4.8-rc1: it is now common that machine needs re-run of xrandr after resume

[Martin Steigerwald]

Am Mittwoch, 14. September 2016, 14:14:35 CEST schrieb Jani Nikula:
> On Wed, 14 Sep 2016, Jani Nikula <jani.nikula at linux.intel.com> wrote:
> > On Wed, 14 Sep 2016, Pavel Machek <pavel at ucw.cz> wrote:
> >> For the "sometimes need xrandr after resume": I don't think I can
> >> bisect that. It only happens sometimes :-(. But there's something
> >> helpful in the logs:
> >> 
> >> [ 1856.218863] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
> >> invalid, remainder is 130
> >> [ 1856.218863] Raw EDID:
> >> [ 1856.218863]     00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
> >> invalid, remainder is 130
> >> [ 1856.218863] Raw EDID:
> >> [ 1856.218863]     00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
> >> invalid, remainder is 130
> >> [ 1856.218863] Raw EDID:
> >> [ 1856.218863]     00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
> >> invalid, remainder is 130
> >> [ 1856.218863] Raw EDID:
> >> [ 1856.218863]     00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863]     ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >> [ 1856.218863] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid.
> > 
> > Pavel, Martin, do you always see this when the display fails to resume?
> > Is it HDMI/DVI for both of you?
> 
> Please try this patch, backported from our next.

Was busy up to now, and weekend also quite full already.

Thing is: I didn´t see this blank screen thing with 4.8-rc6 so far. And I did 
not have above EDID stuff in my log either. So I first wait whether I see 
blank screen again and if so, then know that a test would make sense. Maybe I 
see it before I complete a rc7 or rc8 (if there will be one), then I would 
include the patch of course.

-- 
Martin