[PATCH 32/36] drm/omap: displays: connector-hdmi: Support for hot plug detection
Tomi Valkeinen
tomi.valkeinen at ti.com
Wed Nov 30 11:17:34 UTC 2016
From: Peter Ujfalusi <peter.ujfalusi at ti.com>
If the hpd_gpio is valid, use interrupt handler to react to HPD changes.
In case the hpd_gpio is not valid, try to enable hpd detection on the
encoder if it supports it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
drivers/gpu/drm/omapdrm/displays/connector-hdmi.c | 63 +++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
index 1ef130641bae..4d743e011335 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/spinlock.h>
#include <drm/drm_edid.h>
#include <video/omap-panel-data.h>
@@ -38,6 +39,9 @@ static const struct videomode hdmic_default_vm = {
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
+ void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
+ void *hpd_cb_data;
+ struct mutex hpd_lock;
struct device *dev;
@@ -168,6 +172,32 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
return in->ops.hdmi->detect(in);
}
+static int hdmic_enable_hpd(struct omap_dss_device *dssdev,
+ void (*cb)(void *cb_data,
+ enum drm_connector_status status),
+ void *cb_data)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (gpio_is_valid(ddata->hpd_gpio)) {
+ mutex_lock(&ddata->hpd_lock);
+ ddata->hpd_cb = cb;
+ ddata->hpd_cb_data = cb_data;
+ mutex_unlock(&ddata->hpd_lock);
+ return 0;
+ } else if (in->ops.hdmi->enable_hpd) {
+ return in->ops.hdmi->enable_hpd(in, cb, cb_data);
+ }
+
+ return -ENOTSUPP;
+}
+
+static void hdmic_disable_hpd(struct omap_dss_device *dssdev)
+{
+ hdmic_enable_hpd(dssdev, NULL, NULL);
+}
+
static int hdmic_set_hdmi_mode(struct omap_dss_device *dssdev, bool hdmi_mode)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
@@ -200,10 +230,32 @@ static struct omap_dss_driver hdmic_driver = {
.read_edid = hdmic_read_edid,
.detect = hdmic_detect,
+ .enable_hpd = hdmic_enable_hpd,
+ .disable_hpd = hdmic_disable_hpd,
.set_hdmi_mode = hdmic_set_hdmi_mode,
.set_hdmi_infoframe = hdmic_set_infoframe,
};
+static irqreturn_t hdmic_hpd_isr(int irq, void *data)
+{
+ struct panel_drv_data *ddata = data;
+
+ mutex_lock(&ddata->hpd_lock);
+ if (ddata->hpd_cb) {
+ enum drm_connector_status status;
+
+ if (hdmic_detect(&ddata->dssdev))
+ status = connector_status_connected;
+ else
+ status = connector_status_disconnected;
+
+ ddata->hpd_cb(ddata->hpd_cb_data, status);
+ }
+ mutex_unlock(&ddata->hpd_lock);
+
+ return IRQ_HANDLED;
+}
+
static int hdmic_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
@@ -249,11 +301,22 @@ static int hdmic_probe(struct platform_device *pdev)
if (r)
return r;
+ mutex_init(&ddata->hpd_lock);
+
if (gpio_is_valid(ddata->hpd_gpio)) {
r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
GPIOF_DIR_IN, "hdmi_hpd");
if (r)
goto err_reg;
+
+ r = devm_request_threaded_irq(&pdev->dev,
+ gpio_to_irq(ddata->hpd_gpio),
+ NULL, hdmic_hpd_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "hdmic hpd", ddata);
+ if (r)
+ goto err_reg;
}
ddata->vm = hdmic_default_vm;
--
2.7.4
More information about the dri-devel
mailing list