[PATCH V5 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge
Archit Taneja
architt at codeaurora.org
Mon Sep 26 08:31:26 UTC 2016
Hi Peter,
On 09/26/2016 01:57 PM, Peter Senna Tschudin wrote:
> Patch 1/4 is already on linux-next, but what about this one? Ping?
I'd posted some queries a couple of times which you didn't answer to.
Could you please respond to them before we try to get this merged?
Archit
>
> On Tuesday, August 9, 2016 18:41 CEST, Peter Senna Tschudin <peter.senna at collabora.com> wrote:
>
>> Add a driver that create a drm_bridge and a drm_connector for the LVDS
>> to DP++ display bridge of the GE B850v3.
>>
>> There are two physical bridges on the video signal pipeline: a
>> STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The hardware and
>> firmware made it complicated for this binding to comprise two device
>> tree nodes, as the design goal is to configure both bridges based on
>> the LVDS signal, which leave the driver powerless to control the video
>> processing pipeline. The two bridges behaves as a single bridge, and
>> the driver is only needed for telling the host about EDID / HPD, and
>> for giving the host powers to ack interrupts. The video signal pipeline
>> is as follows:
>>
>> Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
>>
>> Cc: Martyn Welch <martyn.welch at collabora.co.uk>
>> Cc: Martin Donnelly <martin.donnelly at ge.com>
>> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
>> Cc: Enric Balletbo i Serra <enric.balletbo at collabora.com>
>> Cc: Philipp Zabel <p.zabel at pengutronix.de>
>> Cc: Rob Herring <robh at kernel.org>
>> Cc: Fabio Estevam <fabio.estevam at nxp.com>
>> CC: David Airlie <airlied at linux.ie>
>> CC: Thierry Reding <treding at nvidia.com>
>> CC: Thierry Reding <thierry.reding at gmail.com>
>> Reviewed-by: Enric Balletbo <enric.balletbo at collabora.com>
>> Signed-off-by: Peter Senna Tschudin <peter.senna at collabora.com>
>> ---
>> Changes from V4:
>> - Check the output of the first call to i2c_smbus_write_word_data() and return
>> it's error code for failing gracefully on i2c issues
>> - Renamed the i2c_driver.name from "ge,b850v3-lvds-dp" to "b850v3-lvds-dp" to
>> remove the comma from the driver name
>>
>> Changes from V3:
>> - 3/4 instead of 4/5
>> - Tested on next-20160804
>>
>> Changes from V2:
>> - Made it atomic to be applied on next-20160729 on top of Liu Ying changes
>> that made imx-ldb atomic
>>
>> Changes from V1:
>> - New commit message
>> - Removed 3 empty entry points
>> - Removed memory leak from ge_b850v3_lvds_dp_get_modes()
>> - Added a lock for mode setting
>> - Removed a few blank lines
>> - Changed the order at Makefile and Kconfig
>>
>> MAINTAINERS | 8 +
>> drivers/gpu/drm/bridge/Kconfig | 11 +
>> drivers/gpu/drm/bridge/Makefile | 1 +
>> drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c | 405 +++++++++++++++++++++++++++++
>> 4 files changed, 425 insertions(+)
>> create mode 100644 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index a306795..e8d106a 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -5142,6 +5142,14 @@ W: https://linuxtv.org
>> S: Maintained
>> F: drivers/media/radio/radio-gemtek*
>>
>> +GENERAL ELECTRIC B850V3 LVDS/DP++ BRIDGE
>> +M: Peter Senna Tschudin <peter.senna at collabora.com>
>> +M: Martin Donnelly <martin.donnelly at ge.com>
>> +M: Martyn Welch <martyn.welch at collabora.co.uk>
>> +S: Maintained
>> +F: drivers/gpu/drm/bridge/ge_b850v3_dp2.c
>> +F: Documentation/devicetree/bindings/ge/b850v3_dp2_bridge.txt
>> +
>> GENERIC GPIO I2C DRIVER
>> M: Haavard Skinnemoen <hskinnemoen at gmail.com>
>> S: Supported
>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
>> index b590e67..b4b70fb 100644
>> --- a/drivers/gpu/drm/bridge/Kconfig
>> +++ b/drivers/gpu/drm/bridge/Kconfig
>> @@ -32,6 +32,17 @@ config DRM_DW_HDMI_AHB_AUDIO
>> Designware HDMI block. This is used in conjunction with
>> the i.MX6 HDMI driver.
