[PATCH 8/9] drm/imx: ipuv3-plane: add support for YUV 4:2:2 and 4:4:4, NV12, and NV16 formats
Ying Liu
gnuiyl at gmail.com
Wed Oct 19 07:49:23 UTC 2016
On Wed, Oct 19, 2016 at 12:07 AM, Philipp Zabel <p.zabel at pengutronix.de> wrote:
> Hook up support for DRM_FORMAT_YUV422, DRM_FORMAT_YVU422,
> DRM_FORMAT_YUV444, DRM_FORMAT_YVU444, DRM_FORMAT_NV12,
> and DRM_FORMAT_NV16.
>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> ---
> drivers/gpu/drm/imx/ipuv3-plane.c | 52 +++++++++++++++++++++++++++++++++------
> 1 file changed, 44 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
> index 88829b9..991b3f1 100644
> --- a/drivers/gpu/drm/imx/ipuv3-plane.c
> +++ b/drivers/gpu/drm/imx/ipuv3-plane.c
> @@ -50,6 +50,12 @@ static const uint32_t ipu_plane_formats[] = {
> DRM_FORMAT_YVYU,
> DRM_FORMAT_YUV420,
> DRM_FORMAT_YVU420,
> + DRM_FORMAT_YUV422,
> + DRM_FORMAT_YVU422,
> + DRM_FORMAT_YUV444,
> + DRM_FORMAT_YVU444,
> + DRM_FORMAT_NV12,
> + DRM_FORMAT_NV16,
> DRM_FORMAT_RGB565,
> };
>
> @@ -292,6 +298,10 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
> switch (fb->pixel_format) {
> case DRM_FORMAT_YUV420:
> case DRM_FORMAT_YVU420:
> + case DRM_FORMAT_YUV422:
> + case DRM_FORMAT_YVU422:
> + case DRM_FORMAT_YUV444:
> + case DRM_FORMAT_YVU444:
> /*
> * Multiplanar formats have to meet the following restrictions:
> * - The (up to) three plane addresses are EBA, EBA+UBO, EBA+VBO
> @@ -300,25 +310,34 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
> * - Only EBA may be changed while scanout is active
> * - The strides of U and V planes must be identical.
> */
> - ubo = drm_plane_state_to_ubo(state);
> vbo = drm_plane_state_to_vbo(state);
>
> - if ((ubo & 0x7) || (vbo & 0x7))
> - return -EINVAL;
> -
> - if ((ubo > 0xfffff8) || (vbo > 0xfffff8))
> + if (vbo & 0x7 || vbo > 0xfffff8)
> return -EINVAL;
>
> if (old_fb && (fb->pixel_format == old_fb->pixel_format)) {
> - old_ubo = drm_plane_state_to_ubo(old_state);
> old_vbo = drm_plane_state_to_vbo(old_state);
> - if (ubo != old_ubo || vbo != old_vbo)
> + if (vbo != old_vbo)
> crtc_state->mode_changed = true;
> }
>
> if (fb->pitches[1] != fb->pitches[2])
> return -EINVAL;
>
> + /* fall-through */
> + case DRM_FORMAT_NV12:
> + case DRM_FORMAT_NV16:
> + ubo = drm_plane_state_to_ubo(state);
> +
> + if (ubo & 0x7 || ubo > 0xfffff8)
> + return -EINVAL;
> +
> + if (old_fb && (fb->pixel_format == old_fb->pixel_format)) {
> + old_ubo = drm_plane_state_to_ubo(old_state);
> + if (ubo != old_ubo)
> + crtc_state->mode_changed = true;
> + }
> +
> if (fb->pitches[1] < 1 || fb->pitches[1] > 16384)
> return -EINVAL;
>
> @@ -406,10 +425,16 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
> switch (fb->pixel_format) {
> case DRM_FORMAT_YUV420:
> case DRM_FORMAT_YVU420:
> + case DRM_FORMAT_YUV422:
> + case DRM_FORMAT_YVU422:
> + case DRM_FORMAT_YUV444:
> + case DRM_FORMAT_YVU444:
> ubo = drm_plane_state_to_ubo(state);
> vbo = drm_plane_state_to_vbo(state);
>
> - if (fb->pixel_format == DRM_FORMAT_YUV420)
> + if (fb->pixel_format != DRM_FORMAT_YVU420 &&
> + fb->pixel_format != DRM_FORMAT_YVU422 &&
> + fb->pixel_format != DRM_FORMAT_YVU444)
Nit:
This looks more straightforward, perhaps.
+ if (fb->pixel_format == DRM_FORMAT_YUV420 ||
+ fb->pixel_format == DRM_FORMAT_YUV422 ||
+ fb->pixel_format == DRM_FORMAT_YUV444)
Regards,
Liu Ying
> ipu_cpmem_set_yuv_planar_full(ipu_plane->ipu_ch,
> fb->pitches[1], ubo, vbo);
> else
> @@ -420,6 +445,17 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
> "phy = %lu %lu %lu, x = %d, y = %d", eba, ubo, vbo,
> state->src_x >> 16, state->src_y >> 16);
> break;
> + case DRM_FORMAT_NV12:
> + case DRM_FORMAT_NV16:
> + ubo = drm_plane_state_to_ubo(state);
> +
> + ipu_cpmem_set_yuv_planar_full(ipu_plane->ipu_ch,
> + fb->pitches[1], ubo, ubo);
> +
> + dev_dbg(ipu_plane->base.dev->dev,
> + "phy = %lu %lu, x = %d, y = %d", eba, ubo,
> + state->src_x >> 16, state->src_y >> 16);
> + break;
> default:
> dev_dbg(ipu_plane->base.dev->dev, "phys = %lu, x = %d, y = %d",
> eba, state->src_x >> 16, state->src_y >> 16);
> --
> 2.9.3
>
More information about the dri-devel
mailing list