[PATCH] drm/sti: remove stih415-416 platform support

Vincent Abriou vincent.abriou at st.com
Tue Sep 20 07:59:42 UTC 2016


stih415 and stih416 platform are obsolete and no more supported.
Only stih407 and stih410 platform are maintained.

Signed-off-by: Vincent Abriou <vincent.abriou at st.com>
---
 drivers/gpu/drm/sti/Kconfig                |   6 +-
 drivers/gpu/drm/sti/sti_compositor.c       |  19 --
 drivers/gpu/drm/sti/sti_hda.c              |  39 +---
 drivers/gpu/drm/sti/sti_hdmi.c             |  20 --
 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 -----------------------------
 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h |  14 --
 drivers/gpu/drm/sti/sti_mixer.c            |  19 --
 drivers/gpu/drm/sti/sti_tvout.c            |  40 +---
 8 files changed, 14 insertions(+), 479 deletions(-)
 delete mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
 delete mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h

diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig
index 494ab25..acd7286 100644
--- a/drivers/gpu/drm/sti/Kconfig
+++ b/drivers/gpu/drm/sti/Kconfig
@@ -1,6 +1,6 @@
 config DRM_STI
-	tristate "DRM Support for STMicroelectronics SoC stiH41x Series"
-	depends on DRM && (SOC_STIH415 || SOC_STIH416 || ARCH_MULTIPLATFORM)
+	tristate "DRM Support for STMicroelectronics SoC stiH4xx Series"
+	depends on DRM && (ARCH_STI || ARCH_MULTIPLATFORM)
 	select RESET_CONTROLLER
 	select DRM_KMS_HELPER
 	select DRM_GEM_CMA_HELPER
@@ -9,4 +9,4 @@ config DRM_STI
 	select FW_LOADER
 	select SND_SOC_HDMI_CODEC if SND_SOC
 	help
-	  Choose this option to enable DRM on STM stiH41x chipset
+	  Choose this option to enable DRM on STM stiH4xx chipset
diff --git a/drivers/gpu/drm/sti/sti_compositor.c b/drivers/gpu/drm/sti/sti_compositor.c
index a6f391b..f62041f 100644
--- a/drivers/gpu/drm/sti/sti_compositor.c
+++ b/drivers/gpu/drm/sti/sti_compositor.c
@@ -39,22 +39,6 @@ static const struct sti_compositor_data stih407_compositor_data = {
 	},
 };
 
-/*
- * stiH416 compositor properties
- * Note:
- * on stih416 MIXER_AUX has a different base address from MIXER_MAIN
- * Moreover, GDPx is different for Main and Aux Mixer. So this subdev map does
- * not fit for stiH416 if we want to enable the MIXER_AUX.
- */
-static const struct sti_compositor_data stih416_compositor_data = {
-	.nb_subdev = 3,
-	.subdev_desc = {
-			{STI_GPD_SUBDEV, (int)STI_GDP_0, 0x100},
-			{STI_GPD_SUBDEV, (int)STI_GDP_1, 0x200},
-			{STI_MIXER_MAIN_SUBDEV, STI_MIXER_MAIN, 0xC00}
-	},
-};
-
 int sti_compositor_debugfs_init(struct sti_compositor *compo,
 				struct drm_minor *minor)
 {
@@ -179,9 +163,6 @@ static const struct component_ops sti_compositor_ops = {
 
 static const struct of_device_id compositor_of_match[] = {
 	{
-		.compatible = "st,stih416-compositor",
-		.data = &stih416_compositor_data,
-	}, {
 		.compatible = "st,stih407-compositor",
 		.data = &stih407_compositor_data,
 	}, {
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index a225c4d..e7c243f 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -62,14 +62,8 @@
 #define SCALE_CTRL_CR_DFLT              0x00DB0249
 