>>
>> +config DRM_GE_B850V3_LVDS_DP
>> + tristate "GE B850v3 LVDS to DP++ display bridge"
>> + depends on OF
>> + select DRM_KMS_HELPER
>> + select DRM_PANEL
>> + ---help---
>> + This is a driver for the display bridge of
>> + GE B850v3 that convert dual channel LVDS
>> + to DP++. This is used with the i.MX6 imx-ldb
>> + driver.
>> +
>> config DRM_NXP_PTN3460
>> tristate "NXP PTN3460 DP/LVDS bridge"
>> depends on OF
>> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
>> index efdb07e..b9606f3 100644
>> --- a/drivers/gpu/drm/bridge/Makefile
>> +++ b/drivers/gpu/drm/bridge/Makefile
>> @@ -3,6 +3,7 @@ ccflags-y := -Iinclude/drm
>> obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
>> obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>> obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>> +obj-$(CONFIG_DRM_GE_B850V3_LVDS_DP) += ge_b850v3_lvds_dp.o
>> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
>> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
>> obj-$(CONFIG_DRM_SII902X) += sii902x.o
>> diff --git a/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
>> new file mode 100644
>> index 0000000..81e9279
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
>> @@ -0,0 +1,405 @@
>> +/*
>> + * Driver for GE B850v3 DP display bridge
>> +
>> + * Copyright (c) 2016, Collabora Ltd.
>> + * Copyright (c) 2016, General Electric Company
>> +
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> +
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> +
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> +
>> + * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++
>> + * display bridge of the GE B850v3. There are two physical bridges on the video
>> + * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). However
>> + * the physical bridges are automatically configured by the input video signal,
>> + * and the driver has no access to the video processing pipeline. The driver is
>> + * only needed to read EDID from the STDP2690 and to handle HPD events from the
>> + * STDP4028. The driver communicates with both bridges over i2c. The video
>> + * signal pipeline is as follows:
>> + *
>> + * Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
>> + *
>> + */
>> +
>> +#include <linux/gpio.h>
>> +#include <linux/i2c.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <drm/drm_atomic.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_edid.h>
>> +#include <drm/drmP.h>
>> +
>> +/*
>> + * 220Mhz is a limitation of the host, as the bridge is capable of up to
>> + * 330Mhz. See section 9.2.1.2.4 of the i.MX 6Dual/6Quad Applications
>> + * Processor Reference Manual for more information about the 220Mhz limit.
>> + * The imx-ldb driver will warn about clocks over 170Mhz, but it seem to work
>> + * fine.
>> + */
>> +#define MAX_PIXEL_CLOCK 220000
>> +
>> +#define EDID_EXT_BLOCK_CNT 0x7E
>> +
>> +#define STDP4028_IRQ_OUT_CONF_REG 0x02
>> +#define STDP4028_DPTX_IRQ_EN_REG 0x3C
>> +#define STDP4028_DPTX_IRQ_STS_REG 0x3D
>> +#define STDP4028_DPTX_STS_REG 0x3E
>> +
>> +#define STDP4028_DPTX_DP_IRQ_EN 0x1000
>> +
>> +#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400
>> +#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000
>> +#define STDP4028_DPTX_IRQ_CONFIG \
>> + (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
>> +
>> +#define STDP4028_DPTX_HOTPLUG_STS 0x0200
