[PATCH v2 03/13] drm/meson: Add support for components

Daniel Vetter daniel at ffwll.ch
Tue Apr 4 08:59:31 UTC 2017


On Tue, Mar 21, 2017 at 04:25:40PM +0100, Neil Armstrong wrote:
> This patch adds support for optional components connected through the
> Device Tree endpoints scheme.
> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  drivers/gpu/drm/meson/meson_drv.c | 113 +++++++++++++++++++++++++++++++++-----
>  1 file changed, 99 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
> index bc562a0..a2e9f56 100644
> --- a/drivers/gpu/drm/meson/meson_drv.c
> +++ b/drivers/gpu/drm/meson/meson_drv.c
> @@ -24,6 +24,7 @@
>  #include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/platform_device.h>
> +#include <linux/component.h>
>  #include <linux/of_graph.h>
>  
>  #include <drm/drmP.h>
> @@ -150,9 +151,9 @@ static bool meson_vpu_has_available_connectors(struct device *dev)
>  	.max_register   = 0x1000,
>  };
>  
> -static int meson_drv_probe(struct platform_device *pdev)
> +static int meson_drv_bind(struct device *dev)
>  {
> -	struct device *dev = &pdev->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
>  	struct meson_drm *priv;
>  	struct drm_device *drm;
>  	struct resource *res;
> @@ -215,6 +216,15 @@ static int meson_drv_probe(struct platform_device *pdev)
>  
>  	drm_vblank_init(drm, 1);
>  	drm_mode_config_init(drm);
> +	drm->mode_config.max_width = 3840;
> +	drm->mode_config.max_height = 2160;
> +	drm->mode_config.funcs = &meson_mode_config_funcs;
> +
> +	/* Hardware Initialization */
> +
> +	meson_venc_init(priv);
> +	meson_vpp_init(priv);
> +	meson_viu_init(priv);
>  
>  	/* Encoder Initialization */
>  
> @@ -222,11 +232,11 @@ static int meson_drv_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto free_drm;
>  
> -	/* Hardware Initialization */
> -
> -	meson_venc_init(priv);
> -	meson_vpp_init(priv);
> -	meson_viu_init(priv);
> +	ret = component_bind_all(drm->dev, drm);
> +	if (ret) {
> +		dev_err(drm->dev, "Couldn't bind all components\n");
> +		goto free_drm;
> +	}
>  
>  	ret = meson_plane_create(priv);
>  	if (ret)
> @@ -241,9 +251,6 @@ static int meson_drv_probe(struct platform_device *pdev)
>  		goto free_drm;
>  
>  	drm_mode_config_reset(drm);
> -	drm->mode_config.max_width = 8192;
> -	drm->mode_config.max_height = 8192;
> -	drm->mode_config.funcs = &meson_mode_config_funcs;
>  
>  	priv->fbdev = drm_fbdev_cma_init(drm, 32,
>  					 drm->mode_config.num_connector);
> @@ -268,9 +275,9 @@ static int meson_drv_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> -static int meson_drv_remove(struct platform_device *pdev)
> +static void meson_drv_unbind(struct device *dev)
>  {
> -	struct drm_device *drm = dev_get_drvdata(&pdev->dev);
> +	struct drm_device *drm = dev_get_drvdata(dev);
>  	struct meson_drm *priv = drm->dev_private;
>  
>  	drm_dev_unregister(drm);
> @@ -280,9 +287,88 @@ static int meson_drv_remove(struct platform_device *pdev)
>  	drm_vblank_cleanup(drm);
>  	drm_dev_unref(drm);
>  
> -	return 0;
>  }
>  
> +static const struct component_master_ops meson_drv_master_ops = {
> +	.bind	= meson_drv_bind,
> +	.unbind	= meson_drv_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> +	DRM_DEBUG_DRIVER("Comparing of node %s with %s\n",
> +			 of_node_full_name(dev->of_node),
> +			 of_node_full_name(data));
> +
> +	return dev->of_node == data;
> +}
> +
> +/* Possible connectors nodes to ignore */
> +static const struct of_device_id connectors_match[] = {
> +	{ .compatible = "composite-video-connector" },
> +	{ .compatible = "svideo-connector" },
> +	{ .compatible = "hdmi-connector" },
> +	{ .compatible = "dvi-connector" },
> +	{}
> +};
> +
> +static int meson_probe_remote(struct platform_device *pdev,
> +			      struct component_match **match,
> +			      struct device_node *parent,
> +			      struct device_node *remote)
> +{
> +	struct device_node *ep, *remote_node;
> +	int count = 1;
> +
> +	/* If node is a connector, return and do not add to match table */
> +	if (of_match_node(connectors_match, remote))
> +		return 1;
> +
> +	component_match_add(&pdev->dev, match, compare_of, remote);
> +
> +	for_each_endpoint_of_node(remote, ep) {
> +		remote_node = of_graph_get_remote_port_parent(ep);
> +		if (!remote_node ||
> +		    remote_node == parent || /* Ignore parent endpoint */
> +		    !of_device_is_available(remote_node))
> +			continue;
> +
> +		count += meson_probe_remote(pdev, match, remote, remote_node);
> +
> +		of_node_put(remote_node);
> +	}
> +
> +	return count;
> +}
> +
> +static int meson_drv_probe(struct platform_device *pdev)
> +{
> +	struct component_match *match = NULL;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device_node *ep, *remote;
> +	int count = 0;
> +
> +	for_each_endpoint_of_node(np, ep) {
> +		remote = of_graph_get_remote_port_parent(ep);
> +		if (!remote || !of_device_is_available(remote))
> +			continue;
> +
> +		count += meson_probe_remote(pdev, &match, np, remote);
> +	}
> +
> +	/* If some endpoints were found, initialize the nodes */
> +	if (count) {

What if you have more than 1 endpoint described, but module load order
conspires against you to only initialize 1 at first?
-Daniel

> +		dev_info(&pdev->dev, "Queued %d outputs on vpu\n", count);
> +
> +		return component_master_add_with_match(&pdev->dev,
> +						       &meson_drv_master_ops,
> +						       match);
> +	}
> +
> +	/* If no output endpoints were available, simply bail out */
> +	return 0;
> +};
> +
>  static const struct of_device_id dt_match[] = {
>  	{ .compatible = "amlogic,meson-gxbb-vpu" },
>  	{ .compatible = "amlogic,meson-gxl-vpu" },
> @@ -293,7 +379,6 @@ static int meson_drv_remove(struct platform_device *pdev)
>  
>  static struct platform_driver meson_drm_platform_driver = {
>  	.probe      = meson_drv_probe,
> -	.remove     = meson_drv_remove,
>  	.driver     = {
>  		.name	= "meson-drm",
>  		.of_match_table = dt_match,
> -- 
> 1.9.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list