[PATCH v3 2/6] drm/tinydrm: generalize tinydrm_xrgb8888_to_gray8()
Noralf Trønnes
noralf at tronnes.org
Fri Aug 4 07:27:17 UTC 2017
Den 04.08.2017 00.33, skrev David Lechner:
> This adds parameters for vaddr and clip to tinydrm_xrgb8888_to_gray8() to
> make it more generic.
>
> dma_buf_{begin,end}_cpu_access() are moved out to the repaper driver.
>
> Signed-off-by: David Lechner <david at lechnology.com>
> ---
> drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c | 35 ++++++++++----------------
> drivers/gpu/drm/tinydrm/repaper.c | 21 +++++++++++++++-
> include/drm/tinydrm/tinydrm-helpers.h | 3 ++-
> 3 files changed, 35 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
> index 75808bb..5915ba8 100644
> --- a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
> +++ b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
> @@ -185,7 +185,9 @@ EXPORT_SYMBOL(tinydrm_xrgb8888_to_rgb565);
> /**
> * tinydrm_xrgb8888_to_gray8 - Convert XRGB8888 to grayscale
> * @dst: 8-bit grayscale destination buffer
> + * @vaddr: XRGB8888 source buffer
> * @fb: DRM framebuffer
> + * @clip: Clip rectangle area to copy
> *
> * Drm doesn't have native monochrome or grayscale support.
> * Such drivers can announce the commonly supported XR24 format to userspace
> @@ -199,12 +201,11 @@ EXPORT_SYMBOL(tinydrm_xrgb8888_to_rgb565);
> * Returns:
> * Zero on success, negative error code on failure.
> */
> -int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb)
> +int tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
> + struct drm_clip_rect *clip)
> {
> - struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
> - struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
> - unsigned int x, y, pitch = fb->pitches[0];
> - int ret = 0;
> + unsigned int len = (clip->x2 - clip->x1) * sizeof(u32);
> + unsigned int x, y;
> void *buf;
> u32 *src;
>
> @@ -214,22 +215,16 @@ int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb)
> * The cma memory is write-combined so reads are uncached.
> * Speed up by fetching one line at a time.
> */
> - buf = kmalloc(pitch, GFP_KERNEL);
> + buf = kmalloc(len, GFP_KERNEL);
> if (!buf)
> return -ENOMEM;
>
> - if (import_attach) {
> - ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
> - DMA_FROM_DEVICE);
> - if (ret)
> - goto err_free;
> - }
> -
> - for (y = 0; y < fb->height; y++) {
> - src = cma_obj->vaddr + (y * pitch);
> - memcpy(buf, src, pitch);
> + for (y = clip->y1; y < clip->y2; y++) {
> + src = vaddr + (y * fb->pitches[0]);
> + src += clip->x1;
> + memcpy(buf, src, len);
> src = buf;
> - for (x = 0; x < fb->width; x++) {
> + for (x = clip->x1; x < clip->x2; x++) {
> u8 r = (*src & 0x00ff0000) >> 16;
> u8 g = (*src & 0x0000ff00) >> 8;
> u8 b = *src & 0x000000ff;
> @@ -240,13 +235,9 @@ int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb)
> }
> }
>
> - if (import_attach)
> - ret = dma_buf_end_cpu_access(import_attach->dmabuf,
> - DMA_FROM_DEVICE);
> -err_free:
> kfree(buf);
>
> - return ret;
> + return 0;
> }
> EXPORT_SYMBOL(tinydrm_xrgb8888_to_gray8);
>
> diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c
> index 3343d3f..d34cd9b 100644
> --- a/drivers/gpu/drm/tinydrm/repaper.c
> +++ b/drivers/gpu/drm/tinydrm/repaper.c
> @@ -18,6 +18,7 @@
> */
>
> #include <linux/delay.h>
> +#include <linux/dma-buf.h>
> #include <linux/gpio/consumer.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> @@ -525,11 +526,20 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
> struct drm_clip_rect *clips,
> unsigned int num_clips)
> {
> + struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
> + struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
> struct tinydrm_device *tdev = fb->dev->dev_private;
> struct repaper_epd *epd = epd_from_tinydrm(tdev);
> + struct drm_clip_rect clip;
> u8 *buf = NULL;
> int ret = 0;
>
> + /* repaper can't do partial updates */
> + clip.x1 = 0;
> + clip.x2 = fb->width;
> + clip.y1 = 0;
> + clip.y2 = fb->height;
> +
> mutex_lock(&tdev->dirty_lock);
>
> if (!epd->enabled)
> @@ -550,7 +560,16 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
> goto out_unlock;
> }
>
> - ret = tinydrm_xrgb8888_to_gray8(buf, fb);
> + if (import_attach) {
> + ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
> + DMA_FROM_DEVICE);
> + if (ret)
> + goto out_unlock;
> + }
> +
> + ret = tinydrm_xrgb8888_to_gray8(buf, cma_obj->vaddr, fb, &clip);
> + if (import_attach)
> + dma_buf_end_cpu_access(import_attach->dmabuf, DMA_FROM_DEVICE);
I think we can make tinydrm_xrgb8888_to_gray8() return void like the
other copy functions. We loose the error if the line buffer can't be
allocated, but that's no big deal. If we can't allocate <4k of memory,
then we have much bigger problems elsewhere.
This simplifies returning an error from dma_buf_end_cpu_access().
The error is propagated to userspace who called the dirty ioctl.
When I have switched from cma to shmem buffers backing the framebuffer
(ongoing work), we don't need the line buffer copy to speed up the
uncached reads from write combined memory mappings. But we will
probably need it on buffers imported with PRIME, since we don't know
the memory mapping. At least I don't think we can find that out.
Noralf.
> if (ret)
> goto out_unlock;
>
> diff --git a/include/drm/tinydrm/tinydrm-helpers.h b/include/drm/tinydrm/tinydrm-helpers.h
> index a6c387f..9e13ef5 100644
> --- a/include/drm/tinydrm/tinydrm-helpers.h
> +++ b/include/drm/tinydrm/tinydrm-helpers.h
> @@ -43,7 +43,8 @@ void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb,
> void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr,
> struct drm_framebuffer *fb,
> struct drm_clip_rect *clip, bool swap);
> -int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb);
> +int tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
> + struct drm_clip_rect *clip);
>
> struct backlight_device *tinydrm_of_find_backlight(struct device *dev);
> int tinydrm_enable_backlight(struct backlight_device *backlight);
More information about the dri-devel
mailing list