[PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display

David Lechner david at lechnology.com
Fri Aug 4 01:16:54 UTC 2017


On 08/03/2017 08:08 PM, David Lechner wrote:
> On 08/03/2017 03:11 PM, Noralf Trønnes wrote:
>>
>> Den 03.08.2017 19.11, skrev Andy Shevchenko:
>>> On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
>>> <andy.shevchenko at gmail.com> wrote:
>>>> On Thu, Aug 3, 2017 at 6:18 PM, David Lechner <david at lechnology.com> 
>>>> wrote:
>>>>
>>>>> The particular display I have is this one:
>>>>> http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/
>>>>>
>>>>> It looks like it uses a command/data scheme like the MIPI displays, 
>>>>> but
>>>>> doesn't use any of the standard values for the commands. The 
>>>>> controller can
>>>>> do parallel, SPI and I2C, but the display I have is wired for I2C.
>>>> It looks very similar to ssd1306. Some description refers to ssd1308.
>>> http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf
>>>
>>
>> That pdf refers to another one: 
>> http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/
>> There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and 
>> ssd1309:
>> https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt 
>>
>> http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c 
>>
>> Maybe the ssd1308 will work with that driver...
>>
> 
> The display I have uses a ssd1327 controller. It is 16-bit grayscale. 
> The ssd130x are all 1-bit monochrome. So, probably more like the ssd1325 
> driver in fbftf.

correction, 4-bit grayscale


More information about the dri-devel mailing list