[PATCH 6/4] arm: dts: qcom: apq8064-nexus7: Add DSI and panel nodes

[John Stultz]

Tagging on to Archit's patchset here.

Add DSI and panel nodes to get graphics up and running
on the Nexus7.

This still depends on the panel driver being present
(currently under review) along with the rpmclk code.

Feedback would be appreciated here!

Cc: Archit Taneja <architt at codeaurora.org>
Cc: vinay simha <vinaysimha at inforcecomputing.com>
Cc: andy.gross at linaro.org
Cc: robdclark at gmail.com
Cc: linux-arm-msm at vger.kernel.org
Cc: dri-devel at lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz at linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 78 +++++++++++++++++++++-
 1 file changed, 76 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index ff856c3..e25a764 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -27,6 +27,18 @@
 		regulator-boot-on;
 	};
 
+	vcc_1p8v: regulator-fixed at 2 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1p8v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		volume_up {
@@ -99,6 +111,7 @@
 				l2 {
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
 				};
 
 				/* msm_otg-HSUSB_3p3 */
@@ -133,13 +146,14 @@
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
+					regulator-always-on;
 				};
 
 				/* pwm_power for backlight */
 				l17 {
 					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
 				};
 
 				/* camera, qdsp6 */
@@ -184,6 +198,66 @@
 			};
 		};
 
+		mdp at 5100000 {
+			status = "okay";
+			ports {
+				port at 1 {
+					mdp_dsi1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+			};
+		};
+
+		dsi0: qcom,mdss_dsi at 4700000 {
+			status = "okay";
+			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+			vdd-supply = <&pm8921_l8>;
+			vddio-supply = <&pm8921_lvs7>;
+			avdd-supply = <&pm8921_l11>;
+			vcss-supply = <&ext_3p3v>;
+
+			panel at 0 {
+				reg = <0>;
+				compatible = "jdi,lt070me05000";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&dsi_panel_pinctrl>;
+
+				vddp-supply = <&pm8921_l17>;
+				dcdc_en-supply = <&pm8921_lvs7>;
+				vcc-supply = <&vcc_1p8v>;
+
+				reset-gpios = <&tlmm_pinmux 54 0>;
+				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+			};
+			ports {
+				port at 0 {
+					dsi0_in: endpoint {
+						remote-endpoint = <&mdp_dsi1_out>;
+					};
+				};
+
+				port at 1 {
+					dsi0_out: endpoint {
+						remote-endpoint = <&panel_in>;
+						data-lanes = <0 1 2 3>;
+					};
+				};
+			};
+		};
+
+		mdp_dsi_phy0: qcom,mdss_dsi_phy at 4700200 {
+			status = "okay";
+			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+		};
+
 		gsbi at 16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
-- 
1.9.1