[PATCH 1/2 v3] drm/bridge: adv7511: Add Audio support.

[John Stultz]

On Fri, Sep 16, 2016 at 3:51 AM, Lars-Peter Clausen <lars at metafoo.de> wrote:
> On 09/07/2016 01:22 AM, John Stultz wrote:
>> This patch adds support to Audio for both adv7511 and adv7533
>> bridge chips.
>>
>> This patch was originally from [1] by Lars-Peter Clausen <lars at metafoo.de>
>> and was adapted by Archit Taneja <architt at codeaurora.org> and
>> Srinivas Kandagatla <srinivas.kandagatla at linaro.org>.
>>
>> Then I heavily reworked it to use the hdmi-codec driver. And also
>> folded in some audio packet initialization done by Andy Green
>> <andy.green at linaro.org>. So credit to them, but blame to me.
>>
>> [1] https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/gpu/drm/i2c/adv7511_audio.c
>>
>> Cc: David Airlie <airlied at linux.ie>
>> Cc: Archit Taneja <architt at codeaurora.org>
>> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> Cc: Wolfram Sang <wsa+renesas at sang-engineering.com>
>> Cc: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> Cc: "Ville Syrjälä" <ville.syrjala at linux.intel.com>
>> Cc: Boris Brezillon <boris.brezillon at free-electrons.com>
>> Cc: Andy Green <andy at warmcat.com>
>> Cc: Dave Long <dave.long at linaro.org>
>> Cc: Guodong Xu <guodong.xu at linaro.org>
>> Cc: Zhangfei Gao <zhangfei.gao at linaro.org>
>> Cc: Mark Brown <broonie at kernel.org>
>> Cc: Lars-Peter Clausen <lars at metafoo.de>
>> Cc: Jose Abreu <joabreu at synopsys.com>
>> Cc: dri-devel at lists.freedesktop.org
>> Signed-off-by: John Stultz <john.stultz at linaro.org>
>
> I'm not to fond of the hdmi-codec stuff, but within its context this looks
> ok. Thanks for getting this upstream ready. Just one tiny bit regarding the
> Kconfig entry.
>
> If that is fixed feel free to add on the next revision:
>
> Acked-by: Lars-Peter Clausen <lars at metafoo.de>
>
>> ---
>> v3:
>> * Allowed audio support to be configured in or out, as suggested by Laurent
>> * Minor cleanups suggested by Laurent
>> * Folded in Andy's audio packet initialization patch, as suggested by Archit
>>
>>  drivers/gpu/drm/bridge/adv7511/Kconfig         |   9 ++
>>  drivers/gpu/drm/bridge/adv7511/Makefile        |   1 +
>>  drivers/gpu/drm/bridge/adv7511/adv7511.h       |  16 ++
>>  drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 213 +++++++++++++++++++++++++
>>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c   |   4 +
>>  5 files changed, 243 insertions(+)
>>  create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
>>
>> diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
>> index d2b0499..b303ad1 100644
>> --- a/drivers/gpu/drm/bridge/adv7511/Kconfig
>> +++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
>> @@ -3,9 +3,18 @@ config DRM_I2C_ADV7511
>>       depends on OF
>>       select DRM_KMS_HELPER
>>       select REGMAP_I2C
>> +     select SND_SOC_HDMI_CODEC if SND_SOC
>
> This seems to be redundant considering the select done by DRM_I2C_ADV7511_AUDIO.
>
>>       help
>>         Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
>>
>> +config DRM_I2C_ADV7511_AUDIO
>> +     tristate "ADV7511 HDMI Audio driver"
>
> This should be bool. It either gets built into the ADV7511 driver (which
> itself could either be a module or built-in) or not. But setting this option
> itself to module wont work.

Ah! Thanks for the catch here!

I really appreciate the feedback! I'll integrate those changes and
respin the patch here shortly!

thanks
-john