[PATCH v4 04/10] drm/tilcdc: Add tilcdc_write_mask() to tilcdc_regs.h
Jyri Sarha
jsarha at ti.com
Fri Nov 25 09:09:47 UTC 2016
Add tilcdc_write_mask() for handling register field wider than one bit
and mask values for those fields.
Signed-off-by: Jyri Sarha <jsarha at ti.com>
---
drivers/gpu/drm/tilcdc/tilcdc_regs.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_regs.h b/drivers/gpu/drm/tilcdc/tilcdc_regs.h
index d195b65..d69a940 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_regs.h
+++ b/drivers/gpu/drm/tilcdc/tilcdc_regs.h
@@ -34,11 +34,14 @@
/* LCDC DMA Control Register */
#define LCDC_DMA_BURST_SIZE(x) ((x) << 4)
+#define LCDC_DMA_BURST_SIZE_MASK ((0x7) << 4)
#define LCDC_DMA_BURST_1 0x0
#define LCDC_DMA_BURST_2 0x1
#define LCDC_DMA_BURST_4 0x2
#define LCDC_DMA_BURST_8 0x3
#define LCDC_DMA_BURST_16 0x4
+#define LCDC_DMA_FIFO_THRESHOLD(x) ((x) << 8)
+#define LCDC_DMA_FIFO_THRESHOLD_MASK ((0x3) << 8)
#define LCDC_V1_END_OF_FRAME_INT_ENA BIT(2)
#define LCDC_V2_END_OF_FRAME0_INT_ENA BIT(8)
#define LCDC_V2_END_OF_FRAME1_INT_ENA BIT(9)
@@ -46,10 +49,12 @@
/* LCDC Control Register */
#define LCDC_CLK_DIVISOR(x) ((x) << 8)
+#define LCDC_CLK_DIVISOR_MASK ((0xFF) << 8)
#define LCDC_RASTER_MODE 0x01
/* LCDC Raster Control Register */
#define LCDC_PALETTE_LOAD_MODE(x) ((x) << 20)
+#define LCDC_PALETTE_LOAD_MODE_MASK ((0x3) << 20)
#define PALETTE_AND_DATA 0x00
#define PALETTE_ONLY 0x01
#define DATA_ONLY 0x02
@@ -75,7 +80,9 @@
/* LCDC Raster Timing 2 Register */
#define LCDC_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
+#define LCDC_AC_BIAS_TRANSITIONS_PER_INT_MASK ((0xF) << 16)
#define LCDC_AC_BIAS_FREQUENCY(x) ((x) << 8)
+#define LCDC_AC_BIAS_FREQUENCY_MASK ((0xFF) << 8)
#define LCDC_SYNC_CTRL BIT(25)
#define LCDC_SYNC_EDGE BIT(24)
#define LCDC_INVERT_PIXEL_CLOCK BIT(22)
@@ -140,6 +147,12 @@ static inline u32 tilcdc_read(struct drm_device *dev, u32 reg)
return ioread32(priv->mmio + reg);
}
+static inline void tilcdc_write_mask(struct drm_device *dev, u32 reg,
+ u32 val, u32 mask)
+{
+ tilcdc_write(dev, reg, (tilcdc_read(dev, reg) & ~mask) | (val & mask));
+}
+
static inline void tilcdc_set(struct drm_device *dev, u32 reg, u32 mask)
{
tilcdc_write(dev, reg, tilcdc_read(dev, reg) | mask);
--
1.9.1
More information about the dri-devel
mailing list