>> +#define STDP4028_DPTX_LINK_STS 0x1000
>> +#define STDP4028_CON_STATE_CONNECTED \
>> + (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
>> +
>> +#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400
>> +#define STDP4028_DPTX_LINK_CH_STS 0x2000
>> +#define STDP4028_DPTX_IRQ_CLEAR \
>> + (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
>> +
>> +struct ge_b850v3_lvds_dp {
>> + struct drm_connector connector;
>> + struct drm_bridge bridge;
>> + struct i2c_client *ge_b850v3_lvds_dp_i2c;
>> + struct i2c_client *edid_i2c;
>> + struct edid *edid;
>> + struct mutex lock;
>> +};
>> +
>> +static inline struct ge_b850v3_lvds_dp *
>> + bridge_to_ge_b850v3_lvds_dp(struct drm_bridge *bridge)
>> +{
>> + return container_of(bridge, struct ge_b850v3_lvds_dp, bridge);
>> +}
>> +
>> +static inline struct ge_b850v3_lvds_dp *
>> + connector_to_ge_b850v3_lvds_dp(struct drm_connector *connector)
>> +{
>> + return container_of(connector, struct ge_b850v3_lvds_dp, connector);
>> +}
>> +
>> +u8 *stdp2690_get_edid(struct i2c_client *client)
>> +{
>> + struct i2c_adapter *adapter = client->adapter;
>> + unsigned char start = 0x00;
>> + unsigned int total_size;
>> + u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
>> +
>> + struct i2c_msg msgs[] = {
>> + {
>> + .addr = client->addr,
>> + .flags = 0,
>> + .len = 1,
>> + .buf = &start,
>> + }, {
>> + .addr = client->addr,
>> + .flags = I2C_M_RD,
>> + .len = EDID_LENGTH,
>> + .buf = block,
>> + }
>> + };
>> +
>> + if (!block)
>> + return NULL;
>> +
>> + if (i2c_transfer(adapter, msgs, 2) != 2) {
>> + DRM_ERROR("Unable to read EDID.\n");
>> + goto err;
>> + }
>> +
>> + if (!drm_edid_block_valid(block, 0, false, NULL)) {
>> + DRM_ERROR("Invalid EDID block\n");
>> + goto err;
>> + }
>> +
>> + total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
>> + if (total_size > EDID_LENGTH) {
>> + kfree(block);
>> + block = kmalloc(total_size, GFP_KERNEL);
>> + if (!block)
>> + return NULL;
>> +
>> + /* Yes, read the entire buffer, and do not skip the first
>> + * EDID_LENGTH bytes.
>> + */
>> + start = 0x00;
>> + msgs[1].len = total_size;
>> + msgs[1].buf = block;
>> +
>> + if (i2c_transfer(adapter, msgs, 2) != 2) {
>> + DRM_ERROR("Unable to read EDID extension blocks.\n");
>> + goto err;
>> + }
>> + }
>> +
>> + return block;
>> +
>> +err:
>> + kfree(block);
>> + return NULL;
>> +}
>> +
>> +static int ge_b850v3_lvds_dp_get_modes(struct drm_connector *connector)
>> +{
>> + struct ge_b850v3_lvds_dp *ptn_bridge;
>> + struct i2c_client *client;
>> + int num_modes = 0;
>> +
>> + ptn_bridge = connector_to_ge_b850v3_lvds_dp(connector);
>> + client = ptn_bridge->edid_i2c;
>> +
>> + mutex_lock(&ptn_bridge->lock);
>> +
>> + kfree(ptn_bridge->edid);
>> + ptn_bridge->edid = (struct edid *) stdp2690_get_edid(client);
>> +
>> + if (ptn_bridge->edid) {
>> + drm_mode_connector_update_edid_property(connector,
>> + ptn_bridge->edid);
>> + num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
>> + }
>> +
>> + mutex_unlock(&ptn_bridge->lock);
>> +
>> + return num_modes;
>> +}
>> +
>> +
>> +static enum drm_mode_status ge_b850v3_lvds_dp_mode_valid(
>> + struct drm_connector *connector, struct drm_display_mode *mode)
>> +{
>> + if (mode->clock > MAX_PIXEL_CLOCK) {
>> + DRM_INFO("The pixel clock for the mode %s is too high, and not supported.",
>> + mode->name);
>> + return MODE_CLOCK_HIGH;
>> + }
>> +
