[PATCH 6/7] drm/exynos/decon5433: use mode info stored in CRTC to detect i80 mode
Inki Dae
inki.dae at samsung.com
Tue Aug 1 10:02:08 UTC 2017
Seems you mixed some different changes below with one patch.
1. add checking panel mode with i80_mode.
2. change te_irq to irq_te.
3. add new function, decon_atomic_check.
4. add considering more error cases in decon_conf_irq function.
5. register command and video mode interrupt handlers regardless of panel mode.
And the subject of this patch doesn't say everything to above changes.
Thanks,
Inki Dae
2017년 04월 18일 21:40에 Andrzej Hajda 이(가) 쓴 글:
> Since panel's mode of work is propagated properly from panel to DECON,
> there is no need to use redundant private property. The only issue with
> such approach is that check for required interrupts should be postponed
> until panel communicate its requirements - ie to atomic_check.
>
> Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
> ---
> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 98 ++++++++++++++++-----------
> 1 file changed, 57 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
> index 237b4c9..7a09e03 100644
> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
> @@ -34,9 +34,8 @@
> #define WINDOWS_NR 3
> #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
>
> -#define IFTYPE_I80 (1 << 0)
> -#define I80_HW_TRG (1 << 1)
> -#define IFTYPE_HDMI (1 << 2)
> +#define I80_HW_TRG (1 << 0)
> +#define IFTYPE_HDMI (1 << 1)
>
> static const char * const decon_clks_name[] = {
> "pclk",
> @@ -58,7 +57,9 @@ struct decon_context {
> struct regmap *sysreg;
> struct clk *clks[ARRAY_SIZE(decon_clks_name)];
> unsigned int irq;
> - unsigned int te_irq;
> + unsigned int irq_vsync;
> + unsigned int irq_lcd_sys;
> + unsigned int irq_te;
> unsigned long out_type;
> int first_win;
> spinlock_t vblank_lock;
> @@ -91,7 +92,7 @@ static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
> u32 val;
>
> val = VIDINTCON0_INTEN;
> - if (ctx->out_type & IFTYPE_I80)
> + if (crtc->i80_mode)
> val |= VIDINTCON0_FRAMEDONE;
> else
> val |= VIDINTCON0_INTFRMEN | VIDINTCON0_FRAMESEL_FP;
> @@ -100,7 +101,7 @@ static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
>
> enable_irq(ctx->irq);
> if (!(ctx->out_type & I80_HW_TRG))
> - enable_irq(ctx->te_irq);
> + enable_irq(ctx->irq_te);
>
> return 0;
> }
> @@ -110,7 +111,7 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
> struct decon_context *ctx = crtc->ctx;
>
> if (!(ctx->out_type & I80_HW_TRG))
> - disable_irq_nosync(ctx->te_irq);
> + disable_irq_nosync(ctx->irq_te);
> disable_irq_nosync(ctx->irq);
>
> writel(0, ctx->addr + DECON_VIDINTCON0);
> @@ -140,7 +141,7 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end)
>
> switch (status & (VIDCON1_VSTATUS_MASK | VIDCON1_I80_ACTIVE)) {
> case VIDCON1_VSTATUS_VS:
> - if (!(ctx->out_type & IFTYPE_I80))
> + if (!(ctx->crtc->i80_mode))
> --frm;
> break;
> case VIDCON1_VSTATUS_BP:
> @@ -167,7 +168,7 @@ static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc)
>
> static void decon_setup_trigger(struct decon_context *ctx)
> {
> - if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)))
> + if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG))
> return;
>
> if (!(ctx->out_type & I80_HW_TRG)) {
> @@ -207,7 +208,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
> val = VIDOUT_LCD_ON;
> if (interlaced)
> val |= VIDOUT_INTERLACE_EN_F;
> - if (ctx->out_type & IFTYPE_I80) {
> + if (crtc->i80_mode) {
> val |= VIDOUT_COMMAND_IF;
> } else {
> val |= VIDOUT_RGB_IF;
> @@ -223,7 +224,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
> VIDTCON2_HOZVAL(m->hdisplay - 1);
> writel(val, ctx->addr + DECON_VIDTCON2);
>
> - if (!(ctx->out_type & IFTYPE_I80)) {
> + if (!crtc->i80_mode) {
> int vbp = m->crtc_vtotal - m->crtc_vsync_end;
> int vfp = m->crtc_vsync_start - m->crtc_vdisplay;
