[PATCH v2 1/4] drm/atomic: implement drm_atomic_helper_commit_tail for runtime_pm users

Wed Aug 2 13:57:30 UTC 2017

On Wed, Aug 02, 2017 at 04:49:16PM +0300, Laurent Pinchart wrote:
> Hi Liviu,
> 
> On Wednesday 02 Aug 2017 14:32:06 Liviu Dudau wrote:
> > On Wed, Aug 02, 2017 at 04:27:27PM +0300, Laurent Pinchart wrote:
> > > On Wednesday 02 Aug 2017 13:46:48 Liviu Dudau wrote:
> > >> On Wed, Aug 02, 2017 at 01:27:23PM +0200, Daniel Vetter wrote:
> > >>> On Wed, Aug 2, 2017 at 1:20 PM, Liviu Dudau wrote:
> > >>>> On Thu, Jul 20, 2017 at 03:01:16PM +0200, Maxime Ripard wrote:
> > >>>>> +/**
> > >>>>> + * drm_atomic_helper_commit_tail_rpm - commit atomic update to
> > >>>>> hardware
> > >>>>> + * @old_state: new modeset state to be committed
> > >>>>> + *
> > >>>>> + * This is an alternative implementation for the
> > >>>>> + * &drm_mode_config_helper_funcs.atomic_commit_tail hook, for
> > >>>>> drivers
> > >>>>> + * that support runtime_pm or need the CRTC to be enabled to
> > >>>>> perform a
> > >>>>> + * commit. Otherwise, one should use the default implementation
> > >>>>> + * drm_atomic_helper_commit_tail().
> > >>>>> + */
> > >>>>> +void drm_atomic_helper_commit_tail_rpm(struct drm_atomic_state
> > >>>>> *old_state)
> > >>>>> +{
> > >>>>> +     struct drm_device *dev = old_state->dev;
> > >>>>> +
> > >>>>> +     drm_atomic_helper_commit_modeset_disables(dev, old_state);
> > >>>>> +
> > >>>>> +     drm_atomic_helper_commit_modeset_enables(dev, old_state);
> > >>>>> +
> > >>>>> +     drm_atomic_helper_commit_planes(dev, old_state,
> > >>>>> +                                     DRM_PLANE_COMMIT_ACTIVE_ONLY);
> > >>>>> +
> > >>>>> +     drm_atomic_helper_commit_hw_done(old_state);
> > >>>>> +
> > >>>>> +     drm_atomic_helper_wait_for_vblanks(dev, old_state);
> > >>>>> +
> > >>>>> +     drm_atomic_helper_cleanup_planes(dev, old_state);
> > >>>>> +}
> > >>>>> +EXPORT_SYMBOL(drm_atomic_helper_commit_tail_rpm);
> > >>>>> +
> > >>>> 
> > >>>> Given that this function is supposed to be used by runtime PM aware
> > >>>> drivers and that the hook is called from the DRM core, should there
> > >>>> not be some pm_runtime_{get,put} calls wrapping the body of this
> > >>>> function?
> > >> 
> > >> Hi Daniel,
> > >> 
> > >>> No, because the drm atomic helpers have no idea which device is
> > >>> backing which part of the drm device. Some drivers might on have one
> > >>> device for the entire driver, some one device for just the display
> > >>> part (which might or might not match drm_device->dev). And many arm
> > >>> drivers have a device for each block separately (and you need to call
> > >>> rpm_get/put on each). And some something in-between (e.g. core device
> > >>> + external encoders).
> > >> 
> > >> Hmm, I understand your point about this function not having to care
> > >> about pm_runtime_{get,put}, but I do not agree with your view that if it
> > >> wanted to care about it, it wouldn't be able to do the right thing
> > >> because it doesn't have the right device. After all, this function is
> > >> about handling the updates that this atomic commit is concerned about,
> > >> so having the old_state->dev drm_device pointer and its associated device
> > >> should be enough. Am I missing something?
> > > 
> > > In embedded system it's quite common for display hardware to be made of
> > > multiple IP cores. Depending on the SoC you could have to manage runtime
> > > PM at the CRTC level for instance. The DRM core doesn't know about that,
> > > and sees a single device only.
> > > 
> > > I've expressed my doubts previously about the need for a RPM version of
> > > drm_atomic_helper_commit_tail(), as the resulting order of CRTC
> > > enable/disable and plane update operations can lead to corrupt frames
> > > when enabling the CRTC. I had a commit tail implementation in the rcar-du
> > > driver that was very similar to drm_atomic_helper_commit_tail_rpm(), and
> > > had to move back to the standard order to fix the corrupt frame issue.
> > > The result isn't as clean as I would like, as power handling is split
> > > between the CRTC enable/disable and the atomic begin/flush in a way that
> > > is not straightforward.
> > > 
> > > It now occurred to me that a simpler implementation could be possible.
> > > I'll have to experiment with it first, but the idea is as follows.
> > > 
> > > 1 Call pm_runtime_get_sync() at the beginning of .commit_tail() and
> > > pm_runtime_put() at the end.
> > > 
> > > 2. Use the standard CRTC disable, plane update, CRTC enable order in
> > > .commit_tail().
> > > 
> > > 3. Call pm_runtime_get() in the CRTC .enable() handler and
> > > pm_runtime_put() in the CRTC .disable() handler;
> > 
> > Well, that is what mali-dp driver currently does, but according to Daniel
> > (and I can see his POV) that is wrong.
> 
> Is it ? I might not have understood his arguments the same way (or possibly 
> failed to even see them). Are you referring to this comments in this mail 
> thread, or to something else ?

