[PATCH v3 0/3] drm/omap: Support for dispc memory bandwidth limit
Tomi Valkeinen
tomi.valkeinen at ti.com
Fri Dec 1 11:54:46 UTC 2017
On 30/11/17 14:12, Peter Ujfalusi wrote:
> Hi,
>
> Changes since v2:
> - Rebased on drm-next (v2 was based on drm-next and my
> 'drm/omap: Module parameter for display order configuration' series, thus it
> was not applying cleanly.
> - Added Acked-by from Rob to the dt-binding changes
>
> Changes since v1:
> - Use the crtc->mode_valid and not connector->mode_valid as the limit is really
> posed by the 'crtc' (DISPC)
> - Bandwidth calculation changed: do the calculation in place + extended comment
> - looked for better place to document the max-memory-bandwidth, but
> can not find any suitable document. Creating a new txt file for only one
> property did not seemed feasable.
>
> This series will add simple memory bandwidth limit support to reject modes
> which, if used with one plane in full size would fail the limit.
>
> Regards,
> Peter
> ---
> Peter Ujfalusi (3):
> dt-bindings: display/ti: Add optional property to set memory bandwidth
> limit
> drm/omap: dss: Add support for reporting memory bandwidth limitation
> drm/omap: Filter displays mode based on bandwidth limit
>
> .../devicetree/bindings/display/ti/ti,dra7-dss.txt | 5 +++
> .../bindings/display/ti/ti,omap2-dss.txt | 4 +++
> .../bindings/display/ti/ti,omap3-dss.txt | 4 +++
> .../bindings/display/ti/ti,omap4-dss.txt | 4 +++
> .../bindings/display/ti/ti,omap5-dss.txt | 4 +++
> drivers/gpu/drm/omapdrm/dss/dispc.c | 13 ++++++++
> drivers/gpu/drm/omapdrm/dss/omapdss.h | 2 ++
> drivers/gpu/drm/omapdrm/omap_crtc.c | 37 ++++++++++++++++++++++
> drivers/gpu/drm/omapdrm/omap_drv.c | 5 +++
> drivers/gpu/drm/omapdrm/omap_drv.h | 3 ++
> 10 files changed, 81 insertions(+)
>
Thanks, I have applied this series.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the dri-devel
mailing list