[PATCH v2 2/7] drm/i2c: tda998x: move CEC device initialisation later
Hans Verkuil
hverkuil at xs4all.nl
Wed Dec 6 13:54:04 UTC 2017
On 12/06/17 13:35, Russell King wrote:
> We no longer use the CEC client to access the CEC part itself, so we can
> move this later in the initialisation sequence.
>
> Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> ---
> drivers/gpu/drm/i2c/tda998x_drv.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 7f4dbca7f7f4..4aeac2127974 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -1490,9 +1490,6 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
> priv->cec_addr = 0x34 + (client->addr & 0x03);
> priv->current_page = 0xff;
> priv->hdmi = client;
> - priv->cec = i2c_new_dummy(client->adapter, priv->cec_addr);
> - if (!priv->cec)
> - return -ENODEV;
>
> /* wake up the device: */
> cec_write(priv, REG_CEC_ENAMODS,
> @@ -1546,6 +1543,10 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
> CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
>
> /* initialize the optional IRQ */
> + priv->cec = i2c_new_dummy(client->adapter, priv->cec_addr);
> + if (!priv->cec)
> + return -ENODEV;
> +
I'd move this up to before the 'initialize the optional IRQ' comment, since
that should stay with the 'if (client->irq) {' line below.
> if (client->irq) {
> unsigned long irq_flags;
>
>
After that change you can add my:
Acked-by: Hans Verkuil <hans.verkuil at cisco.com>
Regards,
Hans
More information about the dri-devel
mailing list