[PATCH v2 2/2] dt-bindings: Add INNOLUX P097PFG panel bindings

[Lin Huang]

The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.

Signed-off-by: Lin Huang <hl at rock-chips.com>
---
 .../devicetree/bindings/display/panel/innolux,p079zca.txt     | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
index d0f5516..8cadd8c 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
@@ -1,13 +1,18 @@
 Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
 
 Required properties:
-- compatible: should be "innolux,p079zca"
+- compatible: should be should be one of the following.
+    -"innolux,p079zca" for Innolux 7.9" P079ZCA 768*1024 panel
+    -"innolux,p097pfg" for Innolux 9.7" P097PFG 1536*2048 panel
 - reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
 - enable-gpios: panel enable gpio
 
 Optional properties:
 - backlight: phandle of the backlight device attached to the panel
+- power-supply: phandle of the regulator that provides the supply voltage
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
 
 Example:
 
@@ -16,6 +21,8 @@ Example:
 			compatible = "innolux,p079zca";
 			reg = <0>;
 			power-supply = <...>;
+			avdd-supply = <...>;
+			avee-supply = <...>;
 			backlight = <&backlight>;
 			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-- 
2.7.4