[PATCHv3 0/4] tegra-cec: add Tegra HDMI CEC support

[Hans Verkuil]

From: Hans Verkuil <hans.verkuil at cisco.com>

This patch series adds support for the Tegra CEC functionality.

It has this prerequisite: https://patchwork.linuxtv.org/patch/42521/

That patch has been merged in 4.13-rc4.

The first patch documents the CEC bindings, the second adds support
for this to tegra124.dtsi and enables it for the Jetson TK1.

The third patch adds the CEC driver itself and the final patch adds
the cec notifier support to the drm/tegra driver in order to notify
the CEC driver whenever the physical address changes.

I expect that the dts changes apply as well to the Tegra X1/X2 and possibly
other Tegra SoCs, but I can only test this with my Jetson TK1 board.

The dt-bindings and the tegra-cec driver would go in through the media
subsystem, the drm/tegra part through the drm subsystem and the dts
changes through (I guess) the linux-tegra developers. Luckily they are
all independent of one another.

To test this you need the CEC utilities from git://linuxtv.org/v4l-utils.git.

To build this:

git clone git://linuxtv.org/v4l-utils.git
cd v4l-utils
./bootstrap.sh; ./configure
make
sudo make install # optional, you really only need utils/cec*

To test:

cec-ctl --playback # configure as playback device
cec-ctl -Subject # detect all connected CEC devices

See here for the public CEC API:

https://hverkuil.home.xs4all.nl/spec/uapi/cec/cec-api.html

Regards,

	Hans

Changes since v1:

- Update the bindings doc so it no longer refers to 'driver', instead it
  only refers to the hardware.
- Add 'select CEC_CORE if CEC_NOTIFIER' to Kconfig. If the tegra-cec driver
  is a module and the drm tegra driver is built-in, then the CEC core
  will be a module also, causing the CEC notifier to fail (will be
  compiled as empty functions). This select forces the correct dependency.
  (Note: this was posted separately as a v2 patch)

Hans Verkuil (4):
  dt-bindings: document the tegra CEC bindings
  ARM: tegra: add CEC support to tegra124.dtsi
  tegra-cec: add Tegra HDMI CEC driver
  drm/tegra: add cec-notifier support

 .../devicetree/bindings/media/tegra-cec.txt        |  27 ++
 MAINTAINERS                                        |   8 +
 arch/arm/boot/dts/tegra124-jetson-tk1.dts          |   4 +
 arch/arm/boot/dts/tegra124.dtsi                    |  12 +-
 drivers/gpu/drm/tegra/Kconfig                      |   1 +
 drivers/gpu/drm/tegra/drm.h                        |   3 +
 drivers/gpu/drm/tegra/hdmi.c                       |   9 +
 drivers/gpu/drm/tegra/output.c                     |   6 +
 drivers/media/platform/Kconfig                     |  11 +
 drivers/media/platform/Makefile                    |   2 +
 drivers/media/platform/tegra-cec/Makefile          |   1 +
 drivers/media/platform/tegra-cec/tegra_cec.c       | 506 +++++++++++++++++++++
 drivers/media/platform/tegra-cec/tegra_cec.h       | 127 ++++++
 13 files changed, 716 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt
 create mode 100644 drivers/media/platform/tegra-cec/Makefile
 create mode 100644 drivers/media/platform/tegra-cec/tegra_cec.c
 create mode 100644 drivers/media/platform/tegra-cec/tegra_cec.h

-- 
2.13.2