[PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings

[Archit Taneja]

Add the regulator supply properties needed by ADV7511 and ADV7533.

The regulators are specified as optional properties since there can
be boards which have a fixed supply directly routed to the pins, and
these may not be modelled as regulator supplies.

Cc: devicetree at vger.kernel.org
Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Archit Taneja <architt at codeaurora.org>
---
v3:
- Revert back to having a common avdd-supply property for the 1.8V
  supplies

 Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 6532a59..13d53bc 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -56,6 +56,15 @@ Optional properties:
 - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
   generator. The chip will rely on the sync signals in the DSI data lanes,
   rather than generate its own timings for HDMI output.
+- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD
+  pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also powers
+  up the A2VDD pin.
+- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on
+  ADV7511 and V3P3 on ADV7533.
+
+ADV7533 specific supplies:
+- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
+  either 1.2V or 1.8V.
 
 Required nodes:
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation