[Intel-gfx] [PATCH v2 05/10] drm/i915/gen9: Get rid of redundant watermark values

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Mon Oct 17 08:07:45 UTC 2016


Op 17-10-16 om 08:05 schreef Daniel Vetter:
> On Thu, Oct 13, 2016 at 05:04:03PM -0300, Paulo Zanoni wrote:
>> Em Qui, 2016-10-13 às 15:39 +0200, Maarten Lankhorst escreveu:
>>> Op 08-10-16 om 02:11 schreef Lyude:
>>>> Now that we've make skl_wm_levels make a little more sense, we can
>>>> remove all of the redundant wm information. Up until now we'd been
>>>> storing two copies of all of the skl watermarks: one being the
>>>> skl_pipe_wm structs, the other being the global wm struct in
>>>> drm_i915_private containing the raw register values. This is
>>>> confusing
>>>> and problematic, since it means we're prone to accidentally letting
>>>> the
>>>> two copies go out of sync. So, get rid of all of the functions
>>>> responsible for computing the register values and just use a single
>>>> helper, skl_write_wm_level(), to convert and write the new
>>>> watermarks on
>>>> the fly.
>>>>
>>>> Changes since v1:
>>>> - Fixup skl_write_wm_level()
>>>> - Fixup skl_wm_level_from_reg_val()
>>>> - Don't forget to copy *active to intel_crtc->wm.active.skl
>>>>
>>>> Signed-off-by: Lyude <cpaul at redhat.com>
>>>> Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>>>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>>> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
>>>> ---
>>>>  drivers/gpu/drm/i915/i915_drv.h      |   2 -
>>>>  drivers/gpu/drm/i915/intel_display.c |  14 ++-
>>>>  drivers/gpu/drm/i915/intel_drv.h     |   6 +-
>>>>  drivers/gpu/drm/i915/intel_pm.c      | 204 ++++++++++++-----------
>>>> ------------
>>>>  drivers/gpu/drm/i915/intel_sprite.c  |   8 +-
>>>>  5 files changed, 90 insertions(+), 144 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/i915_drv.h
>>>> b/drivers/gpu/drm/i915/i915_drv.h
>>>> index 0287c93..76583b2 100644
>>>> --- a/drivers/gpu/drm/i915/i915_drv.h
>>>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>>>> @@ -1644,8 +1644,6 @@ struct skl_ddb_allocation {
>>>>  struct skl_wm_values {
>>>>  	unsigned dirty_pipes;
>>>>  	struct skl_ddb_allocation ddb;
>>>> -	uint32_t plane[I915_MAX_PIPES][I915_MAX_PLANES][8];
>>>> -	uint32_t plane_trans[I915_MAX_PIPES][I915_MAX_PLANES];
>>>>  };
>>>>  
>>>>  struct skl_wm_level {
>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>>>> b/drivers/gpu/drm/i915/intel_display.c
>>>> index a71d05a..39400a0 100644
>>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>>> @@ -3378,6 +3378,8 @@ static void
>>>> skylake_update_primary_plane(struct drm_plane *plane,
>>>>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state-
>>>>> base.crtc);
>>>>  	struct drm_framebuffer *fb = plane_state->base.fb;
>>>>  	const struct skl_wm_values *wm = &dev_priv-
>>>>> wm.skl_results;
>>>> +	const struct skl_plane_wm *p_wm =
>>>> +		&crtc_state->wm.skl.optimal.planes[0];
>>>>  	int pipe = intel_crtc->pipe;
>>>>  	u32 plane_ctl;
>>>>  	unsigned int rotation = plane_state->base.rotation;
>>>> @@ -3414,7 +3416,7 @@ static void
>>>> skylake_update_primary_plane(struct drm_plane *plane,
>>>>  	intel_crtc->adjusted_y = src_y;
>>>>  
>>>>  	if (wm->dirty_pipes & drm_crtc_mask(&intel_crtc->base))
>>>> -		skl_write_plane_wm(intel_crtc, wm, 0);
>>>> +		skl_write_plane_wm(intel_crtc, p_wm, &wm->ddb, 0);
>>>>  
>>>>  	I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
>>>>  	I915_WRITE(PLANE_OFFSET(pipe, 0), (src_y << 16) | src_x);
>>>> @@ -3448,6 +3450,8 @@ static void
>>>> skylake_disable_primary_plane(struct drm_plane *primary,
>>>>  	struct drm_device *dev = crtc->dev;
>>>>  	struct drm_i915_private *dev_priv = to_i915(dev);
>>>>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>>>> +	struct intel_crtc_state *cstate =
>>>> to_intel_crtc_state(crtc->state);
>>>> +	const struct skl_plane_wm *p_wm = &cstate-
>>>>> wm.skl.optimal.planes[0];
>>>>  	int pipe = intel_crtc->pipe;
>>>>  
>>>>  	/*
>>>> @@ -3455,7 +3459,8 @@ static void
>>>> skylake_disable_primary_plane(struct drm_plane *primary,