 /* Video DACs control */
-#define VIDEO_DACS_CONTROL_MASK         0x0FFF
-#define VIDEO_DACS_CONTROL_SYSCFG2535   0x085C /* for stih416 */
-#define DAC_CFG_HD_OFF_SHIFT            5
-#define DAC_CFG_HD_OFF_MASK             (0x7 << DAC_CFG_HD_OFF_SHIFT)
-#define VIDEO_DACS_CONTROL_SYSCFG5072   0x0120 /* for stih407 */
 #define DAC_CFG_HD_HZUVW_OFF_MASK       BIT(1)
 
-
 /* Upsampler values for the alternative 2X Filter */
 #define SAMPLER_COEF_NB                 8
 #define HDA_ANA_SRC_Y_CFG_ALT_2X        0x01130000
@@ -300,28 +294,14 @@ static bool hda_get_mode_idx(struct drm_display_mode mode, int *idx)
  */
 static void hda_enable_hd_dacs(struct sti_hda *hda, bool enable)
 {
-	u32 mask;
-
 	if (hda->video_dacs_ctrl) {
 		u32 val;
 
-		switch ((u32)hda->video_dacs_ctrl & VIDEO_DACS_CONTROL_MASK) {
-		case VIDEO_DACS_CONTROL_SYSCFG2535:
-			mask = DAC_CFG_HD_OFF_MASK;
-			break;
-		case VIDEO_DACS_CONTROL_SYSCFG5072:
-			mask = DAC_CFG_HD_HZUVW_OFF_MASK;
-			break;
-		default:
-			DRM_INFO("Video DACS control register not supported\n");
-			return;
-		}
-
 		val = readl(hda->video_dacs_ctrl);
 		if (enable)
-			val &= ~mask;
+			val &= ~DAC_CFG_HD_HZUVW_OFF_MASK;
 		else
-			val |= mask;
+			val |= DAC_CFG_HD_HZUVW_OFF_MASK;
 
 		writel(val, hda->video_dacs_ctrl);
 	}
@@ -352,24 +332,11 @@ static void hda_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
 static void hda_dbg_video_dacs_ctrl(struct seq_file *s, void __iomem *reg)
 {
 	u32 val = readl(reg);
-	u32 mask;
-
-	switch ((u32)reg & VIDEO_DACS_CONTROL_MASK) {
-	case VIDEO_DACS_CONTROL_SYSCFG2535:
-		mask = DAC_CFG_HD_OFF_MASK;
-		break;
-	case VIDEO_DACS_CONTROL_SYSCFG5072:
-		mask = DAC_CFG_HD_HZUVW_OFF_MASK;
-		break;
-	default:
-		DRM_DEBUG_DRIVER("Warning: DACS ctrl register not supported\n");
-		return;
-	}
 
 	seq_puts(s, "\n");
 	seq_printf(s, "\n  %-25s 0x%08X", "VIDEO_DACS_CONTROL", val);
 	seq_puts(s, "\tHD DACs ");
-	seq_puts(s, val & mask ? "disabled" : "enabled");
+	seq_puts(s, val & DAC_CFG_HD_HZUVW_OFF_MASK ? "disabled" : "enabled");
 }
 
 static int hda_dbg_show(struct seq_file *s, void *data)
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index 1f9e7b4..376b076 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -22,7 +22,6 @@
 
 #include "sti_hdmi.h"
 #include "sti_hdmi_tx3g4c28phy.h"
-#include "sti_hdmi_tx3g0c55phy.h"
 #include "sti_vtg.h"
 
 #define HDMI_CFG                        0x0000
@@ -1374,9 +1373,6 @@ static const struct component_ops sti_hdmi_ops = {
 
 static const struct of_device_id hdmi_of_match[] = {
 	{
-		.compatible = "st,stih416-hdmi",
-		.data = &tx3g0c55phy_ops,
-	}, {
 		.compatible = "st,stih407-hdmi",
 		.data = &tx3g4c28phy_ops,
 	}, {
@@ -1423,22 +1419,6 @@ static int sti_hdmi_probe(struct platform_device *pdev)
 		goto release_adapter;
 	}
 
