[PATCH 2/3] dt-bindings: it6251: add bindings for IT6251 LVDS-to-eDP bridge

[Rob Herring]

On Mon, Oct 17, 2016 at 06:33:28PM +0200, Marek Vasut wrote:
> Add DT bindings for ITE IT6251 LVDS-to-eDP bridge.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: devicetree at vger.kernel.org
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Sean Cross <xobs at kosagi.com>
> ---
>  .../bindings/display/bridge/ite,it6251.txt         | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6251.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6251.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6251.txt
> new file mode 100644
> index 0000000..c5db82c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6251.txt
> @@ -0,0 +1,35 @@
> +ITE IT6251 LVDS-to-eDP bridge bindings
> +
> +Required properties:
> +- compatible:		Should be "ite,it6251"
> +- reg:			i2c address of the bridge, i2c address of the LVDS part
> +- reg-names:		Should be "bridge", "lvds"
> +- power-supply:		Regulator to provide the supply voltage

The input pin is called "power"?

> +- video interfaces:	Device node can contain video interface port nodes
> +			for panel according to [1].
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> +	it6251 at 5c {
> +		compatible = "ite,it6251";
> +		reg = <0x5c>, <0x5e>;
> +		reg-names = "bridge", "lvds";
> +		power-supply = <&reg_display>;
> +
> +		ports {
> +			port at 0 {
> +				bridge_out_edp0: endpoint {
> +					remote-endpoint = <&panel_in_edp0>;
> +				};
> +			};
> +
> +			port at 1 {
> +				bridge_in_lvds0: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +		};
> +	};
> +
> -- 
> 2.9.3
>