[PATCH 0/4] drm/fsl-dcu: add overlay and cursor plane support

[Meng Yi]

Hi Stefan,

I had tested the patches on LS1021A-TWR board using drmlib.

Like set three overlays:
root at ls1021atwr:~# ./modetest -P 39:900x100+10+10 at RG24 -P 39:200x200+300+0 at RG24 -P 39:200x200+400+300 at RG24

How did you test the overlays and cursor layer, I mean I see you using x-window like thing in the  video.

Best Regards,
Meng

> This patchset adds overlay and cursor plane support. It also fixes some issues
> uncovered during implementation of this.
> 
> However, the plane updates currently causes the display to flicker for unknown
> reasons. As far as I can tell, the CRTC atomic_flush should trigger the update
> correctly via READREG, which according to
> documentation:
> The READREG bit causes a single transfer to begin at the next frame blanking
> period. This bit is cleared when the transfer is complete.
> 
> I made a video how that looks:
> https://cloud.agner.ch/index.php/s/Yfqa2u7UBEWUT8N
> 
> Any ideas?
> 
> Stefan Agner (4):
>   drm/fsl-dcu: support overlay and cursor planes
>   drm/fsl-dcu: respect pos/size register sizes
>   drm/fsl-dcu: update all registers on flush
>   drm/fsl-dcu: do not update when modifying irq registers
> 
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c  | 50
> ++++++++++++++++++++++++-----
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c   |  4 ---
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h   |  8 ++---
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 42 +++++++++++-------------
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h |  3 +-
>  5 files changed, 67 insertions(+), 40 deletions(-)
> 
> --
> 2.9.3