-	if (of_device_is_compatible(np, "st,stih416-hdmi")) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						   "syscfg");
-		if (!res) {
-			DRM_ERROR("Invalid syscfg resource\n");
-			ret = -ENOMEM;
-			goto release_adapter;
-		}
-		hdmi->syscfg = devm_ioremap_nocache(dev, res->start,
-						    resource_size(res));
-		if (!hdmi->syscfg) {
-			ret = -ENOMEM;
-			goto release_adapter;
-		}
-	}
-
 	hdmi->phy_ops = (struct hdmi_phy_ops *)
 		of_match_node(hdmi_of_match, np)->data;
 
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
deleted file mode 100644
index 49ae8e4..0000000
--- a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics SA 2014
- * Author: Vincent Abriou <vincent.abriou at st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
- */
-
-#include "sti_hdmi_tx3g0c55phy.h"
-
-#define HDMI_SRZ_PLL_CFG                0x0504
-#define HDMI_SRZ_TAP_1                  0x0508
-#define HDMI_SRZ_TAP_2                  0x050C
-#define HDMI_SRZ_TAP_3                  0x0510
-#define HDMI_SRZ_CTRL                   0x0514
-
-#define HDMI_SRZ_PLL_CFG_POWER_DOWN     BIT(0)
-#define HDMI_SRZ_PLL_CFG_VCOR_SHIFT     1
-#define HDMI_SRZ_PLL_CFG_VCOR_425MHZ    0
-#define HDMI_SRZ_PLL_CFG_VCOR_850MHZ    1
-#define HDMI_SRZ_PLL_CFG_VCOR_1700MHZ   2
-#define HDMI_SRZ_PLL_CFG_VCOR_3000MHZ   3
-#define HDMI_SRZ_PLL_CFG_VCOR_MASK      3
-#define HDMI_SRZ_PLL_CFG_VCOR(x)        (x << HDMI_SRZ_PLL_CFG_VCOR_SHIFT)
-#define HDMI_SRZ_PLL_CFG_NDIV_SHIFT     8
-#define HDMI_SRZ_PLL_CFG_NDIV_MASK      (0x1F << HDMI_SRZ_PLL_CFG_NDIV_SHIFT)
-#define HDMI_SRZ_PLL_CFG_MODE_SHIFT     16
-#define HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ  0x1
-#define HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ  0x4
-#define HDMI_SRZ_PLL_CFG_MODE_27_MHZ    0x5
-#define HDMI_SRZ_PLL_CFG_MODE_33_75_MHZ 0x6
-#define HDMI_SRZ_PLL_CFG_MODE_40_5_MHZ  0x7
-#define HDMI_SRZ_PLL_CFG_MODE_54_MHZ    0x8
-#define HDMI_SRZ_PLL_CFG_MODE_67_5_MHZ  0x9
-#define HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ 0xA
-#define HDMI_SRZ_PLL_CFG_MODE_81_MHZ    0xB
-#define HDMI_SRZ_PLL_CFG_MODE_82_5_MHZ  0xC
-#define HDMI_SRZ_PLL_CFG_MODE_108_MHZ   0xD
-#define HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ 0xE
-#define HDMI_SRZ_PLL_CFG_MODE_165_MHZ   0xF
-#define HDMI_SRZ_PLL_CFG_MODE_MASK      0xF
-#define HDMI_SRZ_PLL_CFG_MODE(x)        (x << HDMI_SRZ_PLL_CFG_MODE_SHIFT)
-
-#define HDMI_SRZ_CTRL_POWER_DOWN        (1 << 0)
-#define HDMI_SRZ_CTRL_EXTERNAL_DATA_EN  (1 << 1)
-
-/* sysconf registers */
-#define HDMI_REJECTION_PLL_CONFIGURATION 0x0858	/* SYSTEM_CONFIG2534 */
-#define HDMI_REJECTION_PLL_STATUS        0x0948	/* SYSTEM_CONFIG2594 */
-
-#define REJECTION_PLL_HDMI_ENABLE_SHIFT 0
-#define REJECTION_PLL_HDMI_ENABLE_MASK  (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT)
-#define REJECTION_PLL_HDMI_PDIV_SHIFT   24
-#define REJECTION_PLL_HDMI_PDIV_MASK    (0x7 << REJECTION_PLL_HDMI_PDIV_SHIFT)
-#define REJECTION_PLL_HDMI_NDIV_SHIFT   16
-#define REJECTION_PLL_HDMI_NDIV_MASK    (0xFF << REJECTION_PLL_HDMI_NDIV_SHIFT)
-#define REJECTION_PLL_HDMI_MDIV_SHIFT   8
-#define REJECTION_PLL_HDMI_MDIV_MASK    (0xFF << REJECTION_PLL_HDMI_MDIV_SHIFT)
