[PATCH v5 1/3] drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
Bibby Hsieh
bibby.hsieh at mediatek.com
Thu Sep 29 03:02:13 UTC 2016
From: Junzhi Zhao <junzhi.zhao at mediatek.com>
The mtk_hdmi_send_infoframe have to
be run after PLL and PIXEL clock of HDMI enable.
Make sure that HDMI inforframes can be sent
successfully.
Signed-off-by: Junzhi Zhao <junzhi.zhao at mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 334562d..875b045 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1133,12 +1133,6 @@ static int mtk_hdmi_output_set_display_mode(struct mtk_hdmi *hdmi,
phy_power_on(hdmi->phy);
mtk_hdmi_aud_output_config(hdmi, mode);
- mtk_hdmi_setup_audio_infoframe(hdmi);
- mtk_hdmi_setup_avi_infoframe(hdmi, mode);
- mtk_hdmi_setup_spd_infoframe(hdmi, "mediatek", "On-chip HDMI");
- if (mode->flags & DRM_MODE_FLAG_3D_MASK)
- mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode);
-
mtk_hdmi_hw_vid_black(hdmi, false);
mtk_hdmi_hw_aud_unmute(hdmi);
mtk_hdmi_hw_send_av_unmute(hdmi);
@@ -1401,6 +1395,16 @@ static void mtk_hdmi_bridge_pre_enable(struct drm_bridge *bridge)
hdmi->powered = true;
}
+static void mtk_hdmi_send_infoframe(struct mtk_hdmi *hdmi,
+ struct drm_display_mode *mode)
+{
+ mtk_hdmi_setup_audio_infoframe(hdmi);
+ mtk_hdmi_setup_avi_infoframe(hdmi, mode);
+ mtk_hdmi_setup_spd_infoframe(hdmi, "mediatek", "On-chip HDMI");
+ if (mode->flags & DRM_MODE_FLAG_3D_MASK)
+ mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode);
+}
+
static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
@@ -1409,6 +1413,7 @@ static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge)
clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]);
clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]);
phy_power_on(hdmi->phy);
+ mtk_hdmi_send_infoframe(hdmi, &hdmi->mode);
hdmi->enabled = true;
}
--
1.7.9.5
More information about the dri-devel
mailing list