[PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings

[Vinay Simha]

Hi Tierry,

Could you please review the patch and integrate?

On Thu, Sep 8, 2016 at 10:44 AM, Vinay Simha BN <simhavcs at gmail.com> wrote:

> Add documentation for lt070me05000 panel
>
> Cc: Archit Taneja <archit.taneja at gmail.com>
> Cc: John Stultz <john.stultz at linaro.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: Sumit Semwal <sumit.semwal at linaro.org>
> Signed-off-by: Vinay Simha BN <simhavcs at gmail.com>
> Acked-by: Rob Herring <robh at kernel.org>
>
> ---
> v2:
>  * incorporated rob herring and thierry reviews
>    gpio to gpios, gpio to regulator using fixed regulators
>    and pwm backlight is removed, since it is controlled by
>    dcs commands
>
> v3:
>  * incorporated thierry reviews
>    - Added gpio polarity details for reset-gpios
>    - proper naming conventions and sequence wrt panel datasheet
>      (vddp-supply, iovcc-supply,
>       enable-gpios, reset-gpios, dcdc-en-gpios)
> v4:
>  * pinctrl-names, pinctrl-0 removed, not required for
>    reset-gpios
> ---
>  .../bindings/display/panel/jdi,lt070me05000.txt    | 31
> ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,
> lt070me05000.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> new file mode 100644
> index 0000000..4989c91d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> @@ -0,0 +1,31 @@
> +JDI model LT070ME05000 1200x1920 7" DSI Panel
> +
> +Required properties:
> +- compatible: should be "jdi,lt070me05000"
> +- vddp-supply: phandle of the regulator that provides the supply voltage
> +  Power IC supply (3-5V)
> +- iovcc-supply: phandle of the regulator that provides the supply voltage
> +  IOVCC , power supply for LCM (1.8V)
> +- enable-gpios: phandle of gpio for enable line
> +  LED_EN, LED backlight enable, High active
> +- reset-gpios: phandle of gpio for reset line
> +  This should be 8mA, gpio can be configured using mux, pinctrl,
> pinctrl-names
> +  XRES, Reset, Low active
> +- dcdc-en-gpios: phandle of the gpio for power ic line
> +  Power IC supply enable, High active
> +
> +Example:
> +
> +       dsi0: qcom,mdss_dsi at 4700000 {
> +               panel at 0 {
> +                       compatible = "jdi,lt070me05000";
> +                       reg = <0>;
> +
> +                       vddp-supply = <&pm8921_l17>;
> +                       iovcc-supply = <&pm8921_lvs7>;
> +
> +                       enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> +                       reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> +                       dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> +               };
> +       };
> --
> 2.1.2
>
>


-- 
regards,
vinaysimha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20160915/0e99f30a/attachment-0001.html>