[PATCH v2 3/7] drm/i2c: tda998x: fix error cleanup paths
Russell King
rmk+kernel at armlinux.org.uk
Wed Dec 6 12:35:34 UTC 2017
If tda998x_get_audio_ports() fails, and we requested the interrupt, we
fail to free the interrupt before returning failure. Rework the failure
cleanup code and exit paths so that we always clean up properly after an
error, and always propagate the error code.
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 4aeac2127974..661cb8915f2f 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -1499,10 +1499,15 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
/* read version: */
rev_lo = reg_read(priv, REG_VERSION_LSB);
+ if (rev_lo < 0) {
+ dev_err(&client->dev, "failed to read version: %d\n", rev_lo);
+ return rev_lo;
+ }
+
rev_hi = reg_read(priv, REG_VERSION_MSB);
- if (rev_lo < 0 || rev_hi < 0) {
- ret = rev_lo < 0 ? rev_lo : rev_hi;
- goto fail;
+ if (rev_hi < 0) {
+ dev_err(&client->dev, "failed to read version: %d\n", rev_hi);
+ return rev_hi;
}
priv->rev = rev_lo | rev_hi << 8;
@@ -1526,7 +1531,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
default:
dev_err(&client->dev, "found unsupported device: %04x\n",
priv->rev);
- goto fail;
+ return -ENXIO;
}
/* after reset, enable DDC: */
@@ -1568,7 +1573,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
dev_err(&client->dev,
"failed to request IRQ#%u: %d\n",
client->irq, ret);
- goto fail;
+ goto err_irq;
}
/* enable HPD irq */
@@ -1591,19 +1596,19 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
ret = tda998x_get_audio_ports(priv, np);
if (ret)
- goto fail;
+ goto err_audio;
if (priv->audio_port[0].format != AFMT_UNUSED)
tda998x_audio_codec_init(priv, &client->dev);
return 0;
-fail:
- /* if encoder_init fails, the encoder slave is never registered,
- * so cleanup here:
- */
- if (priv->cec)
- i2c_unregister_device(priv->cec);
- return -ENXIO;
+
+err_audio:
+ if (client->irq)
+ free_irq(client->irq, priv);
+err_irq:
+ i2c_unregister_device(priv->cec);
+ return ret;
}
static void tda998x_encoder_prepare(struct drm_encoder *encoder)
--
2.7.4
More information about the dri-devel
mailing list