[PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display

[Noralf Trønnes]

Den 03.08.2017 19.11, skrev Andy Shevchenko:
> On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
> <andy.shevchenko at gmail.com> wrote:
>> On Thu, Aug 3, 2017 at 6:18 PM, David Lechner <david at lechnology.com> wrote:
>>
>>> The particular display I have is this one:
>>> http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/
>>>
>>> It looks like it uses a command/data scheme like the MIPI displays, but
>>> doesn't use any of the standard values for the commands. The controller can
>>> do parallel, SPI and I2C, but the display I have is wired for I2C.
>> It looks very similar to ssd1306. Some description refers to ssd1308.
> http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf
>

That pdf refers to another one: 
http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/
There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and ssd1309:
https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt
http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c
Maybe the ssd1308 will work with that driver...

Noralf.