[linux-sunxi] [PATCH 3/7] drm/sun4i: Add SAT and DRC drivers

[Peter Korsgaard]

>>>>> "Maxime" == Maxime Ripard <maxime.ripard at free-electrons.com> writes:

Hi,

 > The A33 pipeline also has some new components called SAT and DRC. Even
 > though their exact features and programming model is not known (or
 > documented), they need to be clocked for the pipeline to carry the video
 > signal all the way.

 > Add minimal drivers for those that just claim the needed resources for the
 > pipeline to operate properly.

 > Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
 > ---
 >  .../bindings/display/sunxi/sun4i-drm.txt           |  37 +++++++
 >  drivers/gpu/drm/sun4i/Makefile                     |   3 +-
 >  drivers/gpu/drm/sun4i/sun6i_drc.c                  | 117 +++++++++++++++++++++
 >  drivers/gpu/drm/sun4i/sun8i_sat.c                  | 105 ++++++++++++++++++
 >  4 files changed, 261 insertions(+), 1 deletion(-)
 >  create mode 100644 drivers/gpu/drm/sun4i/sun6i_drc.c
 >  create mode 100644 drivers/gpu/drm/sun4i/sun8i_sat.c

 > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
 > index d467ea93ac08..87c3c8dd34cb 100644
 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
 > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
 > @@ -51,6 +51,43 @@ Required properties:
 >    second the block connected to the TCON channel 1 (usually the TV
 >    encoder)
 
 > +SAT
 > +---
 > +
 > +The SAT, found in the A33, allows to do some color correction.
 > +
 > +Required properties:
 > +  - compatible: value must be one of:
 > +    * allwinner,sun8i-a33-sat
 > +  - reg: base address and size of the memory-mapped region.
 > +  - clock: phandles to bus clock feeding the SAT
 > +  - resets: phandles to the reset line driving the SAT
 > +
 > +- ports: A ports node with endpoint definitions as defined in
 > +  Documentation/devicetree/bindings/media/video-interfaces.txt. The
 > +  first port should be the input endpoints, the second one the outputs
 > +
 > +DRC
 > +---
 > +
 > +The DRC, found in the latest Allwinner SoCs (A31, A23, A33), allows to
 > +do some backlight control to enhance the power consumption.

'Enhance the power consumption'? That doesn't sound like something you
would want ;) Presumably it is something to allow you to save power by
dynamically adjusting LCD backlight and pixel brightness/contrast
depending on screen content? I believe this is typically called content
adaptive backlight control:

https://www.ecnmag.com/article/2010/04/content-adaptive-lcd-backlight-control

You spell out what DRC and SAT stands for in the driver source code,
perhaps it also makes sense to do it here?

Perhaps rewording it to something like this is clearer:

.. allows to dynamically adjust pixel brightness/contrast based on
histogram measurements for LCD content adaptive backlight control.

-- 
Bye, Peter Korsgaard