[PATCH v2 3/4] drm/dp/mst: Clear port->pdt when tearing down the i2c adapter

[Daniel Vetter]

On Wed, Oct 26, 2016 at 04:35:50PM +0300, Ville Syrjälä wrote:
> On Wed, Oct 26, 2016 at 04:30:33PM +0300, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > 
> > The i2c adapter is only relevant for some peer device types, so
> > let's clear the pdt if it's still the same as the old_pdt when we
> > tear down the i2c adapter.
> > 
> > I don't really like this design pattern of updating port->whatever
> > before doing the accompanying changes and passing around old_whatever
> > to figure stuff out. Would make much more sense to me to the pass the
> > new value around and only update the port->whatever when things are
> > consistent. But let's try to work with what we have right now.
> > 
> > v2: Clear port->pdt in the caller, if needed (Daniel)
> > 
> > Cc: Daniel Vetter <daniel at ffwll.ch>
> > Cc: stable at vger.kernel.org
> > Cc: Carlos Santa <carlos.santa at intel.com>
> > Cc: Kirill A. Shutemov <kirill at shutemov.name>
> > Tested-by: Carlos Santa <carlos.santa at intel.com> (v1)
> > Tested-by: Kirill A. Shutemov <kirill at shutemov.name> (v1)
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> >  drivers/gpu/drm/drm_dp_mst_topology.c | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> > index 04e457117980..ba13f9d8720b 100644
> > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > @@ -914,6 +914,7 @@ static void drm_dp_destroy_port(struct kref *kref)
> >  		/* no need to clean up vcpi
> >  		 * as if we have no connector we never setup a vcpi */
> >  		drm_dp_port_teardown_pdt(port, port->pdt);
> > +		port->pdt = DP_PEER_DEVICE_NONE;
> 
> And naturally I forgot to amend the commit message w.r.t. this guy.
> We don't really need to do this here, but I figured I'd try to be a
> bit more consistent by having it, just to avoid accidental mistakes
> if/when someone changes this stuff again later.

With the commit message amended like you say here:

Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>

> 
> >  	}
> >  	kfree(port);
> >  }
> > @@ -2919,6 +2920,7 @@ static void drm_dp_destroy_connector_work(struct work_struct *work)
> >  		mgr->cbs->destroy_connector(mgr, port->connector);
> >  
> >  		drm_dp_port_teardown_pdt(port, port->pdt);
> > +		port->pdt = DP_PEER_DEVICE_NONE;
> >  
> >  		if (!port->input && port->vcpi.vcpi > 0) {
> >  			drm_dp_mst_reset_vcpi_slots(mgr, port);
> > -- 
> > 2.7.4
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch