[PATCH 2/7] drm/doc: Polish for drm_plane.[hc]
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Sep 21 08:59:25 UTC 2016
Big thing is untangling and carefully documenting the different uapi
types of planes. I also sprinkled a few more cross references around
to make this easier to discover.
As usual, remove the kerneldoc for internal functions which are not
exported. Aside: We should probably go OCD on all the ioctl handlers
and consistenly give them an _ioctl postfix.
Acked-by: Archit Taneja <architt at codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
Documentation/gpu/drm-kms.rst | 47 +--------------
drivers/gpu/drm/drm_crtc.c | 6 +-
drivers/gpu/drm/drm_plane.c | 132 ++++++++----------------------------------
include/drm/drm_plane.h | 57 +++++++++++++++++-
4 files changed, 86 insertions(+), 156 deletions(-)
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 33181be97151..b1029e292e5c 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -113,6 +113,9 @@ a hardware-specific ioctl to allocate suitable buffer objects.
Plane Abstraction
=================
+.. kernel-doc:: drivers/gpu/drm/drm_plane.c
+ :doc: overview
+
Plane Functions Reference
-------------------------
@@ -189,50 +192,6 @@ allocated and zeroed by the driver, possibly as part of a larger
structure, and registered with a call to :c:func:`drm_crtc_init()`
with a pointer to CRTC functions.
-Planes (:c:type:`struct drm_plane <drm_plane>`)
------------------------------------------------
-
-A plane represents an image source that can be blended with or overlayed
-on top of a CRTC during the scanout process. Planes are associated with
-a frame buffer to crop a portion of the image memory (source) and
-optionally scale it to a destination size. The result is then blended
-with or overlayed on top of a CRTC.
-
-The DRM core recognizes three types of planes:
-
-- DRM_PLANE_TYPE_PRIMARY represents a "main" plane for a CRTC.
- Primary planes are the planes operated upon by CRTC modesetting and
- flipping operations described in the page_flip hook in
- :c:type:`struct drm_crtc_funcs <drm_crtc_funcs>`.
-- DRM_PLANE_TYPE_CURSOR represents a "cursor" plane for a CRTC.
- Cursor planes are the planes operated upon by the
- DRM_IOCTL_MODE_CURSOR and DRM_IOCTL_MODE_CURSOR2 ioctls.
-- DRM_PLANE_TYPE_OVERLAY represents all non-primary, non-cursor
- planes. Some drivers refer to these types of planes as "sprites"
- internally.
-
-For compatibility with legacy userspace, only overlay planes are made
-available to userspace by default. Userspace clients may set the
-DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate
-that they wish to receive a universal plane list containing all plane
-types.
-
-Plane Initialization
-~~~~~~~~~~~~~~~~~~~~
-
-To create a plane, a KMS drivers allocates and zeroes an instances of
-:c:type:`struct drm_plane <drm_plane>` (possibly as part of a
-larger structure) and registers it with a call to
-:c:func:`drm_universal_plane_init()`. The function takes a
-bitmask of the CRTCs that can be associated with the plane, a pointer to
-the plane functions, a list of format supported formats, and the type of
-plane (primary, cursor, or overlay) being initialized.
-
-Cursor and overlay planes are optional. All drivers should provide one
-primary plane per CRTC (although this requirement may change in the
-future); drivers that do not wish to provide special handling for
-primary planes may make use of the helper functions described in ? to
-create and register a primary plane with standard capabilities.
Cleanup
-------
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 513ab4729683..9ef7955032db 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -151,7 +151,11 @@ static void drm_crtc_unregister_all(struct drm_device *dev)
* @funcs: callbacks for the new CRTC
* @name: printf style format string for the CRTC name, or NULL for default name
*
- * Inits a new object created as base part of a driver crtc object.
+ * Inits a new object created as base part of a driver crtc object. Drivers
+ * should use this function instead of drm_crtc_init(), which is only provided
+ * for backwards compatibility with drivers which do not yet support universal
+ * planes). For really simple hardware which has only 1 plane look at
+ * drm_simple_display_pipe_init() instead.