>> + return MODE_OK;
>> +}
>> +
>> +static const struct
>> +drm_connector_helper_funcs ge_b850v3_lvds_dp_connector_helper_funcs = {
>> + .get_modes = ge_b850v3_lvds_dp_get_modes,
>> + .mode_valid = ge_b850v3_lvds_dp_mode_valid,
>> +};
>> +
>> +static enum drm_connector_status ge_b850v3_lvds_dp_detect(
>> + struct drm_connector *connector, bool force)
>> +{
>> + struct ge_b850v3_lvds_dp *ptn_bridge =
>> + connector_to_ge_b850v3_lvds_dp(connector);
>> + struct i2c_client *ge_b850v3_lvds_dp_i2c =
>> + ptn_bridge->ge_b850v3_lvds_dp_i2c;
>> + s32 link_state;
>> +
>> + link_state = i2c_smbus_read_word_data(ge_b850v3_lvds_dp_i2c,
>> + STDP4028_DPTX_STS_REG);
>> +
>> + if (link_state == STDP4028_CON_STATE_CONNECTED)
>> + return connector_status_connected;
>> +
>> + if (link_state == 0)
>> + return connector_status_disconnected;
>> +
>> + return connector_status_unknown;
>> +}
>> +
>> +static const struct drm_connector_funcs ge_b850v3_lvds_dp_connector_funcs = {
>> + .dpms = drm_atomic_helper_connector_dpms,
>> + .fill_modes = drm_helper_probe_single_connector_modes,
>> + .detect = ge_b850v3_lvds_dp_detect,
>> + .destroy = drm_connector_cleanup,
>> + .reset = drm_atomic_helper_connector_reset,
>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static irqreturn_t ge_b850v3_lvds_dp_irq_handler(int irq, void *dev_id)
>> +{
>> + struct ge_b850v3_lvds_dp *ptn_bridge = dev_id;
>> + struct i2c_client *ge_b850v3_lvds_dp_i2c
>> + = ptn_bridge->ge_b850v3_lvds_dp_i2c;
>> +
>> + mutex_lock(&ptn_bridge->lock);
>> +
>> + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
>> + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
>> +
>> + mutex_unlock(&ptn_bridge->lock);
>> +
>> + if (ptn_bridge->connector.dev)
>> + drm_kms_helper_hotplug_event(ptn_bridge->connector.dev);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int ge_b850v3_lvds_dp_attach(struct drm_bridge *bridge)
>> +{
>> + struct ge_b850v3_lvds_dp *ptn_bridge
>> + = bridge_to_ge_b850v3_lvds_dp(bridge);
>> + struct drm_connector *connector = &ptn_bridge->connector;
>> + struct i2c_client *ge_b850v3_lvds_dp_i2c
>> + = ptn_bridge->ge_b850v3_lvds_dp_i2c;
>> + int ret;
>> +
>> + if (!bridge->encoder) {
>> + DRM_ERROR("Parent encoder object not found");
>> + return -ENODEV;
>> + }
>> +
>> + connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> + drm_connector_helper_add(connector,
>> + &ge_b850v3_lvds_dp_connector_helper_funcs);
>> +
>> + ret = drm_connector_init(bridge->dev, connector,
>> + &ge_b850v3_lvds_dp_connector_funcs,
>> + DRM_MODE_CONNECTOR_DisplayPort);
>> + if (ret) {
>> + DRM_ERROR("Failed to initialize connector with drm\n");
>> + return ret;
>> + }
>> +
>> + drm_connector_register(connector);
>> + ret = drm_mode_connector_attach_encoder(connector, bridge->encoder);
>> + if (ret)
>> + return ret;
>> +
>> + drm_bridge_enable(bridge);
>> + if (ge_b850v3_lvds_dp_i2c->irq) {
>> + drm_helper_hpd_irq_event(connector->dev);
>> +
>> + ret = devm_request_threaded_irq(&ge_b850v3_lvds_dp_i2c->dev,
>> + ge_b850v3_lvds_dp_i2c->irq, NULL,
>> + ge_b850v3_lvds_dp_irq_handler,
>> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
>> + "ge-b850v3-lvds-dp", ptn_bridge);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct drm_bridge_funcs ge_b850v3_lvds_dp_funcs = {
>> + .attach = ge_b850v3_lvds_dp_attach,
>> +};
>> +
>> +static int ge_b850v3_lvds_dp_probe(struct i2c_client *ge_b850v3_lvds_dp_i2c,