>>>>  	 * plane's visiblity isn't actually changing neither is
>>>> its watermarks.
>>>>  	 */
>>>>  	if (!crtc->primary->state->visible)
>>>> -		skl_write_plane_wm(intel_crtc, &dev_priv-
>>>>> wm.skl_results, 0);
>>>> +		skl_write_plane_wm(intel_crtc, p_wm,
>>>> +				   &dev_priv->wm.skl_results.ddb,
>>>> 0);
>>>>  
>>>>  	I915_WRITE(PLANE_CTL(pipe, 0), 0);
>>>>  	I915_WRITE(PLANE_SURF(pipe, 0), 0);
>>>> @@ -10819,12 +10824,15 @@ static void i9xx_update_cursor(struct
>>>> drm_crtc *crtc, u32 base,
>>>>  	struct drm_device *dev = crtc->dev;
>>>>  	struct drm_i915_private *dev_priv = to_i915(dev);
>>>>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>>>> +	struct intel_crtc_state *cstate =
>>>> to_intel_crtc_state(crtc->state);
>>>>  	const struct skl_wm_values *wm = &dev_priv-
>>>>> wm.skl_results;
>>>> +	const struct skl_plane_wm *p_wm =
>>>> +		&cstate->wm.skl.optimal.planes[PLANE_CURSOR];
>>>>  	int pipe = intel_crtc->pipe;
>>>>  	uint32_t cntl = 0;
>>>>  
>>>>  	if (INTEL_GEN(dev_priv) >= 9 && wm->dirty_pipes &
>>>> drm_crtc_mask(crtc))
>>>> -		skl_write_cursor_wm(intel_crtc, wm);
>>>> +		skl_write_cursor_wm(intel_crtc, p_wm, &wm->ddb);
>>>>  
>>>>  	if (plane_state && plane_state->base.visible) {
>>>>  		cntl = MCURSOR_GAMMA_ENABLE;
>>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h
>>>> b/drivers/gpu/drm/i915/intel_drv.h
>>>> index d684f4f..958dc72 100644
>>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>>> @@ -1765,9 +1765,11 @@ bool skl_ddb_allocation_equals(const struct
>>>> skl_ddb_allocation *old,
>>>>  bool skl_ddb_allocation_overlaps(struct drm_atomic_state *state,
>>>>  				 struct intel_crtc *intel_crtc);
>>>>  void skl_write_cursor_wm(struct intel_crtc *intel_crtc,
>>>> -			 const struct skl_wm_values *wm);
>>>> +			 const struct skl_plane_wm *wm,
>>>> +			 const struct skl_ddb_allocation *ddb);
>>>>  void skl_write_plane_wm(struct intel_crtc *intel_crtc,
>>>> -			const struct skl_wm_values *wm,
>>>> +			const struct skl_plane_wm *wm,
>>>> +			const struct skl_ddb_allocation *ddb,
>>>>  			int plane);
>>>>  uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state
>>>> *pipe_config);
>>>>  bool ilk_disable_lp_wm(struct drm_device *dev);
>>>> diff --git a/drivers/gpu/drm/i915/intel_pm.c
>>>> b/drivers/gpu/drm/i915/intel_pm.c
>>>> index 5dbaf12..5cb537c 100644
>>>> --- a/drivers/gpu/drm/i915/intel_pm.c
>>>> +++ b/drivers/gpu/drm/i915/intel_pm.c
>>>> @@ -3000,6 +3000,8 @@ bool intel_can_enable_sagv(struct
>>>> drm_atomic_state *state)
>>>>  	struct drm_i915_private *dev_priv = to_i915(dev);
>>>>  	struct intel_atomic_state *intel_state =
>>>> to_intel_atomic_state(state);
>>>>  	struct drm_crtc *crtc;
>>>> +	struct intel_crtc_state *cstate;
>>>> +	struct skl_plane_wm *wm;
>>>>  	enum pipe pipe;
>>>>  	int level, plane;
>>>>  
>>>> @@ -3020,18 +3022,21 @@ bool intel_can_enable_sagv(struct
>>>> drm_atomic_state *state)
>>>>  	/* Since we're now guaranteed to only have one active
>>>> CRTC... */
>>>>  	pipe = ffs(intel_state->active_crtcs) - 1;
>>>>  	crtc = dev_priv->pipe_to_crtc_mapping[pipe];
>>>> +	cstate = intel_atomic_get_crtc_state(state,
>>>> to_intel_crtc(crtc));
>>> Wrong cstate here, should be crtc->state since it's committed and
>>> crtc_state is the old state.
>> Ah... How many instances of the "you're looking at the wrong state
>> struct" have we spotted/fixed ever since the introduction of the atomic
>> code? Can't we try to do something more human-proof in order to avoid
>> these problems from happening again and again?
>>
>> Like for example copying the old states to a specific structure like
>> drm_atomic_state->old_states_which_you_probably_shouldn_be_using, and
>> then setting the CRTC/connector/plane states in the drm_atomic_state
>> struct to NULL so bugs will be much easier to spot?
> Maarten has patches somewhere to create explicit old/new state pointers in
> drm_atomic_state. Not sure where exactly they're stuck.
> -Daniel

Waiting for drm-misc merge window to reopen, but making things more explicit will help a lot.

~Maarten



More information about the dri-devel mailing list