[PATCH v2] ARM: dts: da850: add the mstpri and ddrctl nodes
Bartosz Golaszewski
bgolaszewski at baylibre.com
Wed Nov 23 10:27:42 UTC 2016
2016-11-22 23:23 GMT+01:00 David Lechner <david at lechnology.com>:
> On 11/15/2016 05:00 AM, Bartosz Golaszewski wrote:
>>
>> Add the nodes for the MSTPRI configuration and DDR2/mDDR memory
>> controller drivers to da850.dtsi.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>> ---
>> v1 -> v2:
>> - moved the priority controller node above the cfgchip node
>> - renamed added nodes to better reflect their purpose
>>
>> arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 1bb1f6d..412eec6 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -210,6 +210,10 @@
>> };
>>
>> };
>> + prictrl: priority-controller at 14110 {
>> + compatible = "ti,da850-mstpri";
>> + reg = <0x14110 0x0c>;
>
>
> I think we should add status = "disabled"; here and let boards opt in.
>
>> + };
>> cfgchip: chip-controller at 1417c {
>> compatible = "ti,da830-cfgchip", "syscon",
>> "simple-mfd";
>> reg = <0x1417c 0x14>;
>> @@ -451,4 +455,8 @@
>> 1 0 0x68000000 0x00008000>;
>> status = "disabled";
>> };
>> + memctrl: memory-controller at b0000000 {
>> + compatible = "ti,da850-ddr-controller";
>> + reg = <0xb0000000 0xe8>;
>
>
> same here. status = "disabled";
>
>> + };
>> };
>>
Hi David,
I did that initially[1][2] and it was rejected by Kevin[3] and Laurent[4].
FYI this patch has already been queued by Sekhar.
Best regards,
Bartosz Golaszewski
[1] https://www.spinics.net/lists/arm-kernel/msg539638.html
[2] http://www.spinics.net/lists/devicetree/msg148575.html
[3] http://www.spinics.net/lists/devicetree/msg148667.html
[4] http://www.spinics.net/lists/devicetree/msg148655.html
More information about the dri-devel
mailing list