>> + const struct i2c_device_id *id)
>> +{
>> + struct device *dev = &ge_b850v3_lvds_dp_i2c->dev;
>> + struct ge_b850v3_lvds_dp *ptn_bridge;
>> + int ret;
>> + u32 edid_i2c_reg;
>> +
>> + ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
>> + if (!ptn_bridge)
>> + return -ENOMEM;
>> +
>> + mutex_init(&ptn_bridge->lock);
>> +
>> + ptn_bridge->ge_b850v3_lvds_dp_i2c = ge_b850v3_lvds_dp_i2c;
>> + ptn_bridge->bridge.driver_private = ptn_bridge;
>> + i2c_set_clientdata(ge_b850v3_lvds_dp_i2c, ptn_bridge);
>> +
>> + ret = of_property_read_u32(dev->of_node, "edid-reg", &edid_i2c_reg);
>> + if (ret) {
>> + dev_err(dev, "edid-reg not specified, aborting...\n");
>> + return -ENODEV;
>> + }
>> +
>> + ptn_bridge->edid_i2c = devm_kzalloc(dev,
>> + sizeof(struct i2c_client), GFP_KERNEL);
>> +
>> + if (!ptn_bridge->edid_i2c)
>> + return -ENOMEM;
>> +
>> + memcpy(ptn_bridge->edid_i2c, ge_b850v3_lvds_dp_i2c,
>> + sizeof(struct i2c_client));
>> +
>> + ptn_bridge->edid_i2c->addr = (unsigned short) edid_i2c_reg;
>> +
>> + /*
>> + * Configures the bridge to re-enable interrupts after each ack. As
>> + * this is the first communication with the chip, fail on error.
>> + */
>> + ret = i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
>> + STDP4028_IRQ_OUT_CONF_REG, STDP4028_DPTX_DP_IRQ_EN);
>> + if (ret) {
>> + dev_err(dev, "i2c communication failed, aborting...\n");
>> + return ret;
>> + }
>> +
>> + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
>> + STDP4028_DPTX_IRQ_EN_REG, STDP4028_DPTX_IRQ_CONFIG);
>> +
>> + /* Clear pending interrupts since power up. */
>> + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
>> + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
>> +
>> + ptn_bridge->bridge.funcs = &ge_b850v3_lvds_dp_funcs;
>> + ptn_bridge->bridge.of_node = dev->of_node;
>> + ret = drm_bridge_add(&ptn_bridge->bridge);
>> + if (ret) {
>> + DRM_ERROR("Failed to add bridge\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ge_b850v3_lvds_dp_remove(struct i2c_client *ge_b850v3_lvds_dp_i2c)
>> +{
>> + struct ge_b850v3_lvds_dp *ptn_bridge =
>> + i2c_get_clientdata(ge_b850v3_lvds_dp_i2c);
>> +
>> + drm_bridge_remove(&ptn_bridge->bridge);
>> +
>> + kfree(ptn_bridge->edid);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct i2c_device_id ge_b850v3_lvds_dp_i2c_table[] = {
>> + {"b850v3-lvds-dp", 0},
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(i2c, ge_b850v3_lvds_dp_i2c_table);
>> +
>> +static const struct of_device_id ge_b850v3_lvds_dp_match[] = {
>> + { .compatible = "ge,b850v3-lvds-dp" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, ge_b850v3_lvds_dp_match);
>> +
>> +static struct i2c_driver ge_b850v3_lvds_dp_driver = {
>> + .id_table = ge_b850v3_lvds_dp_i2c_table,
>> + .probe = ge_b850v3_lvds_dp_probe,
>> + .remove = ge_b850v3_lvds_dp_remove,
>> + .driver = {
>> + .name = "b850v3-lvds-dp",
>> + .of_match_table = ge_b850v3_lvds_dp_match,
>> + },
>> +};
>> +module_i2c_driver(ge_b850v3_lvds_dp_driver);
>> +
>> +MODULE_AUTHOR("Peter Senna Tschudin <peter.senna at collabora.com>");
>> +MODULE_AUTHOR("Martyn Welch <martyn.welch at collabora.co.uk>");
>> +MODULE_DESCRIPTION("GE LVDS to DP++ display bridge)");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.5.5
>>
>
>
>
>
>
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the dri-devel
mailing list