[PATCH v3 13/35] drm: omapdrm: dsi: Store DSI model and PLL hardware data in OF data
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Fri Aug 4 22:43:57 UTC 2017
The DSI PLL hardware data and DSS channels are selected based on the
OMAP SoC model. There's no need for fine-grained model information, as
the driver only needs to differentiate between OMAP3, OMAP4 and OMAP5.
As this can be done through the DSI compatible string, store the
corresponding information in OF match data instead to avoid accessing
the OMAP SoC model.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
Changes since v2:
- Rename dsi_device_type to dsi_model
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 116 ++++++++++++++++++--------------------
1 file changed, 55 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index d32e56c5f657..3d98e9ce9a43 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -230,6 +230,12 @@ static int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel);
#define DSI_MAX_NR_ISRS 2
#define DSI_MAX_NR_LANES 5
+enum dsi_model {
+ DSI_MODEL_OMAP3,
+ DSI_MODEL_OMAP4,
+ DSI_MODEL_OMAP5,
+};
+
enum dsi_lane_function {
DSI_LANE_UNUSED = 0,
DSI_LANE_CLK,
@@ -301,12 +307,24 @@ struct dsi_lp_clock_info {
u16 lp_clk_div;
};
+struct dsi_module_id_data {
+ u32 address;
+ int id;
+};
+
+struct dsi_of_data {
+ enum dsi_model model;
+ const struct dss_pll_hw *pll_hw;
+ const struct dsi_module_id_data *modules;
+};
+
struct dsi_data {
struct platform_device *pdev;
void __iomem *proto_base;
void __iomem *phy_base;
void __iomem *pll_base;
+ const struct dsi_of_data *data;
int module_id;
int irq;
@@ -400,11 +418,6 @@ struct dsi_packet_sent_handler_data {
struct completion *completion;
};
-struct dsi_module_id_data {
- u32 address;
- int id;
-};
-
static const struct of_device_id dsi_of_match[];
#ifdef DSI_PERF_MEASURE
@@ -4918,24 +4931,14 @@ static int dsi_set_config(struct omap_dss_device *dssdev,
* the channel in some more dynamic manner, or get the channel as a user
* parameter.
*/
-static enum omap_channel dsi_get_channel(int module_id)
+static enum omap_channel dsi_get_channel(struct dsi_data *dsi)
{
- switch (omapdss_get_version()) {
- case OMAPDSS_VER_OMAP24xx:
- case OMAPDSS_VER_AM43xx:
- DSSWARN("DSI not supported\n");
- return OMAP_DSS_CHANNEL_LCD;
-
- case OMAPDSS_VER_OMAP34xx_ES1:
- case OMAPDSS_VER_OMAP34xx_ES3:
- case OMAPDSS_VER_OMAP3630:
- case OMAPDSS_VER_AM35xx:
+ switch (dsi->data->model) {
+ case DSI_MODEL_OMAP3:
return OMAP_DSS_CHANNEL_LCD;
- case OMAPDSS_VER_OMAP4430_ES1:
- case OMAPDSS_VER_OMAP4430_ES2:
- case OMAPDSS_VER_OMAP4:
- switch (module_id) {
+ case DSI_MODEL_OMAP4:
+ switch (dsi->module_id) {
case 0:
return OMAP_DSS_CHANNEL_LCD;
case 1:
@@ -4945,8 +4948,8 @@ static enum omap_channel dsi_get_channel(int module_id)
return OMAP_DSS_CHANNEL_LCD;
}
- case OMAPDSS_VER_OMAP5:
- switch (module_id) {
+ case DSI_MODEL_OMAP5:
+ switch (dsi->module_id) {
case 0:
return OMAP_DSS_CHANNEL_LCD;
case 1:
@@ -5126,7 +5129,7 @@ static void dsi_init_output(struct platform_device *dsidev)
