[PATCH 2/3] drm/bridge: adv7533: Initialize regulators

[Archit Taneja]

On 09/01/2016 02:00 AM, Laurent Pinchart wrote:
> Hi Archit,
>
> On Wednesday 31 Aug 2016 22:24:30 Archit Taneja wrote:
>> On 8/31/2016 9:23 PM, Laurent Pinchart wrote:
>>> On Wednesday 31 Aug 2016 16:22:09 Archit Taneja wrote:
>>>> ADV7533 requires supply to the AVDD, V1P2 and V3P3 pins for proper
>>>> functionality.
>>>>
>>>> Initialize and enable the regulators during probe itself. Controlling
>>>> these dynamically is left for later.
>>>
>>> You should document the power supplies in the DT bindings.
>>
>> The DT bindings doc update was a part of the same series. I accidentally
>> Cc'd you only for this patch.
>
> No worries. What's the patch's subject ?

It is: dt-bindings: drm/bridge: adv7511: Add regulators for ADV7533

https://patchwork.kernel.org/patch/9306945/

Thanks,
Archit

>
>>>> Cc: dri-devel at lists.freedesktop.org
>>>> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>>>> Signed-off-by: Archit Taneja <architt at codeaurora.org>
>>>> ---
>>>>
>>>>    drivers/gpu/drm/bridge/adv7511/adv7511.h     | 16 ++++++++++
>>>>    drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 34 +++++++++++++++------
>>>>    drivers/gpu/drm/bridge/adv7511/adv7533.c     | 45 +++++++++++++++++++++
>>>>    3 files changed, 86 insertions(+), 9 deletions(-)
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project