[PATCH v2 7/7] dt-bindings: tda998x: add the calibration gpio

Russell King rmk+kernel at armlinux.org.uk
Wed Dec 6 12:35:54 UTC 2017


Add the optional calibration gpio for integrated TDA9950 CEC support.
This GPIO corresponds with the interrupt from the TDA998x, as the
calibration requires driving the interrupt pin low.

Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
 Documentation/devicetree/bindings/display/bridge/tda998x.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index 24cc2466185a..1a4eaca40d94 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
@@ -27,6 +27,9 @@ Required properties;
 	in question is used. The implementation allows one or two DAIs. If two
 	DAIs are defined, they must be of different type.
 
+  - nxp,calib-gpios: calibration GPIO, which must correspond with the
+	gpio used for the TDA998x interrupt pin.
+
 [1] Documentation/sound/alsa/soc/DAI.txt
 [2] include/dt-bindings/display/tda998x.h
 
-- 
2.7.4



More information about the dri-devel mailing list