-
-#define REJECTION_PLL_HDMI_REJ_PLL_LOCK BIT(0)
-
-#define HDMI_TIMEOUT_PLL_LOCK  50   /*milliseconds */
-
-/**
- * pll mode structure
- *
- * A pointer to an array of these structures is passed to a TMDS (HDMI) output
- * via the control interface to provide board and SoC specific
- * configurations of the HDMI PHY. Each entry in the array specifies a hardware
- * specific configuration for a given TMDS clock frequency range. The array
- * should be terminated with an entry that has all fields set to zero.
- *
- * @min: Lower bound of TMDS clock frequency this entry applies to
- * @max: Upper bound of TMDS clock frequency this entry applies to
- * @mode: SoC specific register configuration
- */
-struct pllmode {
-	u32 min;
-	u32 max;
-	u32 mode;
-};
-
-#define NB_PLL_MODE 7
-static struct pllmode pllmodes[NB_PLL_MODE] = {
-	{13500000, 13513500, HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ},
-	{25174800, 25200000, HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ},
-	{27000000, 27027000, HDMI_SRZ_PLL_CFG_MODE_27_MHZ},
-	{54000000, 54054000, HDMI_SRZ_PLL_CFG_MODE_54_MHZ},
-	{72000000, 74250000, HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ},
-	{108000000, 108108000, HDMI_SRZ_PLL_CFG_MODE_108_MHZ},
-	{148351648, 297000000, HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ}
-};
-
-#define NB_HDMI_PHY_CONFIG 5
-static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = {
-	{0, 40000000, {0x00101010, 0x00101010, 0x00101010, 0x02} },
-	{40000000, 140000000, {0x00111111, 0x00111111, 0x00111111, 0x02} },
-	{140000000, 160000000, {0x00131313, 0x00101010, 0x00101010, 0x02} },
-	{160000000, 250000000, {0x00131313, 0x00111111, 0x00111111, 0x03FE} },
-	{250000000, 300000000, {0x00151515, 0x00101010, 0x00101010, 0x03FE} },
-};
-
-#define PLL_CHANGE_DELAY	1 /* ms */
-
-/**
- * Disable the pll rejection
- *
- * @hdmi: pointer on the hdmi internal structure
- *
- * return true if the pll has been disabled
- */
-static bool disable_pll_rejection(struct sti_hdmi *hdmi)
-{
-	u32 val;
-
-	DRM_DEBUG_DRIVER("\n");
-
-	val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-	val &= ~REJECTION_PLL_HDMI_ENABLE_MASK;
-	writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-
-	msleep(PLL_CHANGE_DELAY);
-	val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
-
-	return !(val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
-}
-
-/**
- * Enable the old BCH/rejection PLL is now reused to provide the CLKPXPLL
- * clock input to the new PHY PLL that generates the serializer clock
- * (TMDS*10) and the TMDS clock which is now fed back into the HDMI
- * formatter instead of the TMDS clock line from ClockGenB.
- *
- * @hdmi: pointer on the hdmi internal structure
- *
- * return true if pll has been correctly set
- */
-static bool enable_pll_rejection(struct sti_hdmi *hdmi)
-{
-	unsigned int inputclock;
-	u32 mdiv, ndiv, pdiv, val;
-
-	DRM_DEBUG_DRIVER("\n");
-
-	if (!disable_pll_rejection(hdmi))
-		return false;
-
-	inputclock = hdmi->mode.clock * 1000;
-
-	DRM_DEBUG_DRIVER("hdmi rejection pll input clock = %dHz\n", inputclock);
-
-
-	/* Power up the HDMI rejection PLL