>
> @@ -456,7 +457,7 @@ static void decon_disable(struct exynos_drm_crtc *crtc)
> int i;
>
> if (!(ctx->out_type & I80_HW_TRG))
> - synchronize_irq(ctx->te_irq);
> + synchronize_irq(ctx->irq_te);
> synchronize_irq(ctx->irq);
>
> /*
> @@ -511,6 +512,22 @@ static void decon_clear_channels(struct exynos_drm_crtc *crtc)
> clk_disable_unprepare(ctx->clks[i]);
> }
>
> +static int decon_atomic_check(struct exynos_drm_crtc *crtc,
> + struct drm_crtc_state *state)
> +{
> + struct decon_context *ctx = crtc->ctx;
> +
> + ctx->irq = crtc->i80_mode ? ctx->irq_lcd_sys : ctx->irq_vsync;
> +
> + if (ctx->irq)
> + return 0;
> +
> + dev_err(ctx->dev, "Panel requires %s mode, but appropriate interrupt is not provided.\n",
> + crtc->i80_mode ? "command" : "video");
> +
> + return -EINVAL;
> +}
> +
> static const struct exynos_drm_crtc_ops decon_crtc_ops = {
> .enable = decon_enable,
> .disable = decon_disable,
> @@ -521,6 +538,7 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
> .update_plane = decon_update_plane,
> .disable_plane = decon_disable_plane,
> .atomic_flush = decon_atomic_flush,
> + .atomic_check = decon_atomic_check,
> };
>
> static int decon_bind(struct device *dev, struct device *master, void *data)
> @@ -670,19 +688,22 @@ static const struct of_device_id exynos5433_decon_driver_dt_match[] = {
> MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match);
>
> static int decon_conf_irq(struct decon_context *ctx, const char *name,
> - irq_handler_t handler, unsigned long int flags, bool required)
> + irq_handler_t handler, unsigned long int flags)
> {
> struct platform_device *pdev = to_platform_device(ctx->dev);
> int ret, irq = platform_get_irq_byname(pdev, name);
>
> if (irq < 0) {
> - if (irq == -EPROBE_DEFER)
> + switch (irq) {
> + case -EPROBE_DEFER:
> + return irq;
> + case -ENODATA:
> + case -ENXIO:
> + return 0;
> + default:
> + dev_err(ctx->dev, "IRQ %s get failed, %d\n", name, irq);
> return irq;
> - if (required)
> - dev_err(ctx->dev, "cannot get %s IRQ\n", name);
> - else
> - irq = 0;
> - return irq;
> + }
> }
> irq_set_status_flags(irq, IRQ_NOAUTOEN);
> ret = devm_request_irq(ctx->dev, irq, handler, flags, "drm_decon", ctx);
> @@ -710,11 +731,8 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
> ctx->out_type = (unsigned long)of_device_get_match_data(dev);
> spin_lock_init(&ctx->vblank_lock);
>
> - if (ctx->out_type & IFTYPE_HDMI) {
> + if (ctx->out_type & IFTYPE_HDMI)
> ctx->first_win = 1;
> - } else if (of_get_child_by_name(dev->of_node, "i80-if-timings")) {
> - ctx->out_type |= IFTYPE_I80;
> - }
>
> for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
> struct clk *clk;
> @@ -738,25 +756,23 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
> return PTR_ERR(ctx->addr);
> }
>
> - if (ctx->out_type & IFTYPE_I80) {
> - ret = decon_conf_irq(ctx, "lcd_sys", decon_irq_handler, 0, true);
> - if (ret < 0)
> - return ret;
> - ctx->irq = ret;
> + ret = decon_conf_irq(ctx, "vsync", decon_irq_handler, 0);
> + if (ret < 0)
> + return ret;
> + ctx->irq_vsync = ret;
>
> - ret = decon_conf_irq(ctx, "te", decon_te_irq_handler,
> - IRQF_TRIGGER_RISING, false);
> - if (ret < 0)
> - return ret;
> - if (ret) {
> - ctx->te_irq = ret;
> - ctx->out_type &= ~I80_HW_TRG;
> - }
> - } else {
> - ret = decon_conf_irq(ctx, "vsync", decon_irq_handler, 0, true);
> - if (ret < 0)
> - return ret;
> - ctx->irq = ret;
> + ret = decon_conf_irq(ctx, "lcd_sys", decon_irq_handler, 0);
> + if (ret < 0)
> + return ret;
> + ctx->irq_lcd_sys = ret;
> +
> + ret = decon_conf_irq(ctx, "te", decon_te_irq_handler,
> + IRQF_TRIGGER_RISING);
> + if (ret < 0)
> + return ret;
> + if (ret) {
> + ctx->irq_te = ret;
> + ctx->out_type &= ~I80_HW_TRG;
> }
>
> if (ctx->out_type & I80_HW_TRG) {
>
More information about the dri-devel
mailing list