[PATCH] drm: bridge: dw-hdmi: fix input format/encoding from plat_data

[Neil Armstrong]

The plat_data->input_bus_format and plat_data->input_bus_encoding
are unsigned long and are alsways >=0, but the value 0 was still
considered as RGB888 like the default behaviour.

This patch changes the if test to > 0.

Thanks to Dan Carpenter for his bug report at [1].

Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip
RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough).

[1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda

Cc: Dan Carpenter <dan.carpenter at oracle.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 8b60503..100e1ee 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1668,14 +1668,14 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
 	hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
 
 	/* TOFIX: Get input format from plat data or fallback to RGB888 */
-	if (hdmi->plat_data->input_bus_format >= 0)
+	if (hdmi->plat_data->input_bus_format)
 		hdmi->hdmi_data.enc_in_bus_format =
 			hdmi->plat_data->input_bus_format;
 	else
 		hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 
 	/* TOFIX: Get input encoding from plat data or fallback to none */
-	if (hdmi->plat_data->input_bus_encoding >= 0)
+	if (hdmi->plat_data->input_bus_encoding)
 		hdmi->hdmi_data.enc_in_encoding =
 			hdmi->plat_data->input_bus_encoding;
 	else
-- 
1.9.1