-	 * Note: On this SoC (stiH416) we are forced to have the input clock
-	 * be equal to the HDMI pixel clock.
-	 *
-	 * The values here have been suggested by validation however they are
-	 * still provisional and subject to change.
-	 *
-	 * PLLout = (Fin*Mdiv) / ((2 * Ndiv) / 2^Pdiv)
-	 */
-	if (inputclock < 50000000) {
-		/*
-		 * For slower clocks we need to multiply more to keep the
-		 * internal VCO frequency within the physical specification
-		 * of the PLL.
-		 */
-		pdiv = 4;
-		ndiv = 240;
-		mdiv = 30;
-	} else {
-		pdiv = 2;
-		ndiv = 60;
-		mdiv = 30;
-	}
-
-	val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-
-	val &= ~(REJECTION_PLL_HDMI_PDIV_MASK |
-		REJECTION_PLL_HDMI_NDIV_MASK |
-		REJECTION_PLL_HDMI_MDIV_MASK |
-		REJECTION_PLL_HDMI_ENABLE_MASK);
-
-	val |=	(pdiv << REJECTION_PLL_HDMI_PDIV_SHIFT) |
-		(ndiv << REJECTION_PLL_HDMI_NDIV_SHIFT) |
-		(mdiv << REJECTION_PLL_HDMI_MDIV_SHIFT) |
-		(0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT);
-
-	writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-
-	msleep(PLL_CHANGE_DELAY);
-	val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
-
-	return (val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
-}
-
-/**
- * Start hdmi phy macro cell tx3g0c55
- *
- * @hdmi: pointer on the hdmi internal structure
- *
- * Return false if an error occur
- */
-static bool sti_hdmi_tx3g0c55phy_start(struct sti_hdmi *hdmi)
-{
-	u32 ckpxpll = hdmi->mode.clock * 1000;
-	u32 val, tmdsck, freqvco, pllctrl = 0;
-	unsigned int i;
-
-	if (!enable_pll_rejection(hdmi))
-		return false;
-
-	DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll);
-
-	/* Assuming no pixel repetition and 24bits color */
-	tmdsck = ckpxpll;
-	pllctrl = 2 << HDMI_SRZ_PLL_CFG_NDIV_SHIFT;
-
-	/*
-	 * Setup the PLL mode parameter based on the ckpxpll. If we haven't got
-	 * a clock frequency supported by one of the specific PLL modes then we
-	 * will end up using the generic mode (0) which only supports a 10x
-	 * multiplier, hence only 24bit color.
-	 */
-	for (i = 0; i < NB_PLL_MODE; i++) {
-		if (ckpxpll >= pllmodes[i].min && ckpxpll <= pllmodes[i].max)
-			pllctrl |= HDMI_SRZ_PLL_CFG_MODE(pllmodes[i].mode);
-	}
-
-	freqvco = tmdsck * 10;
-	if (freqvco <= 425000000UL)
-		pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_425MHZ);
-	else if (freqvco <= 850000000UL)
-		pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_850MHZ);
-	else if (freqvco <= 1700000000UL)
-		pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_1700MHZ);
-	else if (freqvco <= 2970000000UL)
-		pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_3000MHZ);
-	else {
-		DRM_ERROR("PHY serializer clock out of range\n");
-		goto err;
-	}
-
-	/*
-	 * Configure and power up the PHY PLL
-	 */
-	hdmi->event_received = false;
-	DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl);
-	hdmi_write(hdmi, pllctrl, HDMI_SRZ_PLL_CFG);
-
-	/* wait PLL interrupt */
-	wait_event_interruptible_timeout(hdmi->wait_event,
-					 hdmi->event_received == true,
-					 msecs_to_jiffies
-					 (HDMI_TIMEOUT_PLL_LOCK));
-
-	if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) {
-		DRM_ERROR("hdmi phy pll not locked\n");
