[PATCH 1/3] drm/fsl-dcu: enable TCON bypass mode by default

Stefan Agner stefan at agner.ch
Wed Oct 5 00:58:03 UTC 2016


Do not use encoder disable/enable callbacks to control bypass
mode as this seems to mess with the signals not liked by
displays. This also makes more sense since the encoder is
already defined to be parallel RGB/LVDS at creation time.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
I tested that on Vybrid. Meng, since LS1021a does not use TCON this
should not affect LS1021a, so I think we are fine.

 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
index 26edcc8..e26c820 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c
@@ -28,28 +28,8 @@ fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
 	return 0;
 }
 
-static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
-
-	if (fsl_dev->tcon)
-		fsl_tcon_bypass_disable(fsl_dev->tcon);
-}
-
-static void fsl_dcu_drm_encoder_enable(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
-
-	if (fsl_dev->tcon)
-		fsl_tcon_bypass_enable(fsl_dev->tcon);
-}
-
 static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
 	.atomic_check = fsl_dcu_drm_encoder_atomic_check,
-	.disable = fsl_dcu_drm_encoder_disable,
-	.enable = fsl_dcu_drm_encoder_enable,
 };
 
 static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder)
@@ -68,6 +48,10 @@ int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
 	int ret;
 
 	encoder->possible_crtcs = 1;
+
+	/* Use bypass mode for parallel RGB/LVDS encoder */
+	fsl_tcon_bypass_enable(fsl_dev->tcon);
+
 	ret = drm_encoder_init(fsl_dev->drm, encoder, &encoder_funcs,
 			       DRM_MODE_ENCODER_LVDS, NULL);
 	if (ret < 0)
-- 
2.10.0



More information about the dri-devel mailing list