out->output_type = OMAP_DISPLAY_TYPE_DSI;
out->name = dsi->module_id == 0 ? "dsi.0" : "dsi.1";
- out->dispc_channel = dsi_get_channel(dsi->module_id);
+ out->dispc_channel = dsi_get_channel(dsi);
out->ops.dsi = &dsi_ops;
out->owner = THIS_MODULE;
@@ -5301,29 +5304,7 @@ static int dsi_init_pll_data(struct platform_device *dsidev)
pll->id = dsi->module_id == 0 ? DSS_PLL_DSI1 : DSS_PLL_DSI2;
pll->clkin = clk;
pll->base = dsi->pll_base;
-
- switch (omapdss_get_version()) {
- case OMAPDSS_VER_OMAP34xx_ES1:
- case OMAPDSS_VER_OMAP34xx_ES3:
- case OMAPDSS_VER_OMAP3630:
- case OMAPDSS_VER_AM35xx:
- pll->hw = &dss_omap3_dsi_pll_hw;
- break;
-
- case OMAPDSS_VER_OMAP4430_ES1:
- case OMAPDSS_VER_OMAP4430_ES2:
- case OMAPDSS_VER_OMAP4:
- pll->hw = &dss_omap4_dsi_pll_hw;
- break;
-
- case OMAPDSS_VER_OMAP5:
- pll->hw = &dss_omap5_dsi_pll_hw;
- break;
-
- default:
- return -ENODEV;
- }
-
+ pll->hw = dsi->data->pll_hw;
pll->ops = &dsi_pll_ops;
r = dss_pll_register(pll);
@@ -5400,7 +5381,8 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
return r;
}
- d = of_match_node(dsi_of_match, dsidev->dev.of_node)->data;
+ dsi->data = of_match_node(dsi_of_match, dsidev->dev.of_node)->data;
+ d = dsi->data->modules;
while (d->address != 0 && d->address != dsi_mem->start)
d++;
@@ -5571,27 +5553,39 @@ static const struct dev_pm_ops dsi_pm_ops = {
.runtime_resume = dsi_runtime_resume,
};
-static const struct dsi_module_id_data dsi_of_data_omap3[] = {
- { .address = 0x4804fc00, .id = 0, },
- { },
+static const struct dsi_of_data dsi_of_data_omap3 = {
+ .model = DSI_MODEL_OMAP3,
+ .pll_hw = &dss_omap3_dsi_pll_hw,
+ .modules = (const struct dsi_module_id_data[]) {
+ { .address = 0x4804fc00, .id = 0, },
+ { },
+ },
};
-static const struct dsi_module_id_data dsi_of_data_omap4[] = {
- { .address = 0x58004000, .id = 0, },
- { .address = 0x58005000, .id = 1, },
- { },
+static const struct dsi_of_data dsi_of_data_omap4 = {
+ .model = DSI_MODEL_OMAP4,
+ .pll_hw = &dss_omap4_dsi_pll_hw,
+ .modules = (const struct dsi_module_id_data[]) {
+ { .address = 0x58004000, .id = 0, },
+ { .address = 0x58005000, .id = 1, },
+ { },
+ },
};
-static const struct dsi_module_id_data dsi_of_data_omap5[] = {
- { .address = 0x58004000, .id = 0, },
- { .address = 0x58009000, .id = 1, },
- { },
+static const struct dsi_of_data dsi_of_data_omap5 = {
+ .model = DSI_MODEL_OMAP5,
+ .pll_hw = &dss_omap5_dsi_pll_hw,
+ .modules = (const struct dsi_module_id_data[]) {
+ { .address = 0x58004000, .id = 0, },
+ { .address = 0x58009000, .id = 1, },
+ { },
+ },
};
static const struct of_device_id dsi_of_match[] = {
- { .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
- { .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
- { .compatible = "ti,omap5-dsi", .data = dsi_of_data_omap5, },
+ { .compatible = "ti,omap3-dsi", .data = &dsi_of_data_omap3, },
+ { .compatible = "ti,omap4-dsi", .data = &dsi_of_data_omap4, },
+ { .compatible = "ti,omap5-dsi", .data = &dsi_of_data_omap5, },
{},
};
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list