[PATCH v4 2/4] dt-bindings: Move "ti, tfp410.txt" from display/ti to display/bridge

[Jyri Sarha]

Move "ti,tfp410.txt" from display/ti to display/bridge before adding
generic (non omapdrm/dss specific) implementation and new features.

Signed-off-by: Jyri Sarha <jsarha at ti.com>
---
 .../bindings/display/bridge/ti,tfp410.txt          | 41 ++++++++++++++++++++++
 .../devicetree/bindings/display/ti/ti,tfp410.txt   | 41 ----------------------
 2 files changed, 41 insertions(+), 41 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
 delete mode 100644 Documentation/devicetree/bindings/display/ti/ti,tfp410.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
new file mode 100644
index 0000000..2cbe32a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
@@ -0,0 +1,41 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+
+Required nodes:
+- Video port 0 for DPI input
+- Video port 1 for DVI output
+
+Example
+-------
+
+tfp410: encoder at 0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			tfp410_in: endpoint at 0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			tfp410_out: endpoint at 0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/ti/ti,tfp410.txt b/Documentation/devicetree/bindings/display/ti/ti,tfp410.txt
deleted file mode 100644
index 2cbe32a..0000000
--- a/Documentation/devicetree/bindings/display/ti/ti,tfp410.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-TFP410 DPI to DVI encoder
-=========================
-
-Required properties:
-- compatible: "ti,tfp410"
-
-Optional properties:
-- powerdown-gpios: power-down gpio
-
-Required nodes:
-- Video port 0 for DPI input
-- Video port 1 for DVI output
-
-Example
--------
-
-tfp410: encoder at 0 {
-	compatible = "ti,tfp410";
-	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port at 0 {
-			reg = <0>;
-
-			tfp410_in: endpoint at 0 {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		port at 1 {
-			reg = <1>;
-
-			tfp410_out: endpoint at 0 {
-				remote-endpoint = <&dvi_connector_in>;
-			};
-		};
-	};
-};
-- 
1.9.1