I'm talking about his reply above. My understanding: you can't do
pm_runtime_{get,set} in the atomic_commit_tail hook because:

 1. you don't know if you have the correct drm_device->dev (or all the
 relevant devices) to call pm_runtime_get() on.
 2. If pm_runtime_get() affects in any way the atomic commit behaviour by
 being at the top of the commit_tail_rpm() function then you are:
    a) papering over bugs in one's driver
    b) going to turn off things at the end of commit_tail_rpm() function
    when you call pm_runtime_put() so your changes are going to be lost.

> 
> > I'm playing with removing all of that to see if there are any side effects
> > in Mali DP like the ones you mentioned for RCAR.
> 
> Note that the first frame will usually not be noticed as it often takes a few 
> frames for the display to turn on.

Yes, and I have a TV connected to the output that takes ages to sync. But I
can usually run some quick rmmmod+insmod tests and the TV would be too slow
to turn off the output, so I can see if there are any artifacts.

Best regards,
Liviu

> 
> > > This should guarantee that the device won't be suspended between CRTC
> > > disable and CRTC enable during a mode set, without requiring any special
> > > collaboration between CRTC enable/disable and atomic begin/flush to
> > > handle runtime PM. If drivers implement this, there should be no need for
> > > drm_atomic_helper_commit_tail_rpm().
> > > 
> > > Maxime, Daniel, what do you think about this ?
> > > 
> > >>> I don't think there's anything the helpers can to to help support
> > >>> this.
> > >>> 
> > >>> Also, just wrapping functions with rpm_get/put only papers over bugs
> > >>> in your driver - either you enable something, then the rpm_get needs
> > >>> to be done anyway (since the hw will be shut down otherwise), or you
> > >>> disable something, same reasons. The only thing a rpm_get/put does is
> > >>> paper over the bugs where you try to access the hw when it's off. As
> > >>> soon as this function finishes, the hw is shut down again, drops all
> > >> register values on the floor, so either that access wasn't needed, or
> > >>> your driver has a bug (because it assumes the register values survive
> > >>> when they don't).
> > >>> 
> > >>> So imo all around a bad idea, at least from my experience of doing rpm
> > >>> enabling on i915 hw.
> > >> 
> > >> Understood. Thanks!
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