[PATCH v2 4/5] drm/fsl-dcu: enable pixel clock when enabling CRTC

Stefan Agner stefan at agner.ch
Wed Oct 5 21:47:02 UTC 2016


The pixel clock should not be on if the CRTC is not in use, hence
move clock enable/disable calls into CRTC callbacks.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c |  2 ++
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c  | 21 +--------------------
 2 files changed, 3 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index 5ad1d68..b2d5e18 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -51,6 +51,7 @@ static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
 			   DCU_MODE_DCU_MODE(DCU_MODE_OFF));
 	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
 		     DCU_UPDATE_MODE_READREG);
+	clk_disable_unprepare(fsl_dev->pix_clk);
 }
 
 static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
@@ -58,6 +59,7 @@ static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
 
+	clk_prepare_enable(fsl_dev->pix_clk);
 	regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
 			   DCU_MODE_DCU_MODE_MASK,
 			   DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 68db834..07969f5 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -267,12 +267,6 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
 		return ret;
 	}
 
-	ret = clk_prepare_enable(fsl_dev->pix_clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to enable pix clk\n");
-		goto disable_dcu_clk;
-	}
-
 	fsl_tcon_bypass_enable(fsl_dev->tcon);
 	fsl_dcu_drm_init_planes(fsl_dev->drm);
 	drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
@@ -285,10 +279,6 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
 	enable_irq(fsl_dev->irq);
 
 	return 0;
-
-disable_dcu_clk:
-	clk_disable_unprepare(fsl_dev->clk);
-	return ret;
 }
 #endif
 
@@ -402,18 +392,12 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
-	ret = clk_prepare_enable(fsl_dev->pix_clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to enable pix clk\n");
-		goto unregister_pix_clk;
-	}
-
 	fsl_dev->tcon = fsl_tcon_init(dev);
 
 	drm = drm_dev_alloc(driver, dev);
 	if (IS_ERR(drm)) {
 		ret = PTR_ERR(drm);
-		goto disable_pix_clk;
+		goto unregister_pix_clk;
 	}
 
 	fsl_dev->dev = dev;
@@ -434,8 +418,6 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 
 unref:
 	drm_dev_unref(drm);
-disable_pix_clk:
-	clk_disable_unprepare(fsl_dev->pix_clk);
 unregister_pix_clk:
 	clk_unregister(fsl_dev->pix_clk);
 disable_clk:
@@ -448,7 +430,6 @@ static int fsl_dcu_drm_remove(struct platform_device *pdev)
 	struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
 
 	clk_disable_unprepare(fsl_dev->clk);
-	clk_disable_unprepare(fsl_dev->pix_clk);
 	clk_unregister(fsl_dev->pix_clk);
 	drm_put_dev(fsl_dev->drm);
 
-- 
2.10.0



More information about the dri-devel mailing list