-		goto err;
-	}
-
-	DRM_DEBUG_DRIVER("got PHY PLL Lock\n");
-
-	/*
-	 * To configure the source termination and pre-emphasis appropriately
-	 * for different high speed TMDS clock frequencies a phy configuration
-	 * table must be provided, tailored to the SoC and board combination.
-	 */
-	for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) {
-		if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) &&
-		    (hdmiphy_config[i].max_tmds_freq >= tmdsck)) {
-			val = hdmiphy_config[i].config[0];
-			hdmi_write(hdmi, val, HDMI_SRZ_TAP_1);
-			val = hdmiphy_config[i].config[1];
-			hdmi_write(hdmi, val, HDMI_SRZ_TAP_2);
-			val = hdmiphy_config[i].config[2];
-			hdmi_write(hdmi, val, HDMI_SRZ_TAP_3);
-			val = hdmiphy_config[i].config[3];
-			val |= HDMI_SRZ_CTRL_EXTERNAL_DATA_EN;
-			val &= ~HDMI_SRZ_CTRL_POWER_DOWN;
-			hdmi_write(hdmi, val, HDMI_SRZ_CTRL);
-
-			DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x 0x%x\n",
-					 hdmiphy_config[i].config[0],
-					 hdmiphy_config[i].config[1],
-					 hdmiphy_config[i].config[2],
-					 hdmiphy_config[i].config[3]);
-			return true;
-		}
-	}
-
-	/*
-	 * Default, power up the serializer with no pre-emphasis or source
-	 * termination.
-	 */
-	hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_1);
-	hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_2);
-	hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_3);
-	hdmi_write(hdmi, HDMI_SRZ_CTRL_EXTERNAL_DATA_EN, HDMI_SRZ_CTRL);
-
-	return true;
-
-err:
-	disable_pll_rejection(hdmi);
-
-	return false;
-}
-
-/**
- * Stop hdmi phy macro cell tx3g0c55
- *
- * @hdmi: pointer on the hdmi internal structure
- */
-static void sti_hdmi_tx3g0c55phy_stop(struct sti_hdmi *hdmi)
-{
-	DRM_DEBUG_DRIVER("\n");
-
-	hdmi->event_received = false;
-
-	hdmi_write(hdmi, HDMI_SRZ_CTRL_POWER_DOWN, HDMI_SRZ_CTRL);
-	hdmi_write(hdmi, HDMI_SRZ_PLL_CFG_POWER_DOWN, HDMI_SRZ_PLL_CFG);
-
-	/* wait PLL interrupt */
-	wait_event_interruptible_timeout(hdmi->wait_event,
-					 hdmi->event_received == true,
-					 msecs_to_jiffies
-					 (HDMI_TIMEOUT_PLL_LOCK));
-
-	if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK)
-		DRM_ERROR("hdmi phy pll not well disabled\n");
-
-	disable_pll_rejection(hdmi);
-}
-
-struct hdmi_phy_ops tx3g0c55phy_ops = {
-	.start = sti_hdmi_tx3g0c55phy_start,
-	.stop = sti_hdmi_tx3g0c55phy_stop,
-};
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
deleted file mode 100644
index 068237b..0000000
--- a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics SA 2014
- * Author: Benjamin Gaignard <benjamin.gaignard at st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
- */
-
-#ifndef _STI_HDMI_TX3G0C55PHY_H_
-#define _STI_HDMI_TX3G0C55PHY_H_
-
-#include "sti_hdmi.h"
-
-extern struct hdmi_phy_ops tx3g0c55phy_ops;
-
-#endif
diff --git a/drivers/gpu/drm/sti/sti_mixer.c b/drivers/gpu/drm/sti/sti_mixer.c
index b78cec5..4ddc58f 100644
--- a/drivers/gpu/drm/sti/sti_mixer.c
+++ b/drivers/gpu/drm/sti/sti_mixer.c
@@ -16,12 +16,6 @@ static unsigned int bkg_color = 0x000000;
 MODULE_PARM_DESC(bkgcolor, "Value of the background color 0xRRGGBB");
 module_param_named(bkgcolor, bkg_color, int, 0644);
 
