitting bits for slots 6 to 0 instead of
> +  0 to 6.
> +
> +Required nodes:
> +
> +- panel-timing: See panel-common.txt.
> +- ports: See panel-common.txt. These bindings require a single port subnode
> +  corresponding to the panel LVDS input.

Looks like I should go read the patch that introduces panel-common.txt
first...

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20161122/a11ae106/attachment.sig>