[PATCH v2 6/7] drm/i2c: tda998x: add CEC support
Russell King - ARM Linux
linux at armlinux.org.uk
Fri Dec 8 11:57:15 UTC 2017
On Wed, Dec 06, 2017 at 02:50:44PM +0100, Hans Verkuil wrote:
> Hi Russell,
> Thanks for this patch series!
> On 12/06/17 13:35, Russell King wrote:
> > The TDA998x is a HDMI transmitter with a TDA9950 CEC engine integrated
> > onto the same die. Add support for the TDA9950 CEC engine to the
> > TDA998x driver.
> > Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> > ---
> > drivers/gpu/drm/i2c/Kconfig | 1 +
> > drivers/gpu/drm/i2c/tda998x_drv.c | 209 +++++++++++++++++++++++++++++++++++---
> > 2 files changed, 196 insertions(+), 14 deletions(-)
> > diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
> > index 3a232f5ff0a1..096d2139e733 100644
> > --- a/drivers/gpu/drm/i2c/Kconfig
> > +++ b/drivers/gpu/drm/i2c/Kconfig
> > @@ -22,6 +22,7 @@ config DRM_I2C_SIL164
> > config DRM_I2C_NXP_TDA998X
> > tristate "NXP Semiconductors TDA998X HDMI encoder"
> > default m if DRM_TILCDC
> > + select CEC_NOTIFIER
> I believe this should be 'select CEC_CORE if CEC_NOTIFIER', conform the
> other drivers that do something similar.
> Otherwise if tda9950 is configured as a module, and this as built-in, then
> cec is built as a module as well and this can't find the cec functions from
> the module.
You mean when we have:
That appears to work fine with:
in 4.14, as that's exactly the configuration I test with on Dove. Maybe
that's changed recently, or maybe I haven't noticed it not working (I
can't test it at the moment, sorry.)
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
More information about the dri-devel