-/* Identity: G=Y , B=Cb , R=Cr */
-static const u32 mixerColorSpaceMatIdentity[] = {
-	0x10000000, 0x00000000, 0x10000000, 0x00001000,
-	0x00000000, 0x00000000, 0x00000000, 0x00000000
-};
-
 /* regs offset */
 #define GAM_MIXER_CTL      0x00
 #define GAM_MIXER_BKC      0x04
@@ -358,22 +352,12 @@ int sti_mixer_set_plane_status(struct sti_mixer *mixer,
 	return 0;
 }
 
-static void sti_mixer_set_matrix(struct sti_mixer *mixer)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(mixerColorSpaceMatIdentity); i++)
-		sti_mixer_reg_write(mixer, GAM_MIXER_MX0 + (i * 4),
-				    mixerColorSpaceMatIdentity[i]);
-}
-
 struct sti_mixer *sti_mixer_create(struct device *dev,
 				   struct drm_device *drm_dev,
 				   int id,
 				   void __iomem *baseaddr)
 {
 	struct sti_mixer *mixer = devm_kzalloc(dev, sizeof(*mixer), GFP_KERNEL);
-	struct device_node *np = dev->of_node;
 
 	dev_dbg(dev, "%s\n", __func__);
 	if (!mixer) {
@@ -384,9 +368,6 @@ struct sti_mixer *sti_mixer_create(struct device *dev,
 	mixer->dev = dev;
 	mixer->id = id;
 
-	if (of_device_is_compatible(np, "st,stih416-compositor"))
-		sti_mixer_set_matrix(mixer);
-
 	DRM_DEBUG_DRIVER("%s created. Regs=%p\n",
 			 sti_mixer_to_str(mixer), mixer->regs);
 
diff --git a/drivers/gpu/drm/sti/sti_tvout.c b/drivers/gpu/drm/sti/sti_tvout.c
index cc07e06..ad46d35 100644
--- a/drivers/gpu/drm/sti/sti_tvout.c
+++ b/drivers/gpu/drm/sti/sti_tvout.c
@@ -210,13 +210,11 @@ static void tvout_vip_set_rnd(struct sti_tvout *tvout, int reg, u32 rnd)
  * @tvout: tvout structure
  * @reg: register to set
  * @main_path: main or auxiliary path
- * @sel_input_logic_inverted: need to invert the logic
  * @sel_input: selected_input (main/aux + conv)
  */
 static void tvout_vip_set_sel_input(struct sti_tvout *tvout,
 				    int reg,
 				    bool main_path,
-				    bool sel_input_logic_inverted,
 				    enum sti_tvout_video_out_type video_out)
 {
 	u32 sel_input;
@@ -237,8 +235,7 @@ static void tvout_vip_set_sel_input(struct sti_tvout *tvout,
 	}
 
 	/* on stih407 chip the sel_input bypass mode logic is inverted */
-	if (sel_input_logic_inverted)
-		sel_input = sel_input ^ TVO_VIP_SEL_INPUT_BYPASS_MASK;
+	sel_input = sel_input ^ TVO_VIP_SEL_INPUT_BYPASS_MASK;
 
 	val &= ~TVO_VIP_SEL_INPUT_MASK;
 	val |= sel_input;
@@ -296,8 +293,6 @@ static void tvout_preformatter_set_matrix(struct sti_tvout *tvout,
  */
 static void tvout_dvo_start(struct sti_tvout *tvout, bool main_path)
 {
-	struct device_node *node = tvout->dev->of_node;
-	bool sel_input_logic_inverted = false;
 	u32 tvo_in_vid_format;
 	int val, tmp;
 