*
* Returns:
* Zero on success, error code on failure.
diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
index 9003b5f835cf..c17c9c2a342e 100644
--- a/drivers/gpu/drm/drm_plane.c
+++ b/drivers/gpu/drm/drm_plane.c
@@ -25,6 +25,28 @@
#include "drm_crtc_internal.h"
+/**
+ * DOC: overview
+ *
+ * A plane represents an image source that can be blended with or overlayed on
+ * top of a CRTC during the scanout process. Planes take their input data from a
+ * &drm_framebuffer object. The plane itself specifies the cropping and scaling
+ * of that image, and where it is placed on the visible are of a display
+ * pipeline, represented by &drm_crtc. A plane can also have additional
+ * properties that specify how the pixels are positioned and blended, like
+ * rotation or Z-position. All these properties are stored in &drm_plane_state.
+ *
+ * To create a plane, a KMS drivers allocates and zeroes an instances of
+ * struct &drm_plane (possibly as part of a larger structure) and registers it
+ * with a call to drm_universal_plane_init().
+ *
+ * Cursor and overlay planes are optional. All drivers should provide one
+ * primary plane per CRTC to avoid surprising userspace too much. See enum
+ * &drm_plane_type for a more in-depth discussion of these special uapi-relevant
+ * plane types. Special planes are associated with their CRTC by calling
+ * drm_crtc_init_with_planes().
+ */
+
static unsigned int drm_num_planes(struct drm_device *dev)
{
unsigned int num = 0;
@@ -303,19 +325,6 @@ int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
}
EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
-/**
- * drm_mode_getplane_res - enumerate all plane resources
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * Construct a list of plane ids to return to the user.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
int drm_mode_getplane_res(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
@@ -364,19 +373,6 @@ int drm_mode_getplane_res(struct drm_device *dev, void *data,
return 0;
}
-/**
- * drm_mode_getplane - get plane configuration
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * Construct a plane configuration structure to return to the user.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
int drm_mode_getplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
@@ -425,15 +421,6 @@ int drm_mode_getplane(struct drm_device *dev, void *data,
return 0;
}
-/**
- * drm_plane_check_pixel_format - Check if the plane supports the pixel format
- * @plane: plane to check for format support
- * @format: the pixel format
- *
- * Returns:
- * Zero of @plane has @format in its list of supported pixel formats, -EINVAL
- * otherwise.
- */
int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format)
{
unsigned int i;
@@ -552,19 +539,6 @@ static int setplane_internal(struct drm_plane *plane,
return ret;
}
-/**
- * drm_mode_setplane - configure a plane's configuration
- * @dev: DRM device
- * @data: ioctl data*
- * @file_priv: DRM file info
- *
- * Set plane configuration, including placement, fb, scaling, and other factors.
- * Or pass a NULL fb to disable (planes may be disabled without providing a
- * valid crtc).
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
int drm_mode_setplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
@@ -614,25 +588,6 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
plane_req->src_w, plane_req->src_h);
}
-/**
- * drm_mode_cursor_universal - translate legacy cursor ioctl call into a
- * universal plane handler call
- * @crtc: crtc to update cursor for
- * @req: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Legacy cursor ioctl's work directly with driver buffer handles. To
- * translate legacy ioctl calls into universal plane handler calls, we need to
- * wrap the native buffer handle in a drm_framebuffer.
