[PATCH v3 01/11] dt-bindings: add binding for the Allwinner DE2 CCU

Icenowy Zheng icenowy at aosc.io
Mon Apr 3 16:18:08 UTC 2017



在 2017年04月03日 23:33, Rob Herring 写道:
> On Thu, Mar 30, 2017 at 03:46:03AM +0800, Icenowy Zheng wrote:
>> From: Icenowy Zheng <icenowy at aosc.xyz>
>>
>> Allwinner "Display Engine 2.0" contains some clock controls in it.
>>
>> In order to add them as clock drivers, we need a device tree binding.
>> Add the binding here.
>>
>> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
>> ---
>> Changes in v3:
>> - Fill the address space length of DE2 CCU to 0x100000, just reach the start of mixer0.
>
> Why? You waste virtual memory space making this bigger than it needs to
> be. Not an issue so much for 64-bit.
>
>>
>>  .../devicetree/bindings/clock/sun8i-de2.txt        | 31 ++++++++++++++++++++++
>>  1 file changed, 31 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/sun8i-de2.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
>> new file mode 100644
>> index 000000000000..34cf79c05f13
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
>> @@ -0,0 +1,31 @@
>> +Allwinner Display Engine 2.0 Clock Control Binding
>> +--------------------------------------------------
>> +
>> +Required properties :
>> +- compatible: must contain one of the following compatibles:
>> +		- "allwinner,sun8i-a83t-de2-clk"
>> +		- "allwinner,sun50i-a64-de2-clk"
>> +		- "allwinner,sun50i-h5-de2-clk"
>> +
>> +- reg: Must contain the registers base address and length
>> +- clocks: phandle to the clocks feeding the display engine subsystem.
>> +	  Three are needed:
>> +  - "mod": the display engine module clock
>> +  - "bus": the bus clock for the whole display engine subsystem
>> +- clock-names: Must contain the clock names described just above
>> +- resets: phandle to the reset control for the display engine subsystem.
>> +- #clock-cells : must contain 1
>> +- #reset-cells : must contain 1
>> +
>> +Example:
>> +de2_clocks: clock at 01000000 {
>
> Drop the leading 0s. dtc in linux-next will now warn on this with W=1
> compile. Looks like sunxi has a lot of them. Please fix so we don't keep
> repeating this same copy-n-paste.

Thanks ;-)

I will try to kill them all ;-)

>
>> +	compatible = "allwinner,sun50i-a64-de2-clk";
>> +	reg = <0x01000000 0x100000>;
>> +	clocks = <&ccu CLK_DE>,
>> +		 <&ccu CLK_BUS_DE>;
>> +	clock-names = "mod",
>> +		      "bus";
>> +	resets = <&ccu RST_BUS_DE>;
>> +	#clock-cells = <1>;
>> +	#reset-cells = <1>;
>> +};
>> --
>> 2.12.0
>>


More information about the dri-devel mailing list