@@ -335,16 +330,11 @@ static void tvout_dvo_start(struct sti_tvout *tvout, bool main_path)
 	/* Set round mode (rounded to 8-bit per component) */
 	tvout_vip_set_rnd(tvout, TVO_VIP_DVO, TVO_VIP_RND_8BIT_ROUNDED);
 
-	if (of_device_is_compatible(node, "st,stih407-tvout")) {
-		/* Set input video format */
-		tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format,
-					 TVO_IN_FMT_SIGNED);
-		sel_input_logic_inverted = true;
-	}
+	/* Set input video format */
+	tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format, TVO_IN_FMT_SIGNED);
 
 	/* Input selection */
 	tvout_vip_set_sel_input(tvout, TVO_VIP_DVO, main_path,
-				sel_input_logic_inverted,
 				STI_TVOUT_VIDEO_OUT_RGB);
 }
 
@@ -357,8 +347,6 @@ static void tvout_dvo_start(struct sti_tvout *tvout, bool main_path)
  */
 static void tvout_hdmi_start(struct sti_tvout *tvout, bool main_path)
 {
-	struct device_node *node = tvout->dev->of_node;
-	bool sel_input_logic_inverted = false;
 	u32 tvo_in_vid_format;
 
 	dev_dbg(tvout->dev, "%s\n", __func__);
@@ -391,16 +379,12 @@ static void tvout_hdmi_start(struct sti_tvout *tvout, bool main_path)
 	/* set round mode (rounded to 8-bit per component) */
 	tvout_vip_set_rnd(tvout, TVO_VIP_HDMI, TVO_VIP_RND_8BIT_ROUNDED);
 
-	if (of_device_is_compatible(node, "st,stih407-tvout")) {
-		/* set input video format */
-		tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format,
-					TVO_IN_FMT_SIGNED);
-		sel_input_logic_inverted = true;
-	}
+	/* set input video format */
+	tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format, TVO_IN_FMT_SIGNED);
 
 	/* input selection */
 	tvout_vip_set_sel_input(tvout, TVO_VIP_HDMI, main_path,
-			sel_input_logic_inverted, STI_TVOUT_VIDEO_OUT_RGB);
+				STI_TVOUT_VIDEO_OUT_RGB);
 }
 
 /**
@@ -412,8 +396,6 @@ static void tvout_hdmi_start(struct sti_tvout *tvout, bool main_path)
  */
 static void tvout_hda_start(struct sti_tvout *tvout, bool main_path)
 {
-	struct device_node *node = tvout->dev->of_node;
-	bool sel_input_logic_inverted = false;
 	u32 tvo_in_vid_format;
 	int val;
 
@@ -449,16 +431,11 @@ static void tvout_hda_start(struct sti_tvout *tvout, bool main_path)
 	/* set round mode (rounded to 10-bit per component) */
 	tvout_vip_set_rnd(tvout, TVO_VIP_HDF, TVO_VIP_RND_10BIT_ROUNDED);
 
-	if (of_device_is_compatible(node, "st,stih407-tvout")) {
-		/* set input video format */
-		tvout_vip_set_in_vid_fmt(tvout,
-			tvo_in_vid_format, TVO_IN_FMT_SIGNED);
-		sel_input_logic_inverted = true;
-	}
+	/* Set input video format */
+	tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format, TVO_IN_FMT_SIGNED);
 
 	/* Input selection */
 	tvout_vip_set_sel_input(tvout, TVO_VIP_HDF, main_path,
-				sel_input_logic_inverted,
 				STI_TVOUT_VIDEO_OUT_YUV);
 
 	/* power up HD DAC */
@@ -906,7 +883,6 @@ static int sti_tvout_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id tvout_of_match[] = {
-	{ .compatible = "st,stih416-tvout", },
 	{ .compatible = "st,stih407-tvout", },
 	{ /* end node */ }
 };
-- 
1.9.1



More information about the dri-devel mailing list