- *
- * Note that we assume any handle passed to the legacy ioctls was a 32-bit ARGB
- * buffer with a pitch of 4*width; the universal plane interface should be used
- * directly in cases where the hardware can support other buffer settings and
- * userspace wants to make use of these capabilities.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
static int drm_mode_cursor_universal(struct drm_crtc *crtc,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv)
@@ -768,19 +723,6 @@ out:
}
-/**
- * drm_mode_cursor_ioctl - set CRTC's cursor configuration
- * @dev: drm device for the ioctl
- * @data: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Set the cursor configuration based on user request.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
int drm_mode_cursor_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
@@ -793,20 +735,10 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
return drm_mode_cursor_common(dev, &new_req, file_priv);
}
-/**
- * drm_mode_cursor2_ioctl - set CRTC's cursor configuration
- * @dev: drm device for the ioctl
- * @data: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
+/*
* Set the cursor configuration based on user request. This implements the 2nd
* version of the cursor ioctl, which allows userspace to additionally specify
* the hotspot of the pointer.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
*/
int drm_mode_cursor2_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
@@ -816,24 +748,6 @@ int drm_mode_cursor2_ioctl(struct drm_device *dev,
return drm_mode_cursor_common(dev, req, file_priv);
}
-/**
- * drm_mode_page_flip_ioctl - schedule an asynchronous fb update
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * This schedules an asynchronous update on a given CRTC, called page flip.
- * Optionally a drm event is generated to signal the completion of the event.
- * Generic drivers cannot assume that a pageflip with changed framebuffer
- * properties (including driver specific metadata like tiling layout) will work,
- * but some drivers support e.g. pixel format changes through the pageflip
- * ioctl.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index 1407715736a5..256219bfd07b 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -319,10 +319,48 @@ struct drm_plane_funcs {
void (*early_unregister)(struct drm_plane *plane);
};
+/**
+ * enum drm_plane_type - uapi plane type enumeration
+ *
+ * For historical reasons not all planes are made the same. This enumeration is
+ * used to tell the different types of planes apart to implement the different
+ * uapi semantics for them. For userspace which is universal plane aware and
+ * which is using that atomic IOCTL there's no difference between these planes
+ * (beyong what the driver and hardware can support of course).
+ *
+ * For compatibility with legacy userspace, only overlay planes are made
+ * available to userspace by default. Userspace clients may set the
+ * DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate that they
+ * wish to receive a universal plane list containing all plane types. See also
+ * drm_for_each_legacy_plane().
+ */
enum drm_plane_type {
- DRM_PLANE_TYPE_OVERLAY,
+ /**
+ * @DRM_PLANE_TYPE_PRIMARY:
+ *
+ * Primary planes represent a "main" plane for a CRTC. Primary planes
+ * are the planes operated upon by CRTC modesetting and flipping
+ * operations described in the page_flip and set_config hooks in struct
+ * &drm_crtc_funcs.
+ */
DRM_PLANE_TYPE_PRIMARY,
+
+ /**
+ * @DRM_PLANE_TYPE_CURSOR:
+ *
+ * Cursor planes represent a "cursor" plane for a CRTC. Cursor planes
+ * are the planes operated upon by the DRM_IOCTL_MODE_CURSOR and
+ * DRM_IOCTL_MODE_CURSOR2 IOCTLs.
+ */
DRM_PLANE_TYPE_CURSOR,
+
+ /**
+ * @DRM_PLANE_TYPE_OVERLAY:
+ *
+ * Overlay planes represent all non-primary, non-cursor planes. Some
+ * drivers refer to these types of planes as "sprites" internally.
+ */
+ DRM_PLANE_TYPE_OVERLAY,
};
@@ -458,11 +496,26 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
for_each_if ((plane_mask) & (1 << drm_plane_index(plane)))
-/* Plane list iterator for legacy (overlay only) planes. */
+/**
+ * drm_for_each_legacy_plane - iterate over all planes for legacy userspace
+ * @plane: the loop cursor
+ * @dev: the DRM device
+ *
+ * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
+ * This is useful for implementing userspace apis when userspace is not
+ * universal plane aware. See also enum &drm_plane_type.
+ */
#define drm_for_each_legacy_plane(plane, dev) \
list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+/**
+ * drm_for_each_plane - iterate over all planes
+ * @plane: the loop cursor
+ * @dev: the DRM device
+ *
+ * Iterate over all planes of @dev, include primary and cursor planes.
+ */
#define drm_for_each_plane(plane, dev) \
list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
--
2.7.4
More information about the dri-devel
mailing list