[PATCH v4.1 07/14] drm: tilcdc: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Sep 15 21:40:27 UTC 2016
The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.
In the tilcdc_crtc_mode_set() function compute the hardware register
value directly from the pixel format instead of computing the number of
bits per pixels first.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
Changes since v4:
- Added support for DRM_FORMAT_BGR565, DRM_FORMAT_XBGR8888 and
DRM_FORMAT_BGR888
Changes since v3:
- Removed DRM_FORMAT_ARGB8888 support
- Fixed coding style
- Renamed min_pitch to pitch
Cc: Jyri Sarha <jsarha at ti.com>
---
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 18 ++++++++----------
drivers/gpu/drm/tilcdc/tilcdc_plane.c | 7 ++++---
2 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 208768922030..0800545b5c5a 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -67,16 +67,14 @@ static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_gem_cma_object *gem;
- unsigned int depth, bpp;
dma_addr_t start, end;
u64 dma_base_and_ceiling;
- drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
gem = drm_fb_cma_get_gem_obj(fb, 0);
start = gem->paddr + fb->offsets[0] +
crtc->y * fb->pitches[0] +
- crtc->x * bpp / 8;
+ crtc->x * drm_format_plane_cpp(fb->pixel_format, 0);
end = start + (crtc->mode.vdisplay * fb->pitches[0]);
@@ -412,16 +410,16 @@ static void tilcdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
if (info->tft_alt_mode)
reg |= LCDC_TFT_ALT_ENABLE;
if (priv->rev == 2) {
- unsigned int depth, bpp;
-
- drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
- switch (bpp) {
- case 16:
+ switch (fb->pixel_format) {
+ case DRM_FORMAT_BGR565:
+ case DRM_FORMAT_RGB565:
break;
- case 32:
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_XRGB8888:
reg |= LCDC_V2_TFT_24BPP_UNPACK;
/* fallthrough */
- case 24:
+ case DRM_FORMAT_BGR888:
+ case DRM_FORMAT_RGB888:
reg |= LCDC_V2_TFT_24BPP_MODE;
break;
default:
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_plane.c b/drivers/gpu/drm/tilcdc/tilcdc_plane.c
index 74c65fa859b2..8a6a50d74aff 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_plane.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_plane.c
@@ -39,7 +39,7 @@ static int tilcdc_plane_atomic_check(struct drm_plane *plane,
{
struct drm_crtc_state *crtc_state;
struct drm_plane_state *old_state = plane->state;
- unsigned int depth, bpp;
+ unsigned int pitch;
if (!state->crtc)
return 0;
@@ -68,8 +68,9 @@ static int tilcdc_plane_atomic_check(struct drm_plane *plane,
return -EINVAL;
}
- drm_fb_get_bpp_depth(state->fb->pixel_format, &depth, &bpp);
- if (state->fb->pitches[0] != crtc_state->mode.hdisplay * bpp / 8) {
+ pitch = crtc_state->mode.hdisplay *
+ drm_format_plane_cpp(state->fb->pixel_format, 0);
+ if (state->fb->pitches[0] != pitch) {
dev_err(plane->dev->dev,
"Invalid pitch: fb and crtc widths must be the same");
return -EINVAL;
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list