[Intel-gfx] [PATCH] drm/atomic: Add connector atomic_check function.
Pandiyan, Dhinakaran
dhinakaran.pandiyan at intel.com
Thu Apr 6 01:27:41 UTC 2017
On Wed, 2017-04-05 at 12:06 +0200, Daniel Vetter wrote:
> On Wed, Apr 05, 2017 at 10:41:24AM +0200, Maarten Lankhorst wrote:
> > The connector atomic check function may be called multiple times,
> > or not at all. It's mostly useful for implementing properties but if you
> > call check_modeset twice it can be used for other modeset related checks
> > as well.
> >
> > Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > ---
> > drivers/gpu/drm/drm_atomic_helper.c | 25 +++++++++++++++++----
> > include/drm/drm_modeset_helper_vtables.h | 37 ++++++++++++++++++++++++++++++++
> > 2 files changed, 58 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> > index c3994b4d5f32..d550e79e8347 100644
> > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > @@ -459,10 +459,20 @@ mode_fixup(struct drm_atomic_state *state)
> > *
> > * Check the state object to see if the requested state is physically possible.
> > * This does all the crtc and connector related computations for an atomic
> > - * update and adds any additional connectors needed for full modesets and calls
> > - * down into &drm_crtc_helper_funcs.mode_fixup and
> > - * &drm_encoder_helper_funcs.mode_fixup or
> > - * &drm_encoder_helper_funcs.atomic_check functions of the driver backend.
> > + * update and adds any additional connectors needed for full modesets. It calls
> > + * the various per-object callbacks in the follow order:
> > + *
> > + * 1. &drm_connector_helper_funcs.atomic_best_encoder for determining the new encoder.
> > + * 2. &drm_connector_helper_funcs.atomic_check to validate the connector state.
> > + * 3. If it's determined a modeset is needed then all connectors on the affected crtc
> > + * crtc are added.
Typo - 'crtc' typed twice.
update_output_state which is called before _helper_check_modeset() also
adds all affected connectors. Why is that not considered when you say
affected connectors are added in Step 3? Is that because
update_output_state() is in the legacy modeset path?
> > + * 4. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
> > + * 5. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state.
> > + * This function is only called when the encoder will be part of a configured crtc,
> > + * it must not be used for implementing connector property validation.
> > + * If this function is NULL, &drm_atomic_encoder_helper_funcs.mode_fixup is called
> > + * instead.
> > + * 6. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with crtc constraints.
>
> Line too I think. And maybe insert empty lines between each item, to make
> them stand out more. Shouldn't affect rendering, but better to recheck.
>
> > *
> > * &drm_crtc_state.mode_changed is set when the input mode is changed.
> > * &drm_crtc_state.connectors_changed is set when a connector is added or
> > @@ -522,6 +532,8 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
> > return ret;
> >
> > for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) {
> > + const struct drm_connector_helper_funcs *funcs = connector->helper_private;
> > +
> > /*
> > * This only sets crtc->connectors_changed for routing changes,
> > * drivers must set crtc->connectors_changed themselves when
> > @@ -539,6 +551,11 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
> > new_connector_state->link_status)
> > new_crtc_state->connectors_changed = true;
> > }
> > +
> > + if (funcs->atomic_check)
> > + ret = funcs->atomic_check(connector, new_connector_state);
> > + if (ret)
> > + return ret;
> > }
> >
> > /*
> > diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
> > index b304950b402d..7b5dd909f189 100644
> > --- a/include/drm/drm_modeset_helper_vtables.h
> > +++ b/include/drm/drm_modeset_helper_vtables.h
> > @@ -860,6 +860,43 @@ struct drm_connector_helper_funcs {
> > */
> > struct drm_encoder *(*atomic_best_encoder)(struct drm_connector *connector,
> > struct drm_connector_state *connector_state);
> > +
> > + /**
> > + * @atomic_check:
> > + *
> > + * Drivers should check connector properties in this
> > + * hook. This function is called from &drm_atomic_helper_check_modeset.
> > + *
> > + * This function may not be called at all on a modeset or connector
> > + * change, so it should only be used to validate properties.
I did not understand this part - "function may not be called at all on a
modeset or connector change". Why is that?
> > + * If it's required to validate all connectors from there, call
> > + * &drm_atomic_helper_check_modeset twice. This will result in
s/twice/again ?
> > + * atomic_check possibly being called twice as well, which the callback
&drm_connector_helper_funcs.atomic_check?
I had to read this a couple of times to understand, but I guess, that's
mostly me trying to piece things together.
-DK
> > + * should be made to handle correctly.
> > + *
> > + * This function is also allowed to inspect any other object's state and
> > + * can add more state objects to the atomic commit if needed. Care must
> > + * be taken though to ensure that state check and compute functions for
> > + * these added states are all called, and derived state in other objects
> > + * all updated. Again the recommendation is to just call check helpers
> > + * until a maximal configuration is reached.
>
> I think it'd be good to highlight setting connectors_changed from this
> callback:
>
> "If this callback determines that the property change requires a full
> modeset, it can set &drm_crtc_state->connectors_changed to steer the
> control flow in drm_atomic_helper_check_modeset()."
>
> With those nits addressed, Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
> Would be good to get DK to r-b the patch too before merging, just for
> practice and coordination.
>
> Cheers, Daniel
>
> > + *
> > + * NOTE:
> > + *
> > + * This function is called in the check phase of an atomic update. The
> > + * driver is not allowed to change anything outside of the free-standing
> > + * state objects passed-in or assembled in the overall &drm_atomic_state
> > + * update tracking structure.
> > + *
> > + * RETURNS:
> > + *
> > + * 0 on success, -EINVAL if the state or the transition can't be
> > + * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
> > + * attempt to obtain another state object ran into a &drm_modeset_lock
> > + * deadlock.
> > + */
> > + int (*atomic_check)(struct drm_connector *connector,
> > + struct drm_connector_state *state);
> > };
> >
> > /**
> > --
> > 2.7.4
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
More information about the